Categories

Best Throttle Air Bypass Valve

Keihin 016.167 PWK 38mm Air Striker Carburetor

  • The Keihin PWK Air Striker two stroke carburetor is refined to perfection and has set the standard among motocross racing carburetors.
  • PWK Air Striker directs air to main nozzle for improved signal and throttle response.
  • Chromed semi-flat (D) throttle valve for excellent response and more flow at high rpm.
  • Available in two popular sizes to cover all your horsepower requirements.
  • Throttle bores sized to give maximum power and easy jetting with jetting parts available.
Check Stock

GROZ 115V AC Heavy Duty Electric Oil Drum Transfer Pump | Self Priming | 4 GPM Flow Rate | Built-in 2-inch Bung Adaptor (45550)

  • Heavy duty oil pumps designed specifically to transfer bulk oils, hydraulic oils, antifreeze.
  • Air cooled motor with Thermal Overload protection.
  • Non-corroding Aluminum die cast pump body.
  • A high horsepower to flow ratio assures adequate power to pump viscous fluids at low temperatures..
  • Self-priming, positive displacement design.
  • Pump has an internal bypass valve to bypass flow if the discharge pressure exceeds bypass valve setting.
  • Built-in 2” bung adaptor for mounting directly onto drums and tanks.
  • Can be used to transfer used oil also. Just fitting a screen onto the suction tube makes it effective for transferring used oil..
Check Stock

Benefast 06H145710D Turbocharger Diverter Bypass Valve Cutoff Valve For A3 A4 TT VW CC Eos GTI Jetta Passat Tiguan Beetle 2.0L Replacement# 06H 145 710 D

  • ... using an electronic diverter valve (DV) on their turbo TSI/FSI engines for a long time. Diverte valve is meant to release the pressure of the unused turbo power when you lift off the accelerator. It does two crucial things: seal pressure under boost to deliver peak power, and release pressure when you back off the throttle. In turbocharged VWs that are modified for performance, it also does something undesirable: It loses effectiveness, even failing..
  • The valve on your VW regulates the turbo power. When you are at an idle, the vacuum pressure opens the valve. The turbo boost is activated when the valve is fully closed. Lifting the throttle releases the boost pressure into the air cleaner box. If the valve is defective or inadequate, you will get a loss of boost, extended lag or a throttle response that is sluggish, the turbo charger will wear out soon as well. These problems go away with the installation of an aftermarket diverter valve..
  • This Diverter Valve fits for the Following Vehicles: 2006-2011 A3.
Check Stock

Performance Tool W10005 Hi-viz 5-Gallon Horizontal Portable Air Tank With Tire Air Chuck , Yellow

  • PRESSURE GAUGE: Displays air pressure in PSI and MPa.
  • DURABLE AND PORTABLE CONSTRUCTION: Industrial grade air hose with standard tire air chuck.
  • light weight and convenient handle for easy transportation.
  • EASY CONNECT: Connects to standard compressed air source.
  • SAFETY VALVE: Safety pressure bypass valve with manual override.
Check Stock

BIG RED T88011 Torin Portable Horizontal Air Tank with 50' Hose, 11 Gallon Capacity, Red

  • Capacity: 11 Gallon | Dimension: L x W x H 23.6" x 11.8" x 14.6" | Maximum Allowable Working Pressure: 125 Psi.
  • Integrated with safety pressure bypass valve with manual override and air gauge displaying pressure in Psi and Bar.
  • Equiped with 4 feet long industrial grade 1/4 inch male NPT air hose with standard tire chuck.
  • Fitted with Shut-off valve on input allowing tank to be filled and disconnected from compressor without draining itself out.
  • Includes limited 1-year manufacturer warranty.
  • Built-in pressure release valve for safety.
Check Stock

Dual-Head Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Micro Engraer for Jewelry Crafts and Wrought Iron

  • 【Technical Parameter】Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • 【Precise & Adjustable Gauge】The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • 【Ergonomic Design】Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • 【Easy-to-operate Panel】Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • 【Various Application】Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

Michigan Motorsports LS1 TPS and IAC Bolts Throttle Body Position Sensor Idle Air Control 5.3 5.7 6.0

  • Michigan Motorsports LS1 TPS and IAC Bolts.
  • Fits Throttle Position Sensor and Idle Air Control Valve on 1997 and newer LS motors.
  • Contains: 2 Stainless Steel TPS Bolts and Washers 2 Stainless Steel IAC Bolts and Washers.
  • Bolts for Throttle Body Position Sensor Idle Air Control 5.3 5.7 6.0.
Check Stock

VEVOR Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Double-Head Micro Engraver for Jewelry Crafts and Wrought Iron

  • Technical Parameter: Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • Precise & Adjustable Gauge: The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • Ergonomic Design: Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • Easy-to-operate Panel: Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • Various Application: Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

