Categories

Best Tight tolerance Fittings

Strong Hand Tools, Pipe Alignment Clamp, with Quick Acting Screws, CPA60

  • [PROFESSIONAL PLUMBER TOOL] TICONN PEX plumbing tools have efficient ratcheting and self-releasing mechanism that guarantees a proper rock-solid cinch. This tool is designed to accept ASTM 2098 compliant stainless steel clamps..
  • [SIMPLE & RELIABLE] Made with tight tolerance and comes pre-calibrated, offering a simple and ready-to-use PEX crimp tool for novice DIYer and professional plumbers. This universal tool does not require any additional adjustment for all Stainless Steel clamp sizes..
  • [PRECISE RATCHETING MECHANISM] PEX clamps are securely clamped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows the PEX tool to achieve desired compression without hesitation..
  • [DURABLE & EASY] The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition. These handles have enough leverage to comfortably crimp clamps PEX pipe on any PEX Fittings..
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and lifetime warranty. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock

Sealproof 1.5

  • . Successfully tested for toxicity by an independent laboratory for use in Aquaculture.Above and below ground installations.
  • For use with PVC Schedule 40 type fittings.
  • Use with Listed PVC solvent cements and primers.
  • Manufactured in the United States from high quality virgin PVC compound.
  • Less fittings required compared with PVC pipe.
  • Flexible PVC wall and cover for easy handling and installation.
  • FDA non-toxic formulation in compliance with IAPMO TSC 31-90.
  • Rigid PVC spiral resists crushing and impact.
  • Flexible for easy handling and installation.
  • All psi and va. rating are based on an open ended system at ambient temperatures.
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Camco 39855 RhinoEXTREME Compartment Hose - 2', Orange

  • Perfect for Tight RV Sewer Compartments: Hose makes hookup easier in tight RV sewer compartments.
  • Superior Abrasion-Resistant Exoskeleton: Hose has superior abrasion resistance due to its exoskeleton design.
  • Improved Compression: Compress, bend or crush the hose and it will maintain its shape.
  • Pre-Attached Swivel Fittings: Fittings swivel for easy connection.
Check Stock

SIQUK 2 Pcs PTFE Teflon Tube 2M 4 Pcs PC4-M6 Quick Fitting 4 Pcs PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament

  • CHPOWER PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..
Check Stock

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer

  • 100% Original Capricorn XS Series tubing..
  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate..
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10..
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS,....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for....
Check Stock

YAMATIC Pressure Washer Jumper Hose 3/8' Whip Hose, 4FT Hose Reel Connector Hose for Pressure Washing, 4000 PSI Rated

  • 【Heavy Duty】YAMATIC pressure washer jumper hoses are available in various lengths to accommodate all cleaning scenarios. This hose has a wrapped black rubber jacket specifically manufactured for short runs of high pressure. Rated 4000 PSI working pressure, withstands pressures up to 4500 PSI..
  • 【Durable】Pressure Washer Connector Hose features a durable, one layer wire steel braid design with a seamless inner tube for high pressure applications. Designed for long life, high pressures and increased tolerance to handle abuse..
  • 【No Leaks】Come with USA standard pipe thread, 3/8” Male NPT fittings installed at both ends. One side is fixed (immobile) and the other is swiveling so that you can install in tight, fixed locations..
  • 【Universal】This pressure washer whip hose works temperature up to 250°F, can be used to connect a high-pressure hose reel to hot water or cold water pressure washer..
  • 【Application】Pressure Washer Jumper/Connector Hose can be used as a bypass hose from unloader to pump, connector/whip hose from pump to heater coil, heater coil to the outlet, and for connecting pressure washer to a hose reel. Also is an ideal connector hose for carwash self-service bays and pump rooms..
Check Stock

Terisass Bleed Screw M10 1.0mm Motorcycle Brake Master Cylinder Bleed Screw Aluminum Nipple Banjo Bolt with 2Pcs Washers & O-Ring Kit Universal(Black)

  • 【Why do you need it】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Replacement bleed nipple for the front or rear brake lines..
  • 【Banjo Bolt Bleed Screw】M10x1.0mm Motorcycle Brake Braking Caliper Bleed Screw Nipple with Dust Cap.
  • 【Fitment】:Also be fitted to back of the master cylinders to bleed out trapped air. Easy installation, suitable for many motorcycle applications..
  • 【High Quality】：This bleed screw is made of high quality aluminum, anodized coloring for rust and corrosion resistance, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
  • 【Excellent Perforamnce】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Each component is precision-machined to exact tolerances for trouble-free.
Check Stock

