Categories

Best Tie Down Points

Pulse | Canoe Car Carrier Kit, 4 Foam Blocks, 2 Straps and Storage Bag, Transport Canoe

  • VERSATILE - Use to Mount and Secure Kayaks and Canoes on Vehicles with No Lashing Points.
  • SECURE - Works Under Hood and in the Trunk Where They Lock Into Place with Pressure, Securing the Bow and Stern in Place When Used in Conjunction with Tie Downs.
  • SIMPLE AND FAST - Quick, Easy, and Effective Solution Providing Anchoring Points for Boats and Kayaks to Your Vehicle.
  • INSTRUCTIONS - Open Your Hood/Trunk, Place Loop End Out, and Close - Pressure Does the Rest! Then use the end of the strap as an anchor point and use Sentry Ratchet Tie Down Rope to secure your boat..
  • Ratcheting bow and stern tie-down racks for transporting kayaks.
Check Stock

REAR TRANSOM BOAT TRAILER STRAPS RATCHET TIE DOWNS STRAP, Made in NZ - 1.5\ x 4’ Heavy Duty Rear Transom with PVC Hooks For Trailered Boats, Pontoons & Jetskis - 3,300lbs Break Strength - (Pair) Black

  • ...n important feature for marine tiedowns. Made to the highest standard so your Boat and/or Watercraft is safely secured to your trailer..
  • QUALITY BOAT TRAILER STRAPS - These Trailer tie downs have been designed specifically for Boats, Pontoons and/or Watercrafts. They enable a range of distance between the attachment points on your Boat and your trailer. Designed as a single piece Tie Down strap with the webbing permanently fed through the ratchet, allowing for quick and easy setup. We use PVC Safety s-hooks, for ease of use and added safety.
  • EASY TO USE TRANSOM TIE DOWN - Simply attach the hooks to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Then tighten by pulling the ratchet handle up and down until the tie down strap is tightly secured. Do not over tension as this could damage your watercraft..
  • THE AEROFAST GUARANTEE - We live and breathe tie downs and we are the market-leading manufacturers of Tie Downs in New Zealand and Australia. Our reputation is built on the durability and reliability of our products. We are so confident that you will be 100% happy with our products, that if you are not, we'll refund your purchase! To order your Boat Rear Transom Ratchet Strap Tie Down Kit, Click Add to....
Check Stock

Rear Transom STAINLESS STEEL Ratchet Strap Tie Downs, Made in NZ - 1' x 2.5’ Heavy Duty Endless Tiedown with Floating PVC Hooks For Trailered Boats, & Jetskis - 2,400lbs Break Strength - Pack of 2

  • ...the highest standard so your Boat, Jetski or Watercraft is safely secured to your trailer..
  • QUALITY BOAT & JETSKI TIE DOWN KIT - Aerofast started manufacturing tie-downs nearly 40 Years ago in New Zealand. Designed specifically for Boats, Jetskis and Watercraft. They enable a range of distance between the attachment points on your Boat, Jetski or PWC and your trailer of between 12” and 30”. Designed as a single piece Tie Down with the webbing permanently fed through the ratchet, allowing for quick and easy setup. We use PVC Safety s-hooks, for ease of use and added safety.
  • EASY TO USE - Designed to be tough, durable and easy to use. Simply attach the hooks to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie down is tightly secured. Do not over tension as this could damage your watercraft..
  • THE AEROFAST GUARANTEE - We live and breathe tie downs and we are the market-leading manufacturers of Tie Downs in New Zealand and Australia. Our reputation is built on the durability and reliability of our products. We are so confident that you will b....
Check Stock

Youliang 10PCS Bleed Fitting Rubber Cap for Bike Hydraulic Disc Brake, Black

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 5 Pieces = 1Pcs 12inch Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), 4 Pcs Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

PAULINN Boat Trailer Transom Tie Down Straps 2400 LBS, Heavy Duty 1 Inch x 4 FT Adjustable Tie Down Straps Ratchet w/ Quick Release Buckle & Anti-Scratch Hooks, for Trailer Marine Jet Ski Pontoon

  • 【SECURELY TRANSPORT】1 Inch x 4 Feet (W x L), 2400 LBS per ratchet strap or 4800 LBS as a pair. Enable a range of distance between the attachment points on your boat, marine, jet, ski or PWC and your trailer of between 12” to 48”. PAULINN ratchet strap tie downs are of importance to fix a boat on the trailer. Without these ratchet straps, the boat will be bounce on the trailer, and leave the trailer when the trailer hit a curb..
  • 【SUPERIOR ANTI-BREAK STRENGTH】Made from heavy duty nylon by premium webbing technic, these tie down straps own high anti-break strength of 2400 lb / 1089 kg and the working load limit of 800 lb / 363 kg. It does not stretch or lose its strength when wet and when it is under the sun exposure..
  • 【ANTI-SCRATCH】Dual metal hooks are coated with soft PVC coating, and the quick release buckles covered by the HOOK&LOOP pads are to avoid scratch. These quick-release buckles are to adjust and fasten your straps easily and efficiently..
  • 【EASY to USE】PAULINN ratchet straps are SELF-CONTAINED in the ratchet mechanism housing to use straightly. You can just simply attach the hooks of your rachet tiedowns straps to designated tie down points on the watercraft and the trailer, then pull the tie down straps to the desired lengt....
Check Stock

