Categories

Best Three Phase Asynchronism Motor

PRINCE CASTLE Drive Motor Assembly 87-028AS

  • ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
  • 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
  • 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
  • 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Garosa Voltage Monitoring Relay, Overvoltage Undervoltage Monitoring Sequence Protector with LED Lights, 480VAC

  • 【Item Main Purpose】This phase sequence protector is mainly used for various fault detection of 3-phase voltage.not easy to be damaged, can be used for a long time without worry..
  • 【5 Indicators To Indicate】Normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage.We fully guarantee the quality of our products.Please rest assured to buy our items..
  • 【Full-Featured】It integrates three-phase voltage display, over-voltage protection, under-voltage protection, phase-gap protection (phase-break protection), three-phase voltage unbalance protection, phase sequence protection (phase-staggered protection) and acoustooptic alarm..
  • 【Installation Method】The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
  • 【Application Scenarios】This phase sequence protector is widely used in air compressor, motor distribution box, pump, central air conditioning units, power distribution cabinet, crane, etc.Safety using. If you still have any questions, please send us emails, we're available 24 hours..
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control

  • ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
  • Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

SZCY LLC AC 220V/2.2KW Variable Frequency Drive, 12A VFD Inverter Frequency Converter for Spindle Motor Speed Control (Single-Phase Input, 3 Phase Output)

  • Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!.
  • Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume..
  • The machine is screwed to ensure the safety and reliability of the use. Three anti-paint protection lines, improve and extend the life of the fuselage..
  • The operator panel can be moved out and extended by 2M, 1.5M, 1M, 30CM. 1 Year replace or refund!!!.
Check Stock

Nema34 8N.m Closed Loop Stepper Servo Motor 116mm 6A 2 Phase+HSS86 Hybrid Servo Motor Driver Controller 70V/AC 100V/DC CNC Kit for CNC Router Engraving Milling Machine

  • ATO 2 hp (1.5 kW) VFD, single phase 110V/120V input, 1 phase or 3 phase 220v-240v output, designed for driving single/three phase AC motor via 120v power supply.
  • 【Voltage&Frequency】Input voltage: 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】 ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】 Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】 If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

ATO 3 hp 2.2kW 10A VFD, Single Phase 120V Input, 1phase/3phase 220V Output Variable Frequency Drive Motor Control

  • ATO 3 hp (2.2 kW) VFD, single phase 110v/120v input, single phase or three phase 220v output variable frequency drive, specially designed for 120v power supply.
  • 【voltage&frequency】Input voltage : 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】: ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】: If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

Poly Nail Gel Kit with 6W LED Nail Light MYSWEETY 8PCS Nail Extention Gel Nail Enhancement Builder Nail Gel Professional Nail Gel Kit with Top & Base Coat + Slip Solution + Painting Gel + Painting Brushes

  • This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,10A, VFD Dimension: 130 x 103 x 200 mm (L x W x H).....
  • Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other....
  • Due to the VFD product is a flexibly configurable device , you are welcomed to consult with our CS make best choice for your exact application..
  • Simple to operate and wire, convenient for you to use. Warranty: 1 Year replace or refund!.
Check Stock

YWBL-WH Monitoring Relay,JVRD6 Phase Sequence Protection Relay Monitoring Voltage Control Device

  • Function: Three-phase monitoring of phase sequence, phase loss..
  • Application: This monitoring relay is suitable for pumps, fans, blowers, motor elevators, cranes, central air conditioners, etc..
  • Construction and installation: This phase sequence relay uses standard modular construction and rail-mounted mounting..
  • Power supply mode: Powered by the measurement circuit, no additional auxiliary power supply is required..
  • Accessories: With 2 indicators to indicate various working conditions, the two groups usually open/close contacts..
Check Stock

VFD Single to 3 Phase, 4kW 220V AC Single-phase Variable Frequency Drive Inverter, VFD Speed Controller Inverter for 3-phase Motor

  • Output phase: three-phase.VFD Dimension: 100 x 140 x 150 mm (L x W x H)..
  • The phase converter features low noise and low electromagnetic interference, through the optimization of PWM control technology and electromagnetic compatibility of the overall design. There is enough space for heat dissipation between electronic components, and the shell adopts porous heat dissipation..
  • 【Smart Digital Display】 Adopting user-friendly keyboard design & reasonable layout, easy to operate.
  • digital display, intuitive and clear. The detachable design is convenient for remote control..
  • 【Application Motor】CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines..
  • 【Importent Note】 No support external resistor(the function needs to be customized by notifying the seller before purchase),If your motor is heavy load, pls choose a higher power level VFD or contact sales for model selection suggestion..
Check Stock

NEW 5HP 184T 3 PHASE WEG ELECTRIC MOTOR AIR COMPRESSOR 1760 RPM 208-230/460 VAC

  • 5HP 184T Frame 1760 rpm THREE PHASE 208-230/460 volt.
  • COMPRESSOR DUTY AND GENERAL PURPOSE MOTOR.
  • 3-PHASE 1.15 SERVICE FACTOR 1-1/8" SHAFT DIAMETER.
  • REVERSIBLE SHAFT ROTATION - ODP OPEN DRIP PROOF.
Check Stock

Regenerative Blower, 0.37 HP, 42 CFM

  • Performance: Max Flow: 155 CFM Max Pressure: 166 "H20 Max Vacuum: 161 "H20.
  • Specifications: Inlet/Outlet Diameter: 2.00" Voltage/Phase: 220-275/380-480 Three Phase Horsepower: 5.00 Decibels: 74.
  • Direct Drive TEFC - Premium Efficiency, Inverter/Continuous Duty Motor - Anti-Sparking, Corrosion Resistant Aluminum Housing.
  • Extremely low maintenance - Bearing replacement every 40,000 hours of use @ 68?F with no need to relubricate - that’s it!.
  • Regenerative Blowers are far more energy efficient than Air Compressors making them an excellent alternative that could save you thousands on your electricity bill..
Check Stock