Categories

Best Through Hull Fittings

Five Oceans FO1867 White Straight Thru-Hull Fitting Connection for Hose, 1-1/2 inches, Injection Molded Polypropylene, Barbed, Resist Harsh Conditions

  • This Five Oceans Thru-Hull Fitting Connection for Hose is ideal for scupper, sink drain, and bilge pump overboard discharge. Hose Diameter: 1-1/2 inches (38mm).
  • It is made of tough injection molded Polypropylene plastic that will resist sunlight, salt water, oil, gasoline and most common marine chemicals.
  • Nylon plumbing fittings like this cost less than similar fittings made of Marelon or Bronze..
  • Excellent resistance to UV and weather-aging.
  • Thru-Hull Connections For Use With Hose Are Not Recommended For Use Below The Waterline. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Attwood 3876-3 Boat Self-Bailing Cockpit Mounted Scupper Valve Kit

  • Efficiently drains water from self bailing cockpits.
  • Designed to be mounted over existing thru-hull fittings up to 2 inch.
  • Inlcudes retainer ring, screws, rubber flapper valve and gasket..
  • Can be mounted on transom above waterline or as thru-hull cockpit drain.
Check Stock

Aquaterior 5

  • Designed with a non-skid surface allowing horizontal as well as vertical mounting..
  • Material: UV-Resistant ASA Anti-aging Plastic, Anti-ultraviolet..
  • Corrosion free synthetic fittings and durable rubber seals..
  • Dimensions (Inside): 4" (101 mm) - (Outside): 5 5/8" (143 mm).
  • Easy installation with pre-drilled holes. Use silicone sealant on the hull or deck surface when installing the deck plate.
Check Stock

Boating Accessories New SEACHOICE SELF BAILING SCUPPER SCP 18271

  • Efficiently drains water from self bailing cockpits.
  • Designed to be mounted over existing thru-hull fittings with 3/4 inch to 1-1/2 inch openings.
Check Stock

T-h Marine Fms10dp Flow Max Ez Clean Ball Scupper-

  • Efficiently drains water from self bailing cockpits.
  • Designed to be mounted over existing thru-hull fittings with 3/4 inch to 1-1/2 inch openings.
Check Stock

Lifetime Pro Angler 118 Fishing Kayak, Gator Camo

  • Adjustable framed seating System with three settings: high for fishing, low for paddling, and reclining for relaxation.
  • Innovative Combination Tunnel Hull designed to aggressively cut through the water while gradually transitioning into a tunnel hull for tracking performance.
  • 140 in. L x 32 in. W x 12.5 in. H | Weight Capacity: 375 lbs..
  • High initial stability hull allows for stand-up casting.
  • Ready to Fish - Comes with 2 Flambeau Tackle Boxes and 2 Flush Mount Rod Holders.
Check Stock

Fiberglass Boat Hull Cleaner for Boats & Aluminum Boat Cleaner Cleaning Supplies Marine Metal Stain Remover and Restorer Boat Soap Wash Pro Products Clean Deck Pontoon & Sailboat 32oz

  • REMOVES TOUGH STAINS INSTANTLY: Our instant boat hull cleaner effortlessly cuts through buildup on the hull, aluminum pontoons and boat bottom including waterlines, rust, black steak, lime deposits, salt, gas exhaust, grease, grime and hard water..
  • SAFE ON MANY SURFACES: Our fiberglass boat hull cleaner for boats is also safe for an aluminum hull, gelcoat, metal and painted surfaces - unlike other fiberglass cleaners or gel coat boat wash. Turn yellowed boat surfaces bright white instantly!.
  • FAST RESULTS: Our pro boat stain cleaner quickly and easily removes tough new and old stains and heavy build up in minutes, making boat hull cleaning a breeze. Watch as the stains melt off your boat, sailboat, bilge, deck or even vinyl siding..
  • EASY APPLICATION: This versatile marine grade boat cleaner can be applied using a sponge or sprayer. Simply apply the hull boat clean solution & restorer on your stained area, allow to sit for 2 minutes, and rinse off to see your clean restoration..
  • WHY BETTER BOAT: We're a family owned American business committed to making premium quality boat cleaning supplies & boat cleaner products and kit. We stand behind your satisfaction and our sealant, seat cleaner, protectant hull & boat soap..
Check Stock

Trailer Bunk Glides (3' x 48') kit of 4

  • Fiberglass and aluminum boats, PWC and pontoons easily glide on and off Surfix Trailer Glides..
  • Solid High Density Polyethene ½” thick glides provide full bunk support.
  • no more uneven spaced pads to leave marks on the hull. No thin skin to break down and expose a cost saving Injection molded honey comb or understructure to grind against the hull..
  • Low profile stainless steel wide pan head screws embrace the flat deep mounting pockets. No counter sunk screws to spread the plastic and work them loose or through the material..
  • Quarter-rounded top perimeter and square base provides snug butting and a no-snag transition between glides. Start the glides at the rear most edge of the bunk the quarter-rounded top will be the first contact to slide on the hull.
  • The bright white color allows you to easily see and wash off any sand or road dirt that can scratch your hull. Sold as a kit of 4 glides.
Check Stock

Rule 405FC Livewell / Baitwell Pump, Tournament Series, Removable Motor Cartridge, 1100 GPH, 12 Volt

  • For thru-hull applications, tapered 3/4" NPT pickup tube.
  • Powerful and long lasting, outstanding performance as well as the versatility of replacing the motor cartridge if the motor expires.
  • Cartridge feature also allows easy access to impeller for cleaning and maintenance.
  • Replacing the motor cartridge only allows the fittings and hose to remain totally intact.
Check Stock

Rule 14A 3700 GPH Heavy Duty Bilge Pump Non-Automatic 12 Volt White/Red

  • For thru-hull applications, tapered 3/4" NPT pickup tube.
  • Powerful and long lasting, outstanding performance as well as the versatility of replacing the motor cartridge if the motor expires.
  • Cartridge feature also allows easy access to impeller for cleaning and maintenance.
  • Replacing the motor cartridge only allows the fittings and hose to remain totally intact.
Check Stock

Trailer Bunk Glides (Kit of 2 Glides) (3' x 60')

  • Fiberglass and aluminum boats, PWC and pontoons easily glide on and off Surfix Trailer Glides..
  • Kit of 4 ( less than 60" ) kit of 2 ( 60 " or longer ) Solid High Density Polyethene .45” thick glides provide full bunk support.
  • no more uneven spaced pads to leave marks on the hull. No thin skin to break down and expose a cost saving Injection molded honey comb or understructure to grind against the hull..
  • Low profile stainless steel wide pan head screws embrace the flat deep mounting pockets. No counter sunk screws to spread the plastic and work them loose or through the material..
  • Quarter-rounded top perimeter and square base provides snug butting and a no-snag transition between glides. Start the glides at the rear most edge of the bunk the quarter-rounded top will be the first contact to slide on the hull.
  • The bright white color allows you to easily see and wash off any sand or road dirt that can scratch your hull. Sold as a kit of 4 glides ( less than 60 Inches ) or a kit of 2 ( 60 inches or longer ).
Check Stock

Trailer Bunk Glides 3" x 84" kit of 2

  • Fiberglass and aluminum boats, PWC and pontoons easily glide on and off Surfix Trailer Glides..
  • Kit of 4 ( less than 60" ) kit of 2 ( 60 " or longer ) Solid High Density Polyethene .45” thick glides provide full bunk support.
  • no more uneven spaced pads to leave marks on the hull. No thin skin to break down and expose a cost saving Injection molded honey comb or understructure to grind against the hull..
  • Low profile stainless steel wide pan head screws embrace the flat deep mounting pockets. No counter sunk screws to spread the plastic and work them loose or through the material..
  • Quarter-rounded top perimeter and square base provides snug butting and a no-snag transition between glides. Start the glides at the rear most edge of the bunk the quarter-rounded top will be the first contact to slide on the hull.
  • The bright white color allows you to easily see and wash off any sand or road dirt that can scratch your hull. Sold as a kit of 4 glides ( less than 60 Inches ) or a kit of 2 ( 60 inches or longer ).
Check Stock

Rule 403FC Livewell / Baitwell Pump, Tournament Series, Removable Motor Cartridge, 800 GPH, 12 Volt,White/Red

  • For thru-hull applications, tapered 3/4" NPT pickup tube.
  • Powerful and long lasting, outstanding performance as well as the versatility of replacing the motor cartridge if the motor expires.
  • Cartridge feature also allows easy access to impeller for cleaning and maintenance.
  • Replacing the motor cartridge only allows the fittings and hose to remain totally intact.
Check Stock