Categories

Best Tile Saws

3 Inch Diamond Saw Blade for Porcelain Tile Granite Marble Ceramics Cutting(5/8 Arbor)

  • Segments Height 8mm, Hole 16mm(5/8")-22.23mm(7/8").
  • HIGH GRADE QUALITY: Hot pressed provides increases durability and long life.
  • SPECIAL: Can be used Dry/Wet, desiggned to provide fast, smooth cutting in a variety of material.
  • VERSATILE: The super thin diamond cutting disc Professional grade for porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board. It will be a perfect partner for tile installers and general homemade DIYers.
  • APPLICABLE MODELS: Suitable for tile saws, circular saws and hand-held grinders.
Check Stock

Ghostrunner - PlayStation 5

  • Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
  • Perfect for slicing through fiber cement board and laminate flooring.
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
  • Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
Check Stock

Lackmond Beast Pro Porcelain Saw Blade - 7" Hard Tile Cutting Tool with Thin Kerf Cutting Edge & 5/8" Arbor - BP7

  • CONTINUOUS RIM CONFIGURATION – For clean and precise cuts wet cuts of porcelain and stone tiles.
  • EXPERT DESIGN – The thin Kerf cutting edge eliminates chipping while cutting. The beast porcelain tile blades are engineered with a reinforced silent core hub which ensures straight cuts and reduces noise. Intended to cut porcelain,, marble, granite, an ceramic tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws.
Check Stock

DEWALT DW4766 7-Inch by .060-Inch Porclean Tile Blade Wet

  • Extended performance diamond matrix provides long life and enhanced material cutting.
  • Continuous rim design provides chip free cutting in all types of tile.
  • XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting.
  • XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up.
  • Premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades.
Check Stock

Makita 2 Pack - 4” Continuous Diamond Blades For 4”+ Grinders & Circular Saws - Precise Cutting For Tile, Porcelain & Stone - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4” CONTINUOUS Diamond Blades For 1” Depth Cutting into TILE, PORCELAIN & STONE Applications | 4" x .79 x 5/8-Inch Arbor, Optimized for Makita 4” & 4.5" Angle Grinders & 4"+ Circular Saws and compatible with All 4” & 4.5" Angle Grinders & Saws.
  • ✅ CUT 3-4X MORE Tile, PORCELAIN, Stone than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for the best Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry | For Best Results, consider using Water to flush out debris and Extend Blade Life.
  • ✅ PRECISELY & EASILY CUT Marble, Granite, Stone, Glass, Porcelain & Ceramic Tile, including Flagstone & PermaBase with Minimal Material Crack OR Shatter Risk | TURBO & SEGMENTED Steel blades are ideal for FASTER and LONG-LASTING Cuts in General Concrete & Non-Tile/Stone Masonry.
  • ✅ AVOID BLADEWEAR Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • ✅ DESIGNED for Hard and Continuous use by professionals in const....
Check Stock

Super Thin Diamond Porcelain Saw Blade with X Teeth,BRSCHNITT 8 Inch (200mm) Diamond Cutting Disc with Reinforced Core Center for Dry/Wet Cutting Porcelain Tile Ceramic Marble Granite

  • ✔Size --8 inch (200mm),diamond height 10mm ,segment thickness 1.8mm ,Arbor 1"-7/8"-5/8"(25.4mm-22.23mm-16mm) , wet or dry cutting.
  • ✔High Performance --The reinforced core center helps to keep balance,unique X Mesh Rim design allows for less friction and more efficient heat dispersion for superior cutting performance.
  • ✔Wide Applications --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
  • ✔Fast And Smooth Cutting --Chip-free,offer faster cutting speed,guarantee a precise and smooth edge finish.
  • ✔Machine --For use on Tile saws, circular saws, and hand-held angle grinders.
Check Stock

