Best Thumb Nuts

Fasten Tight Black Nylon - 10-24 Knurled Thumb Nuts 25pack

• ThumbNuts are easily removed, Easier more compatible than Wing Nuts.
• Inlcudes 25 - Black Nylon Plastic Thumb Nuts fit 10-24 Imperial thread Carriage Bolts.
• Black Nylon66 suitable where non-conductivity, corrosion resistance, and cost are important considerations.
• Tools not necessary for tightening or loosening, Ensure a lasting hold for any project.
• Fit the standard bolts on pet carrier cages and kennels.

AIR LOCKER CN25AL 14 Gauge Concrete T-Nails for Concrete Nailers 2-1/2 Inch Smooth Shank (2 Packs of 1000)

• Replacement Frame Nail Gun Donut Flush Nailer Part.
• Compatible With: Hitachi FN83A NR83A NR83A2 NR83A2 NR83A2(S) FR350A.
• Includes a wrench, two wing nuts and donut flush nailer.
• It can be connected to the nail head by fixing screws or thumb wing nuts. Fixing screws or wing nuts for easy installation.

Ramset Powder Fastening Systems SA270 Tool Kit

• [Powerful rivet nut adapter kit] With a hexagonal thumb conductor, the adapter can be used with standard wireless drills and screwdrivers to transform into powerful nut rivet pliers. For aluminum and steel rivet nuts, use wireless drills of 12V or more, and for stainless steel nuts over 1/4 use wireless drills of 14.4V or more (All drills must be equipped with a torque limiter clutch)..
• [Interchangeable 10Pcs and Nut 50Pcs] Electric Kit Adapter, the rivet nut kit comes with 10 interchangeable chucks (M3, M4, M5, M6, M8, M10, 8-32, 10-24, 10-32, and 1/4-20). Each size chuck is equipped with 5 nuts to meet your various riveting operations..
• [Comfortable and Sustainable] The Electric Drill Adapter kit comes with a sturdy carry case for easy protection and storage of electrical drills, nuts, and rivets, and is very easy to transport. The high-quality aluminum-covered handles are non-slip and provide comfort..
• [Easy to Transport and Versatile] The Electric Drill Cover Adapter kit comes with a sturdy carry case for easy protection and storage of electrical drills, nuts, and rivets, making it easy to carry. They are suitable for installation and maintenance in buildings, cars, elevators, instruments, and furniture. DIY and hand are a good choice..

MroMax Knurled Thumb Nuts, M6 Through Hole Round Knobs ，Whitewash 304 Stainless Steel, Pack of 6

• ✅【DIMENSION】- Threaded Size: M6 x 1.
• ✅【MATERIAL】- These Thumb Nuts made of 304 stainless steel ,rustproof and durable to use..
• ✅【ADVANTAGE】- To open and close the air box cover without tools.This facilitates tightening by hand, commonly used in electronics applications..
• ✅【Feature】- Common on 3d printer beds, machine tools, cabinets, tool boxes, and great for maker projects and things that need adjusted quickly. Works with bolts, studs and screws..
• ✅【PACKAGE CONTENT】- 6 x M6 Knurled Nuts.

MroMax Knurled Thumb Nuts, M8 Through Hole Round Knobs ，Whitewash 304 Stainless Steel, Pack of 5

• ✅【DIMENSION】- Threaded Size: M8 x 1.25.
• ✅【MATERIAL】- These Thumb Nuts made of 304 stainless steel ,rustproof and durable to use..
• ✅【ADVANTAGE】- To open and close the air box cover without tools.This facilitates tightening by hand, commonly used in electronics applications..
• ✅【Feature】- Common on 3d printer beds, machine tools, cabinets, tool boxes, and great for maker projects and things that need adjusted quickly. Works with bolts, studs and screws..
• ✅【PACKAGE CONTENT】- 5 x M8 Knurled Nuts.

Black Walnut Bread Lame - Made in the USA!

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

• ...c standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
• Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
• Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
• Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
• 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and durable, Highest quality hardware..

B&P Lamp® 4 Inch Fitter Wired Flush Mount Ceiling Fixture (White)

• Flush Mount Pre-Wired Fixture Holder, U.L. listed..
• 4 inch shade fitter, 5 inch diameter on ceiling side.
• Comes with crossbar, wire nuts, thumb screws, and high head porcelain socket.
• Excellent canopy for hallways, closets, bathrooms, utility rooms, garages and more!.

B&P Lamp 4 Inch Fitter Wired Flush Mount Ceiling Fixture (Silver)

• Excellent canopy for hallways, closets, bathrooms, utility rooms, garages and more!.
• Comes with crossbar, wire nuts, thumb screws, and high head porcelain socket.
• 4 inch shade fitter, 5 inch diameter on ceiling side.
• Flush Mount Pre-Wired Fixture Holder, U.L. listed..

T1TYN [Explicit]

• PREMIUM QUALITY: Premium hand crafted wood handle with best quality Stainless Steel Thumb-nuts and Screws..
• CUSTOM CRAFTSMANSHIP: Each lame is beautifully handmade with a more comfortable and ergonomic handle to achieve a professional scoring every time..
• REPLACEABLE BLADES: Blades are easy to replace with standard razor blades (6 included)..
• STYLISH STORAGE: Includes hand-made, authentic protective leather sleeve to safely store lame when done using..
• SATISFACTION GUARANTEE: We guarantee the bread lame will perform exceedingly well and enable you to bake beautiful breads. If you feel it fell short....

Z&C Bakery Premium Bread Lame - Made in the USA with 6 Replacement Blades Including Leather Protective Case

RLECS 10pcs M6 Knurled Thumb Nuts with Collar 3D Printers Parts, Nickel Plating, 1mm Pitch

• Product name: Knurled Thumb Nuts with Collar.
• Fit Bolt Size(Thread Diameter * Pitch): M6*1.0mm.
• Please refer to the picture for more size infomation..
• Advantage: This facilitates tightening by hand, commonly used in electronics applications..
• Common on 3d printer beds, machine tools, cabinets, tool boxes and so on..

Finger Training Tool, Finger Multifunctional Hands Adjustable Finger Wrist Golf Strength Trainers Support Device, Wrist Finger For Strength Trainers Dynamic Orthotic Exerciser

• 【EASY TO CLEAN】Removable cloth cover, easy to clean, light weight, suitable for carrying out, and will not be overworked for a long time. In patients with hemiplegic dysfunction, wrist and fingers and wrists, to exercise, to improve muscle strength and to increase the associated parts of the common range of motion..
• 【ADJUSTABLE】Has very good elasticity, can exercise the flexibility of the finger well, and promote the recovery of the finger joint. Use removable stainless steel nuts to adjust the strength and size of the pointer. Adjust finger height to fit finger size..
• 【HIGH QUALITY MATERIAL】It adopts aluminum alloy frame with high quality spring, sponge cloth pad and breathable curved plastic plate. The quality is firm and comfortable to use..
• 【SPECIALLY DESIGNED】For finger rehabilitation, functional exercise of the long thumb of the thumb, prevention and correction of contracture stiffness, wrist extensors and tendons (called lateral palsy)..
• 【SUITABLE FOR】Applicable to people with finger movement dysfunction, finger and wrist weakness, wrist sprain, and sports injuries. Can be used for any adult, regardless of the right hand..