Categories

Best Threaded Rod Square Nuts

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

  • Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
  • Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
  • The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
  • Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
  • It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
  • Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
  • Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....
Check Stock

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

  • 1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Zinc plate over steel - more rust resistant.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
Check Stock

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

  • Fully threaded rods are widely applied in many occasions..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

  • Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
  • Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
  • These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..
Check Stock

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

  • Threaded fasteners for joining two male threads, most commonly threaded rod.
  • Used to make up long rod assemblies from shorter lengths of rods.
  • Similar to hex nuts with extreme height measurements giving them length.
  • Use with fasteners of the same threading and finish.
Check Stock

Feelers 304 Stainless Steel M6-1.0 Fully All Threaded Rod, Long Threaded Screw, Right Hand Threads, 250mm Length【Pack of 2】

  • Material: Made of 304 stainless steel, ductility at high temperatures, and low magnetic permeability..
  • Package including 2 pcs rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Different Length of the rod can be widely used in many occasions. Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

Feelers 304 Stainless Steel M8-1.25 Fully All Threaded Rod, Long Threaded Screw, Right Hand Threads, 250mm Length【Pack of 2】

  • Material: Made of 304 stainless steel, ductility at high temperatures, and low magnetic permeability..
  • Package including 2 pcs rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Different Length of the rod can be widely used in many occasions. Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

MroMax M3 Square Nuts 304 Stainless Steel Metric Coarse Thread Assortment Kit Silver Tone 100Pcs

  • ✅【MATERIAL】- These Square Nuts is made of 304 stainless steel, Finish: Steel finished, anti-rust.These quality assortment washers for home, automotive, and shop use.
  • ✅【FEATURE】- Square Nuts designed to stand off the material to allow easy weld penetration,widely used to industrial machine..
  • ✅【APPLICATION】- Strong and antirust, great for both indoor and outdoor use.Great replacement for industrial and construction fasteners,also can be a important accessories in your daily life..
  • ✅【PACKAGE CONTENT】- 100Pcs x 304 Stainless Steel Square Nuts.
Check Stock

100pcs M5-0.8mm Stainless Steel Square Nuts ，Metric Coarse Thread

  • [PACKAGE INCLUDED]- 100 Pieces M5 Stainless Steel Square Nuts..
  • [FEATURE] -Different types of square nuts,designed to stand off the material to allow easy weld penetration..
  • [APPLICATION] - Widely used to industrial machine..
Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

Awclub Fully Threaded Rod, M6-1.0 Thread Pitch, 30mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 20pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 20Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

Evolution Metal Cutting Chop Saw with 14-Inch Mild Steel Blade with Universal Adjustable Stand Bundle (2 Items)

  • Bundle Includes: Evolution S355CPSL Metal Cutting Chop Saw with 14-Inch Mild Steel Blade and Evolution Power Tools EVOCS2 Universal Adjustable Metal Chop Saw Stand.
  • Fast and Secure Clamping: It features a quick-release vise with a robust square-threaded rod for fast and secure clamping. It features a quick-release vise with a robust square-threaded rod for fast and secure clamping. An attachable v-shape block is included for secure clamping of round and square tube.
  • Design: The saw’s compact design with a head lock down pin and carry handle makes it easy for transportation. Its chip deflector directs chips away from the operator and reduces cleaning time.
  • Steel Vice: It has an accurate and durable cast steel vice with 0 to 45-degree- miter capacity.
  • Ergonomics: The S355CPSL has an ergonomic, ambidextrous trigger with a comfortable textured grip. It provides easy blade change with integrated tool storage.
Check Stock

Awclub Fully Threaded Rod, M8-1.25 Thread Pitch, 70mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 10pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 10Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock