Categories

Best Three jaw Chucks

7-Piece Complete Socket Conversion and Adapter Kit for Ratchet, Extension Bar, Impact Wrench, Impact Driver, Power Drill | Fit All 1/4”, 3/8” and 1/2” Drive Deep and Shallow, Chrome and Impact Sockets

  • Material: chrome vanadium steel. Chrome vanadium steel suitable for heavy duty impact drivers. Spring loaded ball bearings on each square head securely and locks into sockets to avoid slippage during using..
  • This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. The 1/4" hex shank fits all quick change chucks as well as standard drill chucks..
  • Suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert..
  • 8pcs 1/4" 3/8" 1/2" CR-V impact socket adapter Sizes: 4 pieces of 1/4 inch drives, 2 pieces of 3/8 inch drives, 2 pieces of 1/2 inch drives. Compatible with power drills and screwdriver handle tools..
  • Suitable for quick change 1/4" chuck systems or directly into drill chuck. Change your hand socket set into a driven socket set..
Check Stock

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock

Baizongyang Universal Adjustable Double-ended Wrench Multifunctional Bathroom Wrench for Disassembly & Assembly Valves/Faucets/Connecting Pipes/Shower Heads

  • 【Three Size Chucks】The tool set includes three different sizes of chucks, 3.5cm, 4.5cm hexagonal chucks, and multi-functional round chucks. Three sizes of chuck can be installed on the end of the basin wrench, which can be used for different types of sink fittings..
  • 【Ergonomic】The wrench ergonomic short handle design makes you feel comfortable while using it, and the handle has a perfectly sized grip, allowing your hand to hold tightly without slipping, and it is also convenient to use in tight spaces..
  • 【Large Opening Design】The tooth shape and canine tooth design are more suitable for the shape of the sink wrench, with built-in spring, the opening size can be adjusted arbitrarily. The opening range can be adjusted between 56 - 80mm, suitable for a variety of environments requiring wrench operation..
  • 【Durable Material】The bathroom wrench is made of aluminum alloy and ABS. Offers high hardness, impact resistance and durability. With higher precision, higher flexibility and higher efficiency. Comes with a storage box for easy storage and long-term use..
Check Stock

Nova TK-48246 Direct Thread 1 Inch Small Wood Turning Chuck Bundle Set with Automatic Jaw Safety Stop and Copper Impregnated Jaw Slides, Reversible

  • SAFE AND SECURE: Anti-release spindle lock (reversible).
  • Ensures chuck will stay securely mounted on the lathe during forward and reverse turning applications.
  • MINIMIZES LOAD: Small size (85-milimeter/3.35-inch) and weight minimizes load on small spindles and bearings.
  • FAST OPERATING ACTION: Ideal for production turning of smaller pieces.
  • ADVANCED FEATURES: Automatic jaw safety stop, copper impregnated jaw slides, and direct thread 1-inch x 8TPI dual thread.
  • SPECIFICATIONS: Up to 350-millimeter/14-inch diameter bowls (using 50-millimeter jaws).
  • Up to 150-millimeter/6-inch length spigots (using 50-millimeter jaws).
  • Takes the same accessory range as all other NOVA chucks.
Check Stock

LANTRO JS - 4 Jaw Lathe Chuck, Z011A Zinc Alloy Self Centering Lathe Jaw Chuck Clamp Accessory for Mini Metal Lathe Power Lathe Accessories

  • 3" Dovetail Jaw for turning items with a larger foot.
  • Designed for use on Supernova/Supernova2, G3, Midi, Titan, and original Nova chucks.
  • Ideally suited for the Nova G3 and Midi chuck for turning smaller items with a big foot.
  • Pictures shows jaws mounted on chuck for illustrative purposes only - the chuck is not included..
Check Stock

Rockwell RW9275 3/8-inch keyless drill chuck for ¼” Hex Drives

  • This light-duty keyless chuck attaches to ¼” hex drives.
  • Allows screwdrivers with ¼” Hex quick-change chucks to use round-shank drill bits.
  • Traditional 3-jaw design with 3/8 maximum shank capacity.
  • Not suitable for impact drivers or applications involving high torque load.
Check Stock

MK Morse 139038-MKM 050326139038, multi, one size

  • Durable, heavy-duty, carbon steel arbors come complete with pilot drills.
  • Adapt Morse hole saws to any power drill used by professionals.
  • Hex arbors with non-slit jaw slots are positive drive.
  • SDS arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills.
Check Stock

IRWIN SPEEDBOR Drill Bit Set for Wood, 4-Inch, 6-Piece (1877239)

  • Three cutting spurs for faster, cleaner holes, less breakout and extended drilling life.
  • Full screw-point tip allows bit to self-feed for ease of drilling.
  • Shorter overall length for drilling in tight spaces. Ideal for holes up to 2" deep.
  • 1/4" quick-change shank reduces slipping in standard chucks and is compatible with all 1/4" quick-change chucks, including impact drills.
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

3-Pack Keyless Chuck 1/32 to 1/8 Replacement 4486 Drill Keyless Bit Chuck Shank Rotary Tool Quick Change Adapter Kit Compatible for Dremel 4486 Model 395 3000 4000 4300 8220 3000 7300 Multipro

  • Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying.....
  • 3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty....
  • One-piece structure design, alloy material, sturdy and durable, more safer than plastic models. The 3-jaw chuck is well-made, and the built-in spring....
  • This replacement keyless chuck provides a big improvement in precision and holds these tiny bits far more securely and in better alignment with the....
  • Package content: 3 x multipro shank rotary tool accessories keyless chuck..
Check Stock

1/2\ Annular Cutter Round Shank 3/4\ Adapter for Gunsmithing Drilling and Milling Machines to Reduce Barrel OD (Outer Diameter)

  • 1/2” 3-flat to 3/4 Female, for use in 3 Jaw Drill Chucks.
  • Will hold any cutter with a 3/4 inch shank.
  • [Overall Length: 3 inches] [Shaft Length: 1.250 inches] [Shaft Diameter: .375 inches] [Inner Diameter: .752 inches] [Inner Diameter Depth: 1.325].
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock