Categories

Best Through Drive Shaft

uxcell Cable Wire Binding Protection Flexible Spiral Tube Wrap Band Black

  • Can also pass through a bearing with an inner diameter of 5mm and use it with other robot parts with matching hexagonal holes, which greatly enhances the load bearing and transmission capacity of the robot parts..
  • High quality stainless steel material, with high hardness, wear resistance and durability, used as a drive shaft accessory for intelligent robots, and also suitable for lathe equipment and engineering equipment..
  • You can use a metal cutting blade to cut the Φ5mm stainless steel hexagonal shaft to your own customized length according to your needs..
  • The Φ5mm stainless steel hexagonal shaft has an outer diameter of 5mm and an appearance of a hex with a plane spacing of 4 mm. It is a perfect combination of a circular shaft with a diameter of 5mm and a hex with a plane spacing of 4 mm. It has the advantages of round shaft and hexagonal shaft..
  • Can be used with other robot parts and accessories with matching hexagonal holes, which can effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the force of the....
Check Stock

Martin JA 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 0.43\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 7/8 Quick Disconnect Bushing, Sintered Steel, Inch, 0.87\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. , RED

  • Rear Drive Shaft Axle Assembly For 2004-2008 Ford F-150 RWD 4.2L 4.6L 144.7 or 144.5 Wheel base, w/10 Bolt Differential Cover.
  • Shaft Length Compressed (in): 90 3/4" | Shaft Diameter (in): 2-7/8 Inch | Measure the Length to Confirm before Order.
  • This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
  • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple.
  • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle.
Check Stock

Martin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SF 1 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 1.44\ Bore, 3.125\ OD, 2.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Accuflex Tantrum 48 INCH World Long Drive +YDS 48" .335 Shaft-R,S,X,2X,3X,4X (Stiff)

  • Accuflex Tantrum 48 Inch World Long Drive Shaft.
  • Tantrum 48 Inch Swedish/Asian/Australian Ld Shaft.
  • Original Limited Edition Accuflex Tantrum 48" World Long Drive Golf Shaft Technology.
  • Best Long Drive Shaft for the $$ - Outperforms them all.
Check Stock

Martin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin E 1 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SH 32MM Quick Disconnect Bushing, Sintered Steel, Metric, 32 mm Bore, 47.52 mm OD, 33.33 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock