Categories

Best Tig Welding Electrode Holder

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

  • 200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
  • 12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
  • Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
  • TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
  • For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..
Check Stock

HITBOX TIG Welder 110V 220V 200A 2T 4T TIG Stick MMA IGBT Inverter High Frequency Dual Volatge Welding Machine (Model: TIG200A)

  • Ship from the United States. Dual Volt 200 amp IGBT Tig Stick Welder with tig torch, earth clamp, electrode holder and gas tube..
  • Adopt newly IGBT inverter technology, Compared to MOS Technology, greatly reduce breakdown.
  • Inverter frequency up to 100KHZ, the technology is mature, stable performance.
  • TIG Welding thickness 0.5-6mm, and application of electrode diameter (MM): 2--3.2mm.
  • Easy arc ignition, litter spattering, stable current and good shaping.
Check Stock

Eastwood Mp 200 Amp Welder Electrode Holder Stick Rod Stinger Copper Plier Electrode Clamp of Welding Machine with 3 Meter Long Cable

  • 200 Amp Electrode Holder For Stick/Arc Welding With 3 Meter Long Cable.
Check Stock

EXCELLWAY 200A ARC/Stick/LIFT TIG Welder,110V/220V IGBT Inverter Portable Stick Welder,Digital Display Built-in Hot Start ARC Force Welding Machine,Overheating Overload Protection ARC Welder

  • ...essional or DIY use.Hot Start ARC Force: Support Rods:2.6mm- 3.2mm Rods.
  • 【60% High Duty Cycle】: Long-term continuous work. EXCELLWAY Welding Machine can work continuously for a long time, with high work efficiency and good effect..
  • 【What you will get】:1x EXCELLWAY 200A MMA/Stick/LIFT TIG 2 in 1 Welder,1x 10Ft Electrode Holder,1x 10Ft Work Clamp,1x Welding Brush,1x User Instruction,1x Gloves,1x Handheld Welding Cap..
Check Stock

SSIMDER Stick Welder Machine Mini ARC Welder 200A 110v/220v Hot Start ARC Force Anti-Stick Portable ARC TIG Welding Machine With Smart LCD IGBT

  • ...input voltage, the real current is 200A. This mini welding machine weighs only 5 lbs, it's lightweight and portable so you can take it anywhere for welding..
  • 【Intelligent LCD Digital Display】 This ARC-200S stick welder machine has an intelligent LCD digital screen, which displays the recommended size of the electrode while adjusting the current. This stick welder includes ARC mode, hot start function, arc force and TIG mode, you can switch to different modes and adjust accordingly. Great for beginners..
  • 【Adjustable Hot Start and Arc Force】 The ARC-200S ARC Welder comes with Adjustable Hot Start Function, which helps to improve the reliability of ARC Striking and Reduce the Spatter while Welding. The ARC Force Function on this ARC Welder can adjust resistance of ARC to Minimize electrode sticking..
  • 【ARC & Lift TIG 2 in 1 Function】This ARC-200S is also an ARC & Lift TIG 2 in 1 welder, which can be used as ARC/MMA stick welder or Lift TIG welder. (TIG torch and consumables need separate buy)..
  • 【What’s more】SSIMDER is a professional welding machine manufacturer, we aim to provide a better welding tool and make welding easier. If you have any questions, please feel free to contact us..
Check Stock

Weldpro Omni 210 Dual Voltage 115V/230V AC/DC Multi-Process Welder - MIG/Flux Core/Stick/ACDC High Frequency TIG with Pulser and Aluminum Balance/Frequency Control 3 year warranty welding machine

  • Weldpro’s new 200 Amp Multiprocess welder now includes AC/DC TIG Welding with Hi Frequency Start and Pulse Control.MIG/Stick/ AC&DC TIG/ Flux Core/ Aluminum Spool Gun all new design with FOOTPEDAL and TRIGGER SWITCH..
  • Dual Gas inputs for dedicated Argon and MIX/CO2 tanks. MIG gun and TIG torch can be connected simultaneously for ease of switching between MIG and TIG.All new easy to use, multifunction data display and controls that make changing welding processes and parameters simple even for beginners..
  • 200A Welding Current across ALL PROCESSES allows welding of various thickness material and different types of base material..
  • Included VRD feature with Hi Temp and Overload protection with indicator. User adjustable inductance.Operates off 115V/230V standard household current.
  • What’s Included: 10ft NT1 MIG gun, 12ft CK 17-12-RSF Flex head TIG torch, 5AWG 10ft 200A electrode holder, 5AWG 10ft 300A T-shape earth clamp CGA 580 gas flow meter with 4.5ft gas hose, Power adapter, 0.030’’-0.035’’ knurled drive roll, 0.024’’-0.035’’V-Groove drive roll, AK-3 accessory kit, Weldpro CK17 torch protection cover, Trigger button for TIG torch, Weldpro SSC control foot pedal.
Check Stock

