Categories

Best Threaded Rods And Nuts

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

8 Pack 1/4-20 X 7/8\ Long Hex Coupling Nut with Zinc Plate NCUP004C000STLZN

  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
  • Country of Origin: Taiwan, Province Of China.
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

  • Fully threaded rods are widely applied in many occasions..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
Check Stock

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

  • 1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Zinc plate over steel - more rust resistant.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

  • Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
  • Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
  • These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..
Check Stock

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

  • Threaded fasteners for joining two male threads, most commonly threaded rod.
  • Used to make up long rod assemblies from shorter lengths of rods.
  • Similar to hex nuts with extreme height measurements giving them length.
  • Use with fasteners of the same threading and finish.
Check Stock

Smartsails M8 x 200mm，304 Stainless Steel Full Threaded Rod, Right Hand Thread (4 Pieces)

  • ▼ Size Name:M8*200 mm Material : 304 stainless steel.
  • ▼ 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • ▼ Fully threaded rods are widely applied in many occasions..
  • ▼ Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

uxcell 5Pcs M3 x 300mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads

  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • Fully threaded rods are widely applied in many occasions.Note: the two ends of the stainless steel shaft are slightly deformed due to the cutting process and are not completely round. you can polish it before use..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

Moxon Vise Hardware Kit with 2 each 8 Inch x 3/4-10 Threaded Rods, 2 each 4-1/2 Inch Cast Knobs and 4 each 3/4 inch Nuts and Washers

  • ... performed. It raises the workpiece to a more comfortable and ergonomic height. It is highly portable and can be quickly mounted anywhere on a bench or table, and when not in use, easily stowed away on a shelf or hung on a wall..
  • This Moxon Vise hardware kit is quite economical, yet contains high-quality 3/4-10 threaded rods (NOT Acme threads), nuts, washers and cast knobs. This hardware kit contains everything needed (minus the wood) to make a fully functional Moxon vise..
  • This kit does not come with detailed plans or measured drawings but includes a comprehensive manual with numerous design considerations allowing you to build a custom Moxon vise that suits your personal needs..
  • This kit contains 2 each 8 inch 3/4-10 threaded rods (NOT Acme threads), 2 each 4-1/2 inch cast two-prong knobs and 4 each 3/4 inch nuts and washers. For a more traditional look and feel, all metal parts are made from unfinished steel..
Check Stock

Moxon Vise Hardware Kit with 2 each 8 Inch x 3/4-10 Threaded Rods, 2 each 4-1/2 Inch Cast Handles and 4 each 3/4 inch Nuts and Washers

  • ... performed. It raises the workpiece to a more comfortable and ergonomic height. It is highly portable and can be quickly mounted anywhere on a bench or table, and when not in use, easily stowed away on a shelf or hung on a wall..
  • This Moxon Vise hardware kit is quite economical, yet contains high-quality 3/4-10 threaded rods (NOT Acme threads), nuts, washers and cast knobs. This hardware kit contains everything needed (minus the wood) to make a fully functional Moxon vise..
  • This kit does not come with detailed plans or measured drawings but includes a comprehensive manual with numerous design considerations allowing you to build a custom Moxon vise that suits your personal needs..
  • This kit contains 2 each 8 inch 3/4-10 threaded rods (NOT Acme threads), 2 each 4-1/2 inch cast single-prong handles and 4 each 3/4 inch nuts and washers. For a more traditional look and feel, all metal parts are made from unfinished steel..
Check Stock

Awclub Fully Threaded Rod, M6-1.0 Thread Pitch, 30mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 20pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 20Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

Awclub Fully Threaded Rod, M8-1.25 Thread Pitch, 70mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 10pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 10Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock