Categories

Best Through hole Led Light

Kohree New LED Submersible Trailer Tail Light Kit, 12V LED Utility Trailer Lights DOT Approval, Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer

  • ...ible. Also, it can effectively resist damage of sand, dust, dirt, snow and other horrible weather..
  • SURFACE MOUNT: With diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree 12V led trailer lights protect LEDs from shock and vibration better than through-hole technology. Simply to use..
  • DOT APPROVAL: Kohree hola boat trailer light kit gives your truck a distinctive look and completely street legal, perfect replacement low profile trailer lights for under 80 Inch width towing vehicle, like boat trailer, RV, camper, tractors, canoes, truck, trailer, bus, Lorry, Van, caravan, snowmobile etc..
  • FULL SERVICE TRAILER LIGHTS KIT: This utility led trailer light kit has everything you need: 1X Rectangle LED combination stop turn tail light(37 Diodes),1X Rectangle LED combination stop turn tail light with license illuminator(48 Diodes), 2X amber LED marker lights ,25-ft wiring harness(21.65ft wiring harness and 3.93ft wiring harness),license plate bracket and mounting hardware..
Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light.
  • Dimensions: 8.5" x 6" x 1", 7.6" for horizontal hole distance.
  • These 12V DC 8 inch Oval trailer lights are universal for rv, motorhome, camper, Trucks, trailers, tractors, semi trailer, horse trailer, travel trailer, dump Truck, special vehicle etc. Anywhere you'd like as well as the size fit.
  • Warranty: We truly offer 1 year warranty for these 8.5 inch oval led trailer tail lights! If you have any questions or issues about our partsam oval led lights, Please feel free to us and we will reply in 24 hours.
Check Stock

OhLectric Recessed LED Light Plate - Slim Light Kit Bracket - New Construction Light Mounting Plate with Notches - Steel, Pack of 6 (26\ Rough-in Plate for 6\ Recessed LED) - OL-48065

  • RECESSED PLATE SET: Made from top quality galvanised steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want..
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need..
  • MODERN FEATURES: The galvanised steel used in the making of the plates make it lightweight and less likely for rust formation. Use these plates for planning your lighting layout prior to hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted..
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots..
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from resid....
Check Stock

Nilight - TL-32 2PCS 3.9Inch 3 LED Truck Trailer Red Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Rock Light Waterproof Sealed Surface Mounted

  • featured functions: used as led marker light at front rear side roof top or led clearance light indicator light on any 12v pickups truck trailers suv rv van caravan camper boat lorry bus etc..
  • upgraded leds: use 3 quality piranha led, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent red light..
  • awesome reflector design: the marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance..
  • highly sealed: lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. be ready for all weather abuse..
  • simple installation: black wire for ground, red wire for positive. just fix the black base with the 2 flat head screws provided, and then snap the light into the base. to run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole..
Check Stock

Nilight - TL-33 4PCS 3.9 Inch 3 Led Truck Trailer Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Waterproof Sealed Surface Mounted LED Marker Light

  • featured functions: used as led marker light at front rear side roof top or led clearance light indicator light on any 12v pickups truck trailers suv rv van caravan camper boat lorry bus etc..
  • upgraded leds: use 3 quality piranha led, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber or red light..
  • awesome reflector design: the marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance..
  • highly sealed: lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. be ready for all weather abuse..
  • simple installation: black wire for ground, red wire for positive. just fix the black base with the flat head screws provided, and then snap the light into the base. to run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole..
Check Stock

OHLECTRIC New Construction Rough-in Plate for Led Downlight - Slim Steel Plate/Bracket - Use As A Guide for Drywaller to Install LED Fixture - Used with 6\ Model - Pack of 48 - OL-31359

  • RECESSED PLATE SET: Made from top-quality galvanized steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want.
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough-in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need.
  • MODERN FEATURES: The galvanized steel used in the making of the plates makes it lightweight and less likely for rust formation. Use these plates for planning your lighting layout before hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted.
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots.
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from residentia....
Check Stock

Nilight 10PCS 3.8 Inch 6 LED Red Side Marker Light Indicator Light Rear side Marker Light for Truck Trailer RV Cab Boat Bus Lorry LED Marker Light Clearance Light, 2 Years Warranty (TL-15)

  • Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker light.
  • Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, Our back wire lead is added proper glue to make it completely seal without affecting the surface mount.
  • 3 steps of light mounting: Mark and drill holes according to the foam tape base provided.
  • Peel and stick the foam tape to the light.
  • Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if used some washer under the foam tape base when fixing the two sides.
  • Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as LED marker light clearance light indicator Light.
  • Package Includes: 10 Pack of red side marker light, include a hardware pack and foam tape base.
Check Stock

VIPMOON Bluetooth LED Light Strip Dimmer, 5-24V DC 30A PWM Dimming Controller with Microphone for 5050 3528 5630 Single Color Dimmer Switch LED Light

  • ...ubes with sufficient power.This dimmer switches for led lights is smarter and more durable than regular dimmers.It supports PWM digital dimming function to effectively avoid inrush current and protect your LED lights and your safety..
  • 12v led controller bluetooth: You can adjust the brightness in the range of 0-100% through the intelligent control of Bluetooth application. This dimmer switch led light can help you make the light soft and stable without flickering, making your eyes more comfortable..
  • 12V LED dimmer performance:led strip dimmer switch the maximum rated current is 30A,that is,360W@12V and 720W@24V.
  • the power supply voltage must correspond to the voltage of the dimming controller and the light strip.screw-in input and output terminals and pre-drilled mounting holes make installation a breeze..
  • Flexible use:12v light dimmer controller compatible with DC 5V-24V 30A LED light application, single channel dimming controller for monochrome 5050 3528 5630 LED strips.mainly used to adjust LED monochromatic light bulbs and LED monochromatic light strips..
Check Stock

Nilight - TL-13 10 PCS Amber Red 3.8” 6 LED Amber Side Marker Light Indicator Light Rear side Marker Light for Truck Trailer RV Cab Boat Bus Lorry LED Marker Light Clearance Light, 2 Years Warranty.

  • Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker light.
  • Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire lead is added proper glue to make it completely seal without affecting the surface mount.
  • Simple Installation: 2 wire connection, yellow/red for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided.
  • Peel and stick the foam tape to the light.
  • Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.
  • Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as led marker light clearance light indicator Light.
  • Package Include: 5 pack of amber + 5 pack of red side marker light, include a hardware pack and foam tape base.
Check Stock

12V Magnetic Towing Trailer Light Kit Amber/Red

  • Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
  • Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse.
  • Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light.
  • Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
  • Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack.
Check Stock

Nadair, 4’’ LED Recessed Gimbal (Swivel) Ultra Slim Lights, NO Part of Ceiling Visible Through The Eyeball Gap, 1-Pack, IC and Non-IC, Dimmable, 8W=50W, 600 Lumens, 3000K (Warm White), Quick Connect

  • ULTRA SLIM LIGHTS: For an easy installation in tight spaces requiring 1'' clearance..
  • TRADITIONAL LIGHT LOOK / SLIM DESIGN: Traditional light bulb look and 40 degrees beam angle = same as traditional GU10 or PAR20 light bulbs.
  • PROTECTIVE BACK COVER: Prevents ceiling from showing through the eyeball gap and prevents insulation wool from falling and being visible through the light..
  • 1-pack, 4" LED Gimbal Slim Panel Light Kit - 600 Lumens, 8 Watts LED ( Equivalent to 50W Halogen), Saving 85% on your electricity bill.
  • DIMMABLE - Our light Fixtures works perfectly with a wide range of dimmers allowing you to save energy and increase light bulb life span.
  • INSTALLS EVERYWHERe - INDOOR: Including in Showers (For Damp locations) - OUTDOOR: Including in soffits - (For Damp locations).
  • AIRTIGHT: Prevents air in your home from leaking through the light. Energy saver.
Check Stock

Partsam Rectangle 14x Amber/Red 4" Truck Boat Trailer Side Marker Indicator lights 8-LED Surface Mount

  • Package includes 14 Pieces (7Red+7Amber) Universal 4 Inch Led Side Marker Indicator Lights. NOTE: This marker lights set includes standard nut and bolt for anchoring, not self tapping screws(bot specs: 0.3cm diameter and 2.6CM long). You may need to drill new mounting holes all the way through, then use the bolt and nut to install.
  • 7 Pieces Red Led Marker Lights and 7 Pieces Amber Led Marker Lights.
  • Light Size: 4" x 1.6" x 0.7" and Mounting holes spacing: 3.15in. approx.,operates form 9-16Volts.
  • Each Clearance Light is built in 8 LEDs miro reflectors, provide you super night visability on the road.
  • HARDWIRED WITH TWO WIRES: BLACK IS GROUND, YELLOW IS POSITIVE.
  • This Rectangle led trailer light is surface mount and you can mount anywhere as long as the size fit.
  • Usage: side marker lights, roof lights, corner lights, rear lights, identification lights fender lights,cab lights, clearance lights etc. Note: this led marker lights only come with one positive wire, one functions at a time. If you use it as the front turn signal lights, it may not be that bright, thanks.
  • Application: Works on any 12V DC vehicles. Perfectly suitable for all kinds of trucks, Trailer, Semi-trailer, Lorry, Off-road vehicle, ATV, SUV, UTE, Pickup, Tractor, Bus, Car, Boat, Car....
Check Stock

Nilight 2PCS 3Inch 42W LED Cubes Upgraded Spot Flood Combo Beam Square LED Pod Light Driving Fog Light for Offroad Pickup Trucks Jeep ATV UTV SUV, 2 Years Warranty (14025C-B)

  • Upgraded Brightness: Each light comes with more led quantity, and led chips rank in 3 rows, giving the light a brighter light output and larger irradiation coverage than the classic LED cubes.
  • Upgraded Combo Beam Type: Combining top and bottom 30°spot light and middle 170° flood light, the lard cubes can greatly improve your visibility at broader and further distance, no more afraid of dark spot.
  • High Efficient Performance & Durable: Featured IP67 waterproof rate, powerful to withstand harsh environment and weather. All in aluminum profile and thick enough heat sinks housing, helps it speed up the heat dissipation and makes it durable and long lasting.
  • Easy Installation: Just follow picture 6, firstly attaches bracket, mounting nuts between heat sinks.
  • and then bolt through hole, bracket and nut and tight with an Allen key, lastly mount light on the position.
  • Wide Application: Fit for any 9-30V vehicles and can be generally used on multiple locations, OEM fog light holes, front bumper, bull bar, hood, A-pillar, roof, rear bumpers ect. Work perfectly as fog lamps, driving lights, headlights, backup lights ect.
Check Stock