CONDOR E-Track Plate SC2000 Motorcycle Wheel Chock

  • Make your life easier with Condor brand tie-downs..
  • Perfect for all motorcycles, ATV's, snowmobiles, and virtually anything that needs to be strapped down..
  • Makes it easier to tie down any powersport vehicle quickly, safely, and securely..
  • Include built-in Self Loops which allow the webbing to easily wrap around, frames or other mounting points..
Check Stock

US Cargo Control Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

Torklift C2205 C3209 Pairs of Front and Rear Camper Tie Downs for Chevrolet Silverado 2500 GMC Sierra 2500

  • Fits: 2007 Chevy/GMC 2500 New Body - Regular/Crew/Extended Cab - 4x2 & 4x4 - Gas/Diesel - 6.5' Bed Length // 2008-2010 Chevy/GMC 2500 - Crew/Regular/Extended Cab - 4x2 & 4x4 - Gas/Diesel - 6.5' Bed Length.
  • Kit Includes: (2) Front Camper Tie Downs // (2) Rear Camper Tie Downs.
  • Product Details: Dramatic improvement with vehicle handling and stability // Avoids bed and bumper damage by attaching to the strongest part of the truck: the frame // Provides safety, security, and stability while on the road.
  • The only truck camper tie down that mounts using independent tie down points that bolt directly to the truck frame // Fast, no-drill installations.
  • No loss of ground clearance // Hidden design when not in use // Lockable with Tie Down Locks (*SOLD SEPARATELY*) // Legendary Lifetime Warranty // Made in the USA.
Check Stock

Tie Down Strap Rings Tie-Down Anchors Hooks Stainless Steel Lashing Rings with Red Powder Coating for Tiedown Attachment Points for Dirt Bike, Motorcycle, Trailer, Pickup, Truck,Camper,RV (Pack of 10)

  • ... ✅【Good Addition】- 10 Pack tie down anchors hooks can be easily installed almost anywhere there is a bolt, and support up to a 3/8" or 10mm hardware. You can use them to anchor any tie-downs, like ropes, bungee cords, truck bed cargo nets or straps. Widely used as tie down points for dirt bike, motorcycle, Jeep, trailer, pickup, truck, bed camper, ATV, kayaks, RV..
  • ✅【Durable Material】- These tie down anchor rings are miracle workers! They look small but are very strong. Made of thicker heavy-strength stainless steel with black powder-coating, it makes the surface is flat and frosted for better friction. Stand up to the toughest weather, protects against corrosion and rust for long-term use..
  • ✅【Dimensions】- The tie down hook ring with a length of 1.8", a width of 1.1", a height of 0.6" and a thickness of 3mm. The diameters of the mounting hole and anchor hole are 10mm and 20mm respectively. The angle between the mounting surface and the tie-down surface is 135 degrees, see the mechanical sketch image for a visual guide..
Check Stock

Putco 89895 Locker Side Rails for Silverado/Sierra

  • Putco's traditional locker side rail design features unique cut-outs in each bed rail end providing innovative tie-down points.
  • Solid die cast construction on the bed rail ends allows for extreme tie down strength.
  • Easy no drill installation via stake pockets.
  • Stainless tubes are chromed to 44 hour CASS.
  • Tubes and rails are backed by Putco's NeveRust Lifetime Warranty.
Check Stock

Boat Tie Down Straps to Trailer | Boat Transom Tie Down Straps Made in New Zealand with Superior Strength of 2,400lbs UV Treated | 1\ x 2.5’ Heavy Duty Ratchet Boat Straps Trailer Tie Down (Pack of 2)

  • ...e its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
  • Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
  • Made in New Zealand - Our boat trailer transom tie down straps are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means no damage from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These boat trailer tie down straps have been designed for the tough USA conditions and made to last..
  • The Aerofast Guarantee - We live and breathe boat trailer tie-downs and we are the market-leading manufacturers of boat tie downs in New Zealand and Australia. Our reputation is built on the durability ....
Check Stock

Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 2.5’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps - Jet Ski Tie Down Straps - Made in New Zealand

  • ...s go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
  • Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
  • Made in New Zealand - Our boat trailer transom tie down straps are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means no damage from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These boat trailer tie down straps have been designed for the tough USA conditions and made to last..
  • The Aerofast Guarantee - We live and breathe boat trailer tie-downs and we are the market-leading manufacturers of....
Check Stock

Putco 88850 Black Powder Coated Locker Side Rails for Colorado/Canyon

  • Putco's traditional locker side rail design features unique cut-outs in each bed rail end providing innovative tie-down points.
  • Easy no drill installation via stake pockets.
  • Stainless steel 1.75" diameter tubes feature powdercoated black finish.
Check Stock