Grease Gun Coupler, Locks onto Metric and SAE Zerk Grease Fittings, Positive Lock, Fits All 1/8” NPT Type Grease Guns, Quick Disconnect Lever, 10,000 PSI High Pressure, by Tech Team

  • Positive locking quick disconnect for secure attachment and easy release of zerk fittings..
  • The grease gun coupler allows you to put grease into zerks that are difficult to get at and includes an 8” high pressure hose for reaching into tight areas. Flex tube for increased reach..
  • The coupler has a 1/8” NPT thread that is compatible with all types of grease guns manual, electric, and pneumatic..
  • Zerk fittings included to replace clogged, broken, or damaged fittings..
  • Includes one (1) positive lock quick disconnect clamp, one (1) 200 mm flex extension tube, two (2) 90-degree grease fittings, two (2) 45-degree grease fittings, two (2) straight grease fittings, one (1) precision nozzle..
Check Stock

TICONN PEX Clinch Clamps Crimping Tool for 304 Stainless Steel PEX Clamp Rings, PEX Pipe Tubing Connection (Tool Kit)

  • ...R TOOL] TICONN PEX plumbing tools have efficient ratcheting and self-releasing mechanism that guarantees a proper rock-solid cinch. The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition. These handles have enough leverage to comfortably crimp clamps PEX pipe on any PEX Fittings. This tool is designed to accept ASTM 2098 compliant stainless steel clamps..
  • [SIMPLE & RELIABLE] Made with tight tolerance and comes pre-calibrated, offering a simple and ready-to-use PEX crimp tool for novice DIYer and professional plumbers. This universal tool does not require any additional adjustment for all Stainless Steel clamp sizes..
  • [PRECISE RATCHETING MECHANISM] PEX clamps are securely clamped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows the PEX tool to achieve desired compression without hesitation..
  • [ALL-IN-ONE KIT] This package includes all the tools you need in one kit, 1 PEX clinch clamps crimper, 1 PEX pipe cutter, 1 portable storage bag and 48 pcs PEX pipe clamps, which contains 6 pcs 3/8'', 16 pcs 1/2'', 6 pcs 5/8'', 14 pcs 3/4'' and 6 pcs 1'' PEX rings..
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our product....
Check Stock

Mophorn Backhoe Thumb 36 inch Hydraulic Backhoe Excavator Thumb Attachments Adjustable Boom Tractor Excavator Weld On 1/2 inch Teeth Thick Steel Plate Assembly 12MM Bolt-On Design

  • Item Specifications: The tooth plate of this backhoe thumb is 32 inches long, 6 inches wide, and 1/2 inch thick. The weld plate is 19 inches long.
  • please measure your bucket before ordering to ensure a proper match..
  • Heavy-duty Steel Structure: Our backhoe thumb is made of heavy-duty thick steel and designed with a triangle structure. Thus, it has acquired excellent durability and stability. The surface is also powder-coated to resist corrosion..
  • Easy to Assemble and Weld: Each part of the thumb has been plasma cut for tight tolerance, and all necessary fittings are provided to make sure you can assemble and weld the high-quality backhoe thumb without trouble..
  • Bolt-on Design: The simple-and-convenient bolt-on design allows for easy removal when not in use.
  • the three mounting holes with different positions enable you to adjust the angle of the thumb according to your needs..
  • Wide Application: Many people around the world have widely used our backhoe thumb. It is considered a perfect attachment tool for tractors, excavators, and other equipment to help you pick up objects more easily..
Check Stock

Mophorn 18' Backhoe Thumb, 1/2' Teeth Thickness Heavy Duty Excavator Thumb, Black Steel Weld On Thumb Attachments with 12mm Bolt-On Design Adjustable Mechanical Thumb for Backhoe/Excavator

  • Item Specifications: The tooth plate of this backhoe thumb is 18 inches long, 6 inches wide, and 1/2 inch thick. The weld plate is 19 inches long.
  • please measure your bucket before ordering to ensure a proper match..
  • Heavy-duty Steel Structure: Our backhoe thumb is made of heavy-duty thick steel and designed with a triangle structure. Thus, it has acquired excellent durability and stability. The surface is also powder-coated to resist corrosion..
  • Easy to Assemble and Weld: Each part of the thumb has been plasma cut for tight tolerance, and all necessary fittings are provided to make sure you can assemble and weld the high-quality backhoe thumb without trouble..
  • Bolt-on Design: The simple-and-convenient bolt-on design allows for easy removal when not in use.
  • the three mounting holes with different positions enable you to adjust the angle of the thumb according to your needs..
  • Wide Application: Many people around the world have widely used our backhoe thumb. It is considered a perfect attachment tool for tractors, excavators, and other equipment to help you pick up objects more easily..
Check Stock