Electronic Throttle Body - Compatible with Chrysler, Jeep & Dodge 2.0L and 2.4L - 200, Sebring, Avenger, Caliber, Journey, Compass and Patriot - Replaces 04891735AC, 977025, 4891735AD - 2007-2017

  • REPLACeMENT ELECTRONIC THROTTLE BODY ASSEMBLY - regulates the proper volume of airflow into the engine which is essential to the mixture of fuel and air in the engine. If you are experiencing engine stalling, failing to start, electronic throttle warning light came on, hesitation or power surging on acceleration on your vehicle then you may have a problem with your vehicle's throttle body..
  • COMPATIBLE REPLACEMENT FOR CHRYSLER, JEEP & DODGE 2.0L, 2.4L VEHICLES - 2011 - 2014 200 2.4L | 2007 - 2010 Sebring 2.4L | 2008 - 2014 Avenger 2.4L | 2007 - 2012 Caliber | 2009 - 2017 Journey 2.4L | 2007 - 2017 Compass 2.0L & 2.4L | 2007 - 2017 Patriot 2.0L & 2.4L. The throttle body on your 200, Caliber or Compass can easily be located inside the engine bay connected at the receiving end of your air intake hose..
  • REPLACES PART# 4891735AC, 4891735AB, 4891735AA, 5429090, 04891735, E100449, 67-7002, S20176, TB1150, 977-025. This replacement electronic throttle body assembly from AA Ignition comes with the new redesigned internal electronic sensor replacing the old one that commonly fails due to excessive wear and tear..
  • OEM FIT, QUALITY, FINISH - This electronic throttle body from AA Ignition is manufactured to the same specifications if not better as the factory th....
Check Stock

T6 Valve Core Remover/Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for HVAC R32 R410A

  • EASY INSTALLATION:Replace Leaking Valve Cores Quickly and Easily,remove and Install Valve Cores Without the Loss of Refrigerant..
  • WORK WITH:Valve core remover installer changer R22, R410a refrigeration air condition services.
  • CONNECTION:Install tool can adapt to R22/R134/R410/R32 air-condition, external bypass port design can remover valve cores. Works great for both Mini split systems as well as 1/4" service valves on split systems..
  • MAIN FEATURES: Ball value handle, metal schrader cap, schrader’s core grabber tool, built-in magnet at the bottom base..
  • PACKAGE INCLUDES: One 1/4" & 5/16" SAE Valve Core remover and install tool..
Check Stock

QPKING Automotive Fuel Injection Systems Cleaning Tools, CFS Series Fuel System Cleaning Assistant Fuel Injector Cleaner 600ML 140PSI

  • Kindly Notice: To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.
  • NOTE:Clean liquid not include,work on gasoline injector only, not for diesel injector.
  • The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • The injector clean kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks (petrol and diesel). Non-Dismantle injector Throttle and fuel system..
  • Throttle model: The way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: 1.Generally speaking, inlet hose is bigger, return hose is samaller.
  • 2.There is always a filter connected in the inlet hose side, and a buffer in the return side.
  • 3.There is arrow on the hose to show the fuel flow direction.
Check Stock

Autool C-100 Automotive Fuel Cleaning Tools CFS Series Fuel System On-vehicle Cleaning Assistant Fuel Injector Cleaner 600ML 140PSI

  • The injector clean kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks. Non-Dismantle injector Throttle and fuel system..
  • The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • NOTE:Clean liquid not include,work on gasoline injector only, not for diesel injector.
  • NOTE: To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.
  • Throttle model: The way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: 1.Generally speaking, inlet hose is bigger, return hose is samaller.
  • 2.There is always a filter connected in the inlet hose side, and a buffer in the return side.
  • 3.There is arrow on the hose to show the fuel flow direction.
Check Stock

Metabo HPT Air Compressor, Wheelbarrow, Honda GX 160 Engine, 8-Gallon, Gas Powered, Portable, Twin Tank, Cast Iron, Oil Lubricated Pump, Solid Flat-free Rubber Tire (EC2610E)

  • ENGINE: Honda GX 160 engine delivers reliable and rugged performance.
  • MULTIPLE NAILERS: 9.5 CFM delivered at 90 PSI operates multiple nailers simultaneously.
  • PUMP: Cast iron, low RPM, oil lubricated pump for improved performance and durability.
  • AIR COOLED: Air-cooled after cooler reduces moisture inside air tanks.
  • REGULATOR: Locking regulator ensures efficient air pressure delivery.
  • PNEUMATIC THROTTLE: Offers more reliability than the standard throttle cable.
  • DISCHARGE HOSE: Stainless steel braided discharge hose resists corrosion and remains flexible.
  • GAUGES: Industrial air pressure gauges easy to read and steel-encased for added protection.
  • TANK: Ball valve tank drains quickly and easily drains air from tanks.
Check Stock