renvena Universal Fan Blades Replacement with nut Cover, for 16 Inch Standing Pedestal Fan Table Replacement Camper Fan Blade Type N One Size
- Universal plastic silence fan blade 3/5/7 leaves with nut cover for 16 inch household standing pedestal fan table fanner fan accessories.
- Made of high quality plastic or aluminum material, lightweight, non-toxic, sturdy and durable for long time, not easy to break or deform.
- This fan blade is designed with 3/5/7 leaves, low noise and able to withstand high temperature. Aluminum fan blade has complete accessories.
- Easy to install and use, just tighten the nut cover. Easy to clean, can be washed directly with water, bringing more convenience for your daily life.
- A genuine replacement part, which is suitable for most standing pedestal fan or table fanner. Please confirm the size before placing an order.
Check StockYOOJIA 16 Inch Universal Plastic Fan Blade with Nut Cover Replacement Accessories for Household Standing Pedestal Fan Table Fanner Type C One Size
- Universal plastic silence fan blade 5 leaves with nut cover for 12/14 inch household standing pedestal fan table fanner fan accessories.
- Made of high quality plastic material, lightweight, non-toxic, sturdy and durable for long time, not easy to break or deform.
- This fan blade is designed with 5 leaves, low noise and able to withstand high temperature. 2 sizes in gray or white color for you to choose from.
- Easy to install and use, just tighten the nut cover. Easy to clean, can be washed directly with water, bringing more convenience for your daily life.
- A genuine replacement part, which is suitable for most standing pedestal fan or table fanner. Please confirm the size before placing an order.
Check Stock
Kitchen Sink Hole Cover, 2\ Faucet Hole Cover Sink Basin Stopper Cover Stainless Steel Blanking Plug for Sink Faucet Hole Leakage Prevention, Matte Black
- Perfectly Clogging: Kitchen sink hole cover diameter 2" fits most any hole on your sink, perfectly covers unsightly holes in your sink, and also replaces rusty and leaky sink hole covers. Keep the kitchen clean and tidy to prevent water leaks..
- Durable Material: Faucet hole cover is made of zinc alloy, and the threaded cap nut and backing plate are made of stainless steel. Durable, not easy to corrode, can be used for a long time. Equipped with a rubber gasket for a more secure seal..
- Easy to Install: Put the sink hole cover over the faucet hole, then tighten the wing nut under the sink. The 2" long threaded shank makes it easy to screw into place. Easy installation without tools and without calling a plumber. The washer holds it securely, no need to worry about it coming loose..
- Beautify Kitchen: The matte black finish perfectly matches your black faucet sink. Smooth surfaces and stylish finishes make your kitchen more beautiful and tidy..
- 100% Guarantee: All Ancable products come with our 100% No Questions Asked Guarantee. We care about only putting out high-quality products that satisfy your needs. If you have any questions, please contact us..
Check StockPeugeot Baya Salt Mill 3-Inch Natural
- Made of beech wood with brushed stainless steel top nut.
- Tighten nut for finer grind, loosen nut for coarser grind.
Check StockPeugeot - 36621 Peugeot BALI FONTE Cast Iron Pepper Mill, 8cm/3 In, Blue
- Made of beech wood with brushed stainless steel top nut.
- Tighten nut for finer grind, loosen nut for coarser grind.
Check StockPAGOW Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger
- SAVES YOUR TIME: Wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane....
- Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
- Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
- This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
- This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check StockEstilo EST3316 Beverage Dispenser Replacement Spigot Stainless Steel,Single
- Made of high quality lead free food grade stainless steel, non- corrosive and extremely durable..
- Fits 5/8 of an inch or 16mm openings and fits beverage dispenser up to 11/16 inch or 17 mm thick..
- Great replacement of those cheap easy to break plastic spigots that come with your favorite beverage dispenser.
- Ideal for dispensing your favorite drinks, cocktails, juices, water, wine, tea etc..
- For easy assembly use a ¾ inch wrench to tighten the nut, to not over tighten, for optimum care rinse after using when nut is loosened and handle partially opened..
Check StockPAGOW 2pcs Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger
- This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing....
- Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
- Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
- This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
- This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check Stock
Bicycle Kickstands Adjustable, Bike Kickstand Aluminum Alloy Bike Support Kick Stand Side Fit for 24' 25' 26' 27' 28' Tire Cycling Mountain Bike/Road Bicycle/Adult Bike/Sports Bike/Kids Bike (Black)
- 【Height Adjustable】 The height of bicycle kickstand can be adjusted between 13.8"-15.7" (350-400mm). You can loosen or tighten the screw of center kick stand and adjust its height by using the bicycle bracket with a wrench.Package include free 4mm wrench for you to easily install, 4mm wrench for length adjustment..
- 【Widely Compatibity】 With the length of bicycle stand is adjustable,the kick stand suitable for many models of bicycles, such as 22" 24" 26" 28" mountain bikes/road bikes/BMX/MTB/urban commuter bikes/children's bikes/sport bikes/adult bikes / 700 road bike.And this bike stand can be installed on both Rectangular tube and oval tube chain stays with a diameter of 15-28mm. 【NOTE】Please choose the size according to the tire mark, as shown in the picture. Not For Snowmobile..
- 【Stable & Anti-Skid】 Made of firm and durable Aluminum Alloy, top quality and very strong, waterproof and rust-proof, wear-resistant, easy to use and durable. Designed with rubber cover on the bottom of the stand, wider foot cover with anti-skidding design can prevent slipping on wet surfaces and sinking in mud, practical design for supporting the bike stably on the slippery ground.Even if it is often used on hard ground, it does not need to be replaced ....
Check Stock
Metal Flipper Nut, Warehouse Rack & Gondola Shelving, Add Signs to Slot, 100 Pack
- ...y to the shelf slots in gondola shelving and pallet rack uprights. Can be used with both retail gondolas and warehouse racks to attach signage..
- Insert the flipper or metal tab into the teardrop hole on the warehouse rack upright or into the shelf slot on gondola shelving uprights. Attach your signage or display and tighten the screw. As the flipper rotates it will catch the interior wall of the rack upright or the gondola shelf upright. When it hits the internal wall the flipper stops spinning and allows you to tighten the screw all the way..
- Flipper nut is a 1/4" - 20 x 1.25"L threaded screw with a metal flange nut that fits into the teardrop or slot holes on most warehouse rack and pallet rack uprights. It will also work on most gondola shelving slotted uprights. It is used primarily to attach sign holders or retail displays to the upright of the rack..
- Great for use by retailers to add cross merchandising displays, clip strips or other sign holders or by operations managers in factories and distribution centers to add warehouse rack label holders, warehouse aisle signs, location signs and inventory control signs..
- Flipper nut is 100% steel metal construction with a long-lasting bright zinc finish. The screw head is Phillips..
Check Stock
Retractable Clothesline, Coolrunner 9.2ft Retracting Clothes Line Indoor Outdoor Heavy Duty Shower Line with 5 Stainless Steel Clothespins
- Well Made & Sturdy：The retractable clothesline is made of 304 stainless steel and the line is made of braided stainless steel rope can hold up to 33lbs.
- Adjustable Clothes Line: The heavy duty clothesline is auto retractable, you can adjust the length of clothing line according to the space and the maximum length is up to 9.2ft (Note: Please tighten the nut after you pull the clothesline out).
- Good for Indoor & Outdoor: You can hang your wet towels, jeans,socks, carpet cloth and quilt in your laundry room, bathroom, balcony,yard ....
- How to Install: 1.mark the hole position 2. drill holes with 6mm drill bit 3.drive the expansion bolt into the hole 4.tighten the screws 5.cover the base and screw up.
- A Best Gift for Wife & Mother: The laundry line is a must for women who prefers sun drying instead of drying, you can send it for your mother as a Mother's Day Gift,she will gonna love it..
Check Stock
PEF Mount for Wyze Cam Outdoor, Weatherproof Protective Cover and 360 Degree Adjustable Wall Mount for Wyze Camera Outdoor Indoor Wire-Free Smart Home Camera System (Black, 1 Pack)
- Exclusive design: This wall mount is designed for all-new Wyze Cam Outdoor. With the buckle button on cover, no need to use screws while putting your wyze camera into or out of the case, convenient and won't rust..
- Stand up to any weather: Made of premium ABS plastic, this camera case is sturdy and durable enough to protect your wyze cam outdoor from all kinds of potential damages as downpours, blizzards, and heatwaves..
- 360 degree rotation: 360-degree swivel and 90-degree tilt, allowing anywhere with any angle that you want your camera to point. Loose the plastic nut to make the metal joint adjustable.
- tighten the nut after you have fixed the angle..
- Seize the day, Illuminate the night: No influences to the night vision and two-way audio, helps you monitor your home day or night. See, hear, and speak to visitors from anywhere, it’s like being home even when you’re not..
- Everything included: Full installation kit-each pack comes with 1 camera cover, 1 wall mount, necessary screws and anchors, 1 user guider and worry free money back guarantee..
Check StockPagow Deep Power Wing Nut Driver Set- Slot Wing Nuts Drill Bit Socket Wrenches Tools Set Hex Grooved Socket for Panel Nuts Screws Eye C Hook Bolt Q Hanger 1/4 Hex Shank 2
- Size: this steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about....
- This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or....
- Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware....
- Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook....
- This nuts tools A must have for hurricane Snowstorm prone areas.
Check Stock
