Categories

Best Tile Cutting Hole Saw

JINGLING 2.5mm 3/32\ inch Diamond Small Drill Bit Hole Saw Masonry Tools for Glass Tile Stone Pack of 20Pcs

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 6mm 1/4\ inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs

  • Hole/Outer Diameter: 6mm (close to 1/4").
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

JINGLING 3 mm 1/8' inch Diamond Hole Saw Core Drill Bit Masonry Drilling Cutter Tools for Glass Marble Tile Granite Stone Pack of 20Pcs

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • 【Bi-Metal 6-3/8-Inch Hole Saw】The 6 3/8in hole saw made of HSS carbon steel & Bi-metal steel, heavy-duty steel construction and carbide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gy....
Check Stock

Lenox Tools - T29964-64CG LENOX Tools Hole Saw, Carbide Grit, 4-Inch or 102mm (2996464CG)

  • Carbide grit hole saw cuts through a wide range of abrasive materials.
  • Hole saw has a clean-cutting carbide grit edge that won't snag or chip when cutting thin materials.
  • Use the hole saw with a 2L or 7L standard arbor or a 2L SNAP-BACK arbor.
  • Heat resistant carbide teeth for long life in tile and stainless steel..
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

Diamond Hole Saw Cutter Tools Coated Drill Bit Angle Grinder Hole Opener for Ceramic Marble Stone Glass(60mm), Hole Saw

  • PREMIUM DIAMOND MATERIAL: Hole saw cutter tools is made of premium diamond material with high hardness, so it is durable in use..
  • HIGH DRILLING SPEED: Diamond hole saw has high drilling speed, neat and smooth opening, and has no broken edges..
  • SPECIAL DESIGN: Chip removal hole design reduces cutting resistance for easier drilling, it effectively improves work efficiency..
  • PAINT SPRAYING TREATMENT: Paint spraying treatment can avoid rusting of the drill bit..
  • SCOPE OF APPLICATION: Diamond hole saw is suitable for opening and coring of marble, stone, vitrified tile, ceramic tile, etc..
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

Tile Cutter Hand Tool Cut Floor Tile Glass Tile Cut Tiles Straight or Quarter Curve Manual Tile Cutter Tool for Cutting Wall Tile Porcelain Tile and Glass Tile Faster and Cleaner than a Wet Tile saw

  • ...rill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cutter by The Grips When Scoring as You Cannot Apply Pressure to The Handheld Tile Cutter Blade If Held Far Back. If You Do Not Follow These Instructions It Will Not Work for You. DOWNLOAD THE USER GUIDE for Extra Hints and Tips.
  • How To Cut Glass Mirror Stained Glass Sheets Instructions With Tips And Trade Secrets. Do You Know Anybody That Didn’t Break the Last Piece o....
Check Stock

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • ...wel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cutter by The Grips When Scoring as You Cannot Apply Pressure to The Handheld Tile Cutter Blade If Held Far Back. If You Do Not Follow These Instructions It Will Not Work for You. DOWNLOAD THE USER GUIDE for Extra Hints and Tips.
  • How To Cut Glass Mirror Stained Glass Sheets Instructio....
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock