ARRISEA Touch Control Box for Kitchen Faucet, Smart Activated Sensor for ARRISEA Kitchen Sink faucets, Not Suit to Other Regular Kitchen faucets

  • 【Three-piece of 30-inch lines---enough to connect your standard deep well sink】:ARRISEA sink faucets use 30 inch Stainless Steel Supply Lines that are 60% stronger than other common hoses. Please don’t worry about paying extra extenders for the long hose. And by a 30-inch insulating hose, you can easily pull-down the sprayer to the Conner you want in the sink..
  • 【Not Plastic Valve--- Solid ceramic valve】: ARRISEA RV kitchen faucet are made of stronger ceramic valves that can be used up to 700,000 times more than normal plastic spool and are guaranteed not to lose or leak, allowing the control valve to be replaced free of the valve over the life of the faucet..
  • 【Four installation step---Save your budget by DIY】: Just need twenty minutes to make your kitchen beautiful according to the simple installation instructions. Note: Please set the gravity ball in the lowest place and separate it to the hot and cold hoses clearly. And please ensure those gaskets in the right joints to avoid the leakproof..
  • 【1.8 GPM High Flow Kitchen Sink Faucet】: If you get the low flow in your pipe, Instantly increases the faucet’s flow by 60% by switching the sprayer mode or blade mode to meet your multiple tasks. The inner PEX hose of rv kitchen faucet that ....
Check Stock

ARRISEA Kitchen faucets with Pull Down Sprayer, Single Handle Stainless Steel Kitchen Sink Faucet with Two Modes Brushed Nickel Upgraded Sprayer and Deck Plate

  • ...ve your budget by DIY】: Just need twenty minutes to make your kitchen beautiful according to the simple installation instructions. Note: Please set the gravity ball in the lowest place and separate it to the hot and cold hoses clearly. And please ensure those gaskets in the right joints to avoid the leakproof..
  • 【Three-piece of 30-inch lines---enough to connect your standard deep well sink】:ARRISEA sink faucets use 30 inch Stainless Steel Supply Lines that are 60% stronger than other common hoses. Please don’t worry about paying extra extenders for the long hose. And by a 30-inch insulating hose, you can easily pull-down the sprayer to the Conner you want in the sink..
  • 【Two step after-sale service---100% satisfied solution】: Whether it's human damage or equipment failure, as soon as the faucet stops working, you will get a new faucet (FOR FREE) within three days by simply contacting customer service with a picture and the description of the problem..
Check Stock

KLS 3-Piece Urethane Cover Golf Ball, 1-Dozen, White

  • The very Best 3 piece Golf Ball for the Money-The Best Value-the Best Golf Ball.
  • Three-Piece Urethane Cover Golf Ball-We will be shipping this in just the sleeves to prevent shipping cost..
  • The Kirkland​ ​Signature​ ​Three-Piece​ ​Urethane​ Cover​ Golf​ Ball Performance+ includes twelve count --12 balls in total., unisex-adult, 1 DOZEN GOLF BALLS, Composite.
Check Stock

Motorized Ball Valve- 1/2 Stainless Steel Electrical Ball Valve with Full Port 9-24V AC/DC and 3 Wire Setup by U.S Solid

  • SAFE AND RELIABLE- The valve body is made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Showerhead Shut Off Valve with Stainless Handle 304 Stainless Steel Mini Ball Valve 1/2 Female X Male NPT Thread Water Flow Control Valve Regulator Chrome Shower Head Flow Control Valve 1

  • FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America..
  • FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc..
  • RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F..
  • DURABLE MATERIAL: This shower head shut off valve made of 304 stainless steel body and ball with much higher performance (high heat-resistance, high corrosion resistance and pressure-resistance), more durable and harder than the ordinary Brass and Plastic one. Stainless steel valve cartridge can be operated up to 250 000 times switching cycles..
  • EASY TO USE: A long stainless handle and on/ off switch with quarter are designed on this shower shut off valve, which made the nozzle easy to turn and control the water flow easily!.
Check Stock

ERGAOBOY 7 Pcs Air Conditioning Refrigerant Angled Compact Ball Valve Connector, 1/4\ ball valve and 5/16\ adapter for mini spilt system,fit for AC HVAC R12 R22 R410A R134A R502

  • Angled Ball Valve: The three color 1/4" male and female ball valve have 45 degree manual shut off valve,800 psi (55 bar) maximum working pressure and 4000 psi (276 bar) minimum burst pressure..
  • R410A Adapter: 1/4" Male to 5/16 " Female R410A refrigerant adapter,It can be easily connected to the accessories of 1/4" female connector in the mini split air-conditioning system..
  • Excellent Quality: Made of high quality soild brass,the 45-degree angle design is more sturdy and durable,the internal o-ring rubber can ensure the good sealing and leaking..
  • Wild Application: 3 pcs 1/4 Inch angle ball valve and 4 pcs 1/4" male to 5/16" female R410A adapter,suit for vehicles and air conditioner issues inspection,addition or recovery of coolant..
  • Quick Installation: Easy to install and connect, can quickly applied to the mini air conditioning system..
Check Stock

Kegco Kegerator, With Kegs, Black

  • ... performance and quiet and energy efficient operation that make it suitable for both commercial and residential applications It has been CSA certified to conform to NSF/ANSI 7.
  • INCLUDES COMPLETE KEG TAPPING KIT The HBK163B-3K comes complete with Kegco's Exclusive Home Brew Dispense Kit and everything you need to tap three Cornelius home brew kegs including a triple faucet stainless draft tower three chrome faucets an empty 5 lb CO2 tank a double gauge CO2 regulator and three complete sets of ball lock keg taps.
  • INCLUDES THREE 5 GALLON BALL LOCK KEGS Made of durable and sanitary 304 grade stainless steel these Cornelius Pepsi kegs have a permanently molded rubber bottom skirt and handles for easy carrying The ball lock fittings can be easily accessed for cleaning and maintenance and the stainless steel lid fastens tightly to the body and includes a pressure release valve.
  • POWERFUL COOLING TECHNOLOGY Intuitive push button controls and a clear LED display make it easy to precisely set the internal temperature between 32 and 75 degrees Fahrenheit low enough to dispense kegged beer or high enough to ferment homebrew Fan-forced cooling helps maintain the optimal refrigerated storage environment and an air-cooled draft tower ensures that every drop of bee....
Check Stock

Eastman 60250 Washing Machine Outlet Box with Center Drain 1/2-inch Crimp PEX, White

  • CONNECTION: 1/2-inch Crimp PEX x 3/4-inch MHT.
  • FEATURES: Includes a pre-installed support bracket, faceplate cover, (1) 1/4-turn hot shut-off ball valve, (1) 1/4-turn cold shut-off ball valve.
  • QUALITY: This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks.
  • DRAIN: Centered through a pre-punched location with 2-inch OD.
  • USAGE: It is designed for recessed residential applications.
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • ...es and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries..
  • CONNECTORS & ADAPTORS - The kit includes 4 x MNPT Plugs, 4 x FNPT Plugs, 2 x FNPT Couplers, 2 x MNPT Swivel Plugs, 1 x MNPT Coupler, 1 x Male Coupling, 1 x Ball Valve, 1 x Tee Brass Fitting, 1 x Thread Seal Tape, 1 x Female Coupling. All packed in a durable clear storage case for easy organization, carrying and storage..
Check Stock