Categories

Best Threaded Spout

DANCO Replacement Tub Spout with Diverter, Chrome, 5-Inch, Fitting 1/2-Inch or 3/4-Inch IPS, 1-Set (80765)

  • HASSLE-FREE INSTALLATION: You will need pipe thread tape, a flat head screwdriver, adjustable pliers and a Philips screwdriver.
  • CHROME FINISH resists corrosion and tarnishing while creating a bright, refreshing feel for your bathroom.
  • Replacement tub spout with diverter is designed to fit 1/2 in. or 3/4 in. IPS end-threaded stub out nipple (adapter included).
  • Before installing tub spout, be sure to wrap two to four turns of Thread Tape onto threaded end of stub out nipple.
  • Diverter included allowing water to flow upward to the showerhead.
  • Chrome finish. Installs with simple household tools making this suitable for a DIY project.
Check Stock

Gas Can Spout Kit QJIUBA for 1/2/5/10 Gal Replacement of Old Tanks Includes Nozzle, Vent caps, Rubber Gasket, Drill bits, Auxiliary Base Cap

  • QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 3 spout kits , 3 spout sealing caps, 3 coarse threaded bases, 3 fine threaded bases, 1 gas can drill , 6 replacement vent caps..
  • The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just needa simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock

25 Pcs Gas Can Spout Kit QJIUBA 4 Sets for 1/2/5/10 Gal Replacement of Old Tanks Includes Nozzle, Vent caps, Rubber Gasket, Drill bits, Auxiliary Base Cap

  • QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 3 spout kits , 3 spout sealing caps, 3 coarse threaded bases, 3 fine threaded bases, 1 gas can drill , 6 replacement vent caps..
  • The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just needa simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock

KP KOOL PRODUCTS Gas Can Spout Replacement with Extension Spout - Gas can Nozzle - Gas can Vent kit & Gasket Filters - Used for Old 5 Gallon Gas can spout - Blitz - Midwest - Scepter and Other Brands

  • ...pout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 4 spout kits , 4 spout sealing caps, 4 coarse threaded bases, 4 fine threaded bases, 1 gas can drill , 8 replacement vent caps. The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage.
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just need a simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
Check Stock

Peerless 2-Handle Centerset Utility Sink Faucet Chrome P299232

  • INSTALLATION: Designed to fit 2-hole or 3-hole centerset configurations. Purchase standard supply lines separately.
  • THREADED SPOUT: The threaded spout of the faucet makes hose attachment easy for accomplishing a wide range of everyday tasks.
  • PURCHASE SUPPLY LINES SEPARATELY: Standard supply lines are required for installation and must be purchased separately to complete the unit.
  • ADA COMPLIANT: This utility sink faucet meets standards set by the ADA (Americans with Disabilities Act).
  • LIFETIME LIMITED WARRANTY: You can install with confidence, knowing Peerless faucets are backed by the Peerless Lifetime Limited Warranty.
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

Danco Pull-Down Diverter Tub Spout for Delta fits 1/2 in. IPS and 1 in. Delta Brass Tub Spout Adapter in Chrome (10953)

  • DELTA PULL-DOWN DIVERTER TUB SPOUT REPLACeMENT: This Danco Pull-Down Diverter Tub Spout is specifically designed to replace your worn-out, leaky Delta diverter tub spout OEM# RP17453 & RP17454.
  • CONNECTION SIZE: This diverter tub spout is compatible with 1/2 inch IPS front connections and will also fit Delta 1 inch brass tub spout adapters OEM# RP 12307 and RP33794.
  • PULL-DOWN DIVERTER INCLUDED: This tub spout includes a discreetly hidden pull-down diverter that is activated by pulling down on the end of the spout, diverting the water from the bathtub to the shower head.
  • TUB SPOUT REACH: The bathtub faucet spout has a 6 inch reach.
  • BATHTUB SPOUT THREADED DIMENSIONS: The bathtub faucet spout metal threads measures 3-3/4 inch to threads from back of tub spout (tub spout end to the start of the internal threads is 3-1/2 inches), IMPORTANT to measure your stub out nipple to ensure it is at least 3-3/4 inches long.
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans, female thread size as shown, please measure your gas cans spout mouth size before purchasing. The new upgraded coarse threaded can spout cap reduces the height of the thread cap to ensure that the cap can be completely sealed..
  • High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coa....
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock

19 pcs Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal ，3 Bendable Tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 Threaded caps ，6 Vent Caps 1 Drill Lid

  • ...de of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage.
  • Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible.
  • The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down..
  • We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit，helping you save your old gas can instead of buying a new one..
Check Stock

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con....
Check Stock

Empire Faucets Double Lever Shower Valve, 1pc - Matte Black RV Bathroom Faucet Valve, Non-Metallic with Vacuum Breaker

  • [Provide Water to Your Bathroom]: The Empire Faucets Sink Faucet Bathroom Spout will uplift the decor and provide a steady stream of water to your RV and camper bathroom.
  • [Easy Installation]: 1-piece construction allows you to insert faucet sink bathroom spout quickly and efficiently.
  • Bathroom water faucet spout features 4 inches (10.2cm) of space between handles.
  • [Sleek and Stylish]: Non-reflective matte black finish provides modern look to any RV or camper bathroom.
  • Faucet bathroom sink tap spout surface will not show fingerprints.
  • Clean with soft cloth, mild soap, and warm water.
  • [Control the Flow]: Solid saber handles allow you to adjust the water to your liking.
  • Washerless cartridge double handle faucet bathroom spout include threaded valve stems to help prevent leakage.
  • [Fits Just Right]: Each handle measures 3.5 inches (8.9cm) long, 2.5 inches (6.4cm) tall.
  • RV bathroom faucet spout measures approximately 5.5 inches (14cm) long.
  • Deckplate measures 6 inches (15.2cm) long.
Check Stock