Categories

Best Thrust Flinger

MRC R4AFF Small Ball Bearing, Double Shielded, No Snap Ring, Inch, 1/4\ ID, 3/4\ OD, 27000 rpm Max RPM, 261 pounds Static Load Capacity, 632 pounds Dynamic Load Capacity

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

3575169 Turbocharger Rebuild kit for Holset HX35 HX35W HY35 HX40 HE351 HE351CW

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fit for Holset HX35 HX35W HY35 HX40 HE341 HE351 & HE351CW turbochargers.
  • ★Improved thrust bearing with large diameter oil feed holes.
  • Complete gasket set included. including 28 quality components.
  • ★Commons Vehicles With This Turbo: for Dodge Ram Cummins Turbo Deisel.
  • ★This kit includes: Machined from Copper Bar Upgraded Thrust Bearing 2 Journal Bearings 4 C-Clips to Hold in the Bearings 1 Thrust Collar 1 Thrust....
Check Stock

OIIKI 4 Pack Weed Trimmer Head Adapter, Attachment Washer Plate Maintenance Kit, Lawnmower Blade Adapter forTrimmer Brush Cutter Blade

  • UNIVERSAL TRIMMER HEAD ADAPTER: It's specially designed to attach different types of blades to string trimmer.It fits most model which are straight-shaft trimmers..
  • GARDENING MACHINE LAWNMOWER KIT SIZE: Rider plate diameter: 80 mm/ 3.15 inch, Collar Nut Diameter: 25 mm / 0.98 inch, Thrust Washer diameter: 42 mm/ 1.65 inch.
  • FIT FOR most of Brush cutter, is a universal and practical replacement accessory..
  • REPLACEMENT PARTS: Thrust washer:4130-713-1600.
  • Collar nut:4126-642-7600.Perfect match for the original one. Easy installation, stable characteristics, high reliability..
  • PACKAGE INCLUDE : 1x Rider plate, 1x Thrust plate Guard washer, 1x Collar nut, 1x Thrust washer..
Check Stock

Oceanic Viper 2 FF (Blue, LG(10.5-11.5))

  • Ideal for all diving and snorkeling skill levels.
  • Flexible Power Thrust Channel directs water off the tip of the blade for improved power and efficiency.
  • Power Vents reduce stress while accelerating water over the blade. Oversized blade produces increased thrust and propulsion..
  • Extremely lightweight for increased performance and ease of travel.
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Enduro ABEC-5 Angular Contact Bearing, 71903 17X30X7-71903 LLB

  • Single-row angular contact ball bearing, supporting moderate to heavy one-directional thrust loads, and combined loads where thrust load is predominant.
  • Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Open configuration for lubrication applied in place.
  • Brass cage evenly spaces balls for reduced friction, vibration, and noise.
  • ABEC 1 tolerance ratings for accuracy and low rotational speeds.
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

4pcs EMAX RS2205 2300KV Brushless Motor 2CW 2CCW for QAV250 QAV300 FPV Racing Drones Multirotor Quadcopter

  • Update Version:Compared to the RS2205, maintain the RS2205 2600KV Brushless Motor's advantage, and 2 grams lighter than the first version of the RS2205,and the new RS225-S cranks out another +100g of thrust..
  • High Quality Guarantee:The new standard of EMAX RS2205-S 2600KV Brushless Motor is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational response, higher thrust..
  • Strong Thrust Power: Produces over +1,000g of thrust using 4S and GF5045BN, is more stronger than other ordinary 2205 brushless motor..
  • Support Your Racing Drone:This 2205S 2600KV brushless motor is perfect for your 210 220 250 280 FPV racing drone quadcopter, and suitable for 5 inch propellers like 5030 5035 5045 props.
  • Size and Design:This have a weight Approx 30g with a normal size-0.87*0.2 inch. 2205-S 2600KV Brushless Motor is no difference between CW and CCW..
Check Stock

Thrustmaster TCA Quadrant Airbus Edition (Quadrant, T.A.R.G.E.T Software, PC)

  • Inspired by the world of civil aviation, for multiple possibilities Thrust reverser function for total realism when piloting commercial airliners and civil aircraft.
  • Thrust levers can be adapted to any style of aviation, thanks to mechanical selectors that let you disable the detents.
  • Tensioning screw (accessible via the underside of the throttle quadrant): adjust the resistance according to your preferences.
  • Incredible upgradability Throttle quadrant includes connectors for upcoming add-ons in the Thrustmaster TCA ecosystem (sold separately).
  • Two throttle quadrants can be linked together (additional throttle quadrant sold separately), giving you access to four thrust levers instead of two!.
Check Stock

Newborn 250 Super Smooth Rod Revolving Frame Caulking Gun, 1/10-Gallon Cartridge Capacity, 18:1 Thrust Ratio

  • Steel revolving frame caulking gun for 1/10-gal. cartridges.
  • Thrust ratio of 18:1 for use with acrylic, adhesives, asphalt, butyl, and cement.
  • Revolving frame allows cartridge to rotate for maintaining bead orientation when caulking around corners.
  • Smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod.
  • Zinc alloy handle and trigger for corrosion resistance.
  • Professional-grade high-thrust ratio caulk gun.
Check Stock

Mardatt 24 pcs 3 Type Thrust Needle Roller Bearings with Washers, AXK3552, AXK2035, AXK2542 Chromium Steel Rollers for Automobiles, Pump, Machine Tools

  • 【3 Size Thrust Needle Roller Bearing Assortment】You will get 9 pcs 20*35*2MM thrust needle roller bearings with washers, 9 pcs 25*42*2MM thrust needle roller bearings with washers, 6 pcs 35*52*2MMthrust needle roller bearings with washers, totally 24 pcs..
  • 【Premium Material】Made of chromium steel featured with a nice load carrying capacity and stiffness, high hardness, and high precision, smooth surface no residual burr that smooth to touch. Heat treatment process makes the bearing ball stronger, avoiding to deformed for a long time..
  • 【Feature】Needle Roller Thrust Bearings can accommodate axial loads in one direction only. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Huge Function】Designed for low speed operation and axial loads only. Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise..
  • 【Wide Application】 Combined with 2 washers, make objects rotating smooth! Perfect for oven turntable, pump, rotating applications, motors, bikes, air conditioning, machine tools, automobiles, ect..
Check Stock