Husqvarna 585740301 FLX Trio Pack - 4\ Cutting Tools - Diamond Blade

  • This is a selection of 1 continues, 1 turbo, and 1 segmented blade.
  • The gold crack chasing blades are used for cleaning, routing, and repairing cracks in concrete and other material.
  • Can be used with angle grinders, circular saws and tile saws.
Check Stock

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade , White

  • 3.5” premium diamond coated cutting wheel for cutting wall tile & floor tile..
  • Cuts most tile and masonry materials with ease and precision..
  • Ability to also cut porcelain, slate, stone, cement backer board..
  • Compatible with all Dremel corded and cordless Ultra Saws..
Check Stock

Castlerock CRPCD185 7-1/4 4 Teeth Polycrystalline Diamond-Tipped PCD Hardie Blade for Fiber Cement and Laminate Flooring

  • Polycrystalline diamond (PCD) covers the entire tip.
  • Over 1,000 cuts per blade. Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
  • Perfect for multi-plank cutting, up to 5 planks at once.
  • 7-1/4-inch diameter (184 mm) with 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
Check Stock

WEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring

  • Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
  • Perfect for slicing through fiber cement board and laminate flooring.
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
  • Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
Check Stock

Lackmond Beast Pro Porcelain Standard Core Tile Saw Blade - 7 Wet Ceramic Tile Cutting Tool with Thin Kerf Core & 5/8 Arbor - BPS7

  • CONTINUOUS RIM CONFIGURATION – For clean and precise cuts wet cuts of porcelain and stone tiles.
  • STANDARD CORE DESIGN – Allows contractors to lift tiles to square notches or finish corners.
  • THIN KERF CORE – Cuts cleanly through dense porcelains but has enough rigidity to prevent blade deflection or curved cuts.
  • EQUIPMENT – Designed to be used on tile saws, circular saws, and hand saws.
Check Stock

Delta Diamond Boss Hog Supreme Mesh Turbo 10 Inch Super Thin Tile Saw Diamond Blade, 5/8" Arbor, Wet/Dry Cutting Porcelain & Ceramic Tile, Stone, Granite, Marble (10")

  • SUPREME GRADE DIAMOND BLADE - Boss Hog Supreme uses supreme grade concentration of diamonds offering the best possible cutting solution for clean, fast, efficent cuts..
  • MESH TURBO RIM - Updated rim design offers fast and smooth cutting while the reinforced center adds stability to prevent wobble or vibrations..
  • HIGH PERFORMACE - Fast cutting with long life on a wide range of materials including porcelain tile, ceramic tile, granite, marble, slate, terrazzo, engineered stone and similar materials..
  • SPECIFICATIONS - Blade is 10" diameter X .055 thick and has a 5/8" arbor hole that fits on most tile saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Dry Diamond Drill Bits Set 1/4” Hex Shank Vacuum Brazed 6mm Hole Saws for Porcelain Granite Tile Ceramic Marble for Steady Grips in Most Popular Drills, 2 Packs in Individual Storage Cases

  • 1/4” Dry Diamond Drill Bits - Set of 2 Packs 6mm Vacuum Brazed Diamond Hole Saws for drilling holes in hard materials such as Granite, Porcelain, Tile, Ceramic, Marble, Stone, Glass, Brick.
  • Fit Universally – These Dry Diamond Core Drill Bits Built with 1/4” Hex Shank compatible with most hand-held drill, drill press and any other tools with chucks that accepts 1/4” Hex Shank bits.
  • Make Tough Jobs Easier – Diamond coated drill bit drilling through things like porcelain tile smoothly and easily without cracking or chipping the delicate materials.
  • starting the bit on an angle will prevent drill bit from “walking”.
  • For Professional & Hobby – Decent Diamond hole saws ideal for drilling holes through hard tile to install shower doors, drilling holes in ceramic plant pots vases glass bottles for hobby projects.
  • Convenient Dry Drilling – Wax Filled Diamond Core Bit with wax inside to cool the bit while dry drilling perfect for jobs where water is not applicable.
Check Stock