Categories

Best Thumb Tip Flame

Bernzomatic Torch Butane 5.5 Oz

  • Electric ignition, flame lock and flame adjust to fine tune the tip temperature for various uses.
  • Three interchangeable tips: soldering tip, hot air blower and micro torch with pinpoint flame.
Check Stock

SUMAG Red Light Up Thumb Tips - Finger Magic Tricks - 2 Pairs Fake Finger with LED Light Magic for Magician

  • 100% Brand new and high quality magic fake thumb tip.
  • The fake thumb tip is suitable for most people's thumb or finger.
  • Great fun for party and entertainment magic trick.
  • Finger magic tricks is easy to do for beginners.
Check Stock

The Binding Tool

  • ...sable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip hydration process..
Check Stock

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

  • ...it is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
  • To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
  • After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
  • Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
  • BUILT TO LAST: Constructed of heavy-duty metal parts, this welding torch set is ideal for first-time metal workers.
  • This brazing kit is designed with copper tips and brass fittings for strength, durability, longevity, and precision.
  • The plastic blow molded case provides safe storage for this porta....
Check Stock

FastCap Long Nosed Pattern Marker, Gold

  • ...sable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip hydration process..
Check Stock

Flicker Flame Light Bulb Flame Tip Halloween Chandelier Flickering Light Bulbs Christmas Replacement Orange Glow Bulbs Crystal Clear Candle Bulb for E26 Standard Base Pack of 6

  • 【Flicker Flame Replacement candle Bulbs】warm flickering flame Candelabra bulbs,different quantity sets of flicker flame light bulbs, sufficient quantity to meet your various decoration needs for festivals, gatherings or daily life, please refer to pictures for checking more quantity information.
  • 【Energy-saving】The power of this flickering light bulb ，low wattage saves energy and helps create warm ambiance with not too bright light great for Halloween Thanksgiving party decoration..
  • 【Like a Real Candle Flame 】The flame tip replacement bulbs are designed into flame tip shape, which can create a realistic flickering flame effect, soft orange glow flickers up and down the flame shaped filament, and creates a great ambiance Halloween decorative bulb, warm flame colors decorate your space and give you a quiet, romantic and relaxing moment..
  • 【Create Unique Thanksgiving Ambience】The Fall Thanksgiving candelabra replacement light bulb is great for electric candle lights and electric window candle lights. It is a romantic Atmosphere lighting decoration for party, wedding, bathroom, Halloween, Thanksgiving, Christmas....
Check Stock

Blazer 189-8021P Big Buddy Turbo Torch Blue

  • Angled head design and slim body shape, for ease of use and portability.
  • Air flow control switch, mounted at top of unit, for an easy change of flame precision and temperature.
  • Torch flame, adjustable from yellow to blue flame, for flame precision flexibility.
  • Piezoelectric ignition system, requires no electrical connection.
  • Maximum 2,500-degree F, blue-torch flame for a more precise flame tip~.
Check Stock

K23 MC-Welding & Brazing Outfit

  • Kit includes HA-3i and HA-11i Inferno brazing tips.
  • and 3/16-inches by 12-feet A x A red hose.
  • Durable, long-life design crafted from strong 304 stainless steel tube stock and designed to stand up in the field.
  • Quality, precision manufacturing for consistent production and each tip is tested to ensure a perfect orifice and again to ensure flame quality.
  • Hottest tip, everytime based on exacting standards to eliminate irregular heating, "horns" and other inconsistencies.
  • Proof positive - the perfect flame - the tips are configured to produce reliable and repeatable flame performance and are evaluated using thermal photography techniques.
Check Stock

Dixon Industrial REACH- Deep Hole Mechanical Pencil with Lead Refills included, Yellow (14301)

  • ...sable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip hydration process..
Check Stock

Capri Tools Multi-Angle Butane Soldering Iron Kit

  • Multi-angle, multi-function butane soldering iron with interchangeable tips lets you take care of soldering, cutting, shaping, and more with a single tool.
  • 6 interchangeable tips for soldering and cutting (soldering tip, sharp knife, anvil tip, chisel tip, needle tip, hot knife), and 1 deflector attachment for shaping.
  • Transform the tool easily into a hot blower or an open flame micro butane torch for a wide variety of heating, shaping, and material removing applications.
  • Multi-angle positions at 5°, 45°, and 90° adjustable with a simple press of a button, 4 flame intensity settings, safety ignition lock, and a magnetic handsfree base stand.
  • Transparent fuel window lets you see when the fuel tank is filled and when it's near empty. Refill with butane gas designed for lighters and torches.
Check Stock

VANTIYAUS Finger Lamp (2 Packs/4PCS) Thumbs Lamp, Magic Lamp up Finger Magic Trick, Fake Finger, Prank Toy Tool for Halloween

  • Rubber lamp up thumb tip magic trick fingers,Magically lamp up the dark with your fingers!.
  • Automatically turns on when inserted onto fingertip, turns off when removed,Secretly turn on the lamp with pressure on the thumb tip..
  • Powered by 2 x 3V CR1620 batteries,Suitable for most thumbs and fingers.Halloween decorations clearance movies.
  • Perfect novelty gift for yourself and those around you..
  • Package include: 4 x Magic Thumb lamp,4 x batteries 1x VANTIYAUS Box.
Check Stock

HOWOD Pocket Hole Jig Kit, Professional and Upgraded All-Metal Pocket Screw Jig. (Metal)

  • ...sable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip hydration process..
Check Stock

Bright Blue 2-Piece Set: Things 4 Strings Bow Hold Buddies Violin/Viola Teaching Aid Accessory

  • Flexes Thumb Touches Intersection of Frog and Stick: A bent yet flexible thumb is key to tone production. This accessory directs the inside corner of the thumb tip to make contact with the bow at the intersection of the frog and stick, at a 45 degree angle to the bow stick. This position, with a bent and flexible thumb, allows the player the options to exert upward pressure to the stick and/or pushing against the frog on down bows to get toward the tip of the bow..
  • Supports Curved Pinky: A curved yet flexible pinky finger is critical to bow control, tone production and a relaxed bow arm overall. The pinky finger correctly approaches the stick from slightly to the rear, positioning the finger tip so the finger can remain curved and flexible without sliding off the front of the stick. This allows the player to easily move the bow to play at the frog, and to counter balance the weight of the tip of the bow while playing in the lower half of the bow..
  • Positions index finger to rest on bow: A correctly positioned index finger is key to bow control and tone production. This accessory ensures the index finger's contact with the bow stick will be between the first and second knuckles. This allow the finger to control downward pressure on the bow stick, as well....
Check Stock