63PCS TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit for WP-17/18/26

  • The 63pcs Tig Torch accessories (consumables).
  • Use for:WP-17 WP-18 WP-26 TIG Welding Torch, for many locations of the pipeline TIG welding arc welding and arc welding, can be welded carbon steel and some low alloy steel..
  • Electric conductivity similar with: 2% thoriated tungsten electrode at either AC or DC.No need changing any welding program..
  • Applicable machine: Mitech, Longetivity,Rilon, Krypton, Riland, Jasic, Chiry, UNT, Berlan etc.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher..
Check Stock

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Powerful Welding Capability: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5 Pound Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Complete Welding Kit: Includes MIG Gun(2.8M), Ground Clamp and Holder (2M), 220V to 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, and Welder Operation Manual. Processes recommended for MIG-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium..
  • ️★Intuitive Synergic Design: Synergic Control with automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. The MIG-200 is capable of true lift TIG (TIG Lift Torch not included) welding as well as stick welding..
  • ️★Safety Features: Automatic protection function for over-current, over-voltage, and over-heating..
Check Stock

hynade Tig welder TIG200GPACDC 200 Amp AC/DC Tig Welder/Arc/Spot Welder with Pulse AC/DC, Digital Inverter Dual Voltage 110/220V Aluminum Tig Welding Machine

  • Digital TIG200 Pulse ACDC Tig welder,this welding machine is 200Amps TIG/Stick with AC DC function works great with aluminum, Pulse function works great with steel stainless steel and thin metals. Stick function easy weld electrode 7018, 6013..
  • Tig welding machine dual voltage 110/220V, the aluminum tig welder will easy weld 1/4’’ Aluminum and 3/8’’ Mild steel. Machine come with nice 4 meters TIG17 torch..
  • The tig stick welder advance IGBT Inverter technology with PWM Digital control (Pulse Width Modulation ), Frequency is 50/60Hz, High frequency arc starting. (HF Arc starting), Need to touch metal start the arc..
  • 2T/4T TIG torch control, the multi process welders with digital function Pre Gas Time, Start current, up slope and down slope time. Finish current and post gas time can be adjust, Software control machine Square wave AC/DC TIG, Easy to get TIG starting..
  • This ARC TIG welding machine can auto save the setting of welding parameter before power off, Great to works with foot pedal (The pedal is not included in standard accessories), We suggest 63A power breaker..
Check Stock

RX WELD 55PCS TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit For WP-17/18/26

  • 55pieces TIG Torch Accessories (consumables).
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Multi-Functions In One Machine: IGBT Full 30-200Amp(Max)With Digital Display, Reliable Quality And Stable Performance.Suitable For MMA, Lift TIG, Flux MIG, Gas MIG,Big Enough To Handle 2 To 10 Pound Rolls Of Wire.
  • ️★110V/220V Powerful Machine: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5KG Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Include:MIG Gun(2.8M), Ground Clamp And Holder (2M),220V To 110V Adapter , Drive Roller Wheel,Contact Tips,Gass Nozzles，Welder Operation Manual . Processes Recommended-MIG-Cast Iron,Copper,Brass,Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron,Copper,Brass,Titanium.
  • ️★Synergic Control,Automatic Change Of The Voltage & Wire Feeding Speed By Adjusting The Amperage Or Choosing Different Thicknesses.The MIG-200is Capable Of True lift TIG(Need Buy Extra Tig Lift Torch,Not Included Inside Product) Welding As Well As Stick Welding ,The MIG-200 Is An Intuitive Synergically Designed MIG/MAG/ Flux Core/ARC/Lift TIG Welding Machine Safety, Automatic Protection Function For Over-Current, Over-Voltage And Over-Heating.
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • COMPACT DESIGN ---- Welding electrode holders have strict quality control and quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
  • FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,....
Check Stock