Best Threaded Rod Cutters

JWL 1 Cane Walking Stick Handle Shift Knob Ball Style Cast Aluminum with Threaded Rod Connector

• Cast Polished Aluminum Ball Handle with threaded rod connector provided.
• Very Strong Cast Aluminum material tapped to receive threaded rod.
• 3/8" x 16 threaded rod 2" long connector to attach handle to cane shaft.
• 2 1/4" high by 1 1/2" in diameter & 15/16" where base meets the shaft.
• Base at connection point is about 15/16" to 1 " diameter.

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

• Fully threaded rods are widely applied in many occasions..
• Used for assembly fastening, screw into threaded nuts or tapped holes..
• 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

• Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
• Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
• The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
• Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
• It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
• Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
• Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....

LABOR SAVING DEVICES 81-000 Creep-Zit Fiberglass Wire Running Kit green

• Pro 36ft kit, threaded connector wire running rod.
• 1 luminous Fiber Fuse 6ft push/pull rod with male & female threaded connector ends.
• 5 Fiber Fuse 6ft push/pull rods with male & female threaded connector ends.

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

• EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
• Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
• SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
• Our strut compressor features detent pins that keeps the strut spring in place during compression.
• Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
• STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
• Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
• WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
• Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
• WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
• Attach the threaded rods so that the hooks are set 180° apart.
• Evenly compress both sides of the strut spring compression tool.

BOSCH 92813C 5/16 In Arbor for Slotting Cutters

• Compatible with cutters 85526M, 85527M, 85528M, 88829M, and 92837.
• Recommended for use with a routing guide.
• May be used with router table for production work.

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

• 【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
• 【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
• 【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
• 【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
• 13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
• 【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

• Threaded fasteners for joining two male threads, most commonly threaded rod.
• Used to make up long rod assemblies from shorter lengths of rods.
• Similar to hex nuts with extreme height measurements giving them length.
• Use with fasteners of the same threading and finish.

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

• 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
• 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
• The fully threaded rods & studs can be drilled, cut, heated and shaped.
• 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
• 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.

mingya Cutting Plier Tool Fencing Pliers, Red, 20*5*1.5 cm / 7.8*2*0.6 inch / L*W*H

• 1. WIDELY USED. The wire cutter opening at 20 degrees, cutting distance could up to 0.4 inch. 2 sharp objects on the handle enable to pull nail and wire with ease. Suitable for cut chains, wire, mesh, threaded rod, heavy gauge wire etc in Shop, Home Or Service Field..
• 2. LONG LASTING. The wire cutters use drop forged hardened alloy steel jaws, Through Integral heat treatment and high frequency quenching treatment for high hardness. Black oxide finish could anti corrosion. Cutting edges hardness about 64 hrc..
• 3. HUMANIZED DESIGH. Lever design for excellent cutting performance. Non-slip plastic soft handle can be hold comfortably and firmly even when your hands are wet. Spring could help you open cutter easily. Wire latch holds handles together when not in use. Occupy less space..
• 4. SAVING YOUR COST. Reinforced rivets allow pliers to be attached tightly and will not drop easily, ensuring a longer service life. The ergonomic handles help prevent hand fatigue during using..
• 5. WARRANTY 6 MONTHS, If Quality Problems, A full refund or a new replacement can be arranged in warranty. Any problem please contact me. Please kindly advise free for your concerns.

uxcell M8 x 200mm 304 Stainless Steel Fully Threaded Rods Fasteners Silver Tone 5 Pcs

Shooter's Choice 9mm Pistol Cleaning Kit

• Solid brass rod section with female 8/32 threaded end and swivel handle for easy cleaning.
• Brass component adaptor, 20 count 2. 5”x2. 5” cleaning patches, Nylon All-Purpose cleaning brush, 9mm brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.

WORKPRO W017014 Ratchet Bolt Cutter, Heat Treated Alloy Steel Jaws, 24 inch, (1 Pack)

• Heavy-duty design, induction-hardened chrome molybdenum steel jaws for durability and hardness.
• ratcheting mechanism minimize hand fatigue.
• Long handles provide high leverage, reduce pressure on hand while using.
• 24-inch bolt cutters cuts through bolts, chains, padlocks, threaded rods, rivets, wires and many other metals up to 40HRC.
• Ergonomic bi-material grip for greater control and comfort.
• 50 % less force required to cut than traditional cutters.