Best Tin Ingot

Pewter Ingot 2lbs - Britannia Alloy - Lead Free By MS MetalShipper

• ✔️ PEWTER INGOT 2LBS - BRITANNIA ALLOY - 92% TIN | 7.5% ANTIMONY | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up....
• ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used in many....
• ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
• ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 91.9708%, ANTIMONY 7.4992%, COPPER....
• ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb....

RotoMetals Low-Melting Point 158F Alloy Ingot

RotoMetals Lead Free Pewter - Alloy R-92 Casting Ingot 92% Tin 8% Antimony

• Great for casting figurines or Custom Jewelry.

BUNZL - 18x500 Heavy Duty Aluminum foil, EA1

• Approx. 5 lb 4-5 Ingot - This is a high purity Tin based Lead Free Pewter Alloy, that meets or exceeds most Lead Free requirements.
• We certify it to be less than 50 ppm Lead Content.
• It works well in Spin Cast Rubber or Silicone Molds for designs with thick cross sections or a smooth, polished finish and some malleability.

Tomotato Tin Shot, Tin Sample, 100g / 3.5oz High Purity 99.95% Tin Sn Metal Small Lumps Sample

• Weighs approximately 1 pound (+/- .1 pound).

Skyley Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Gold Silver Metal

• Quality material: our graphite casting ingot mold is mainly made of graphite, hardly ash content ensures that the metal purity will not be affected during the metal refining process.
• Fast cold and hot conditions, with good thermal stability, exquisite refining effect.
• Ingot mold dimension: capacity: 5-6 ml, outside dimension: 88 x 47 x 8 mm (3.45 x 1.85 x 0.31 inch), inner dimension: 63 x 38 x 4 mm (2.48 x 1.5 x 0.16 inch), suitable for melting and casting metals such as gold, silver, brass, aluminum, copper, zinc, plumbum, etc..
• Exquisite performance: the mold has nice thermal stability for fast heating and cooling, well corrosion resistance to strong and alkali, good thermal conductivity properties which highly shorten the melting time and save energy, exquisite impact resistance performance to ensure the reliability of product quality.
• Wide uses: our graphite ingot mold can be widely applied for smelting of gold and silver or other metals, test analysis tools and ingot mould for making bars or necklace pendant charms.
• What you get: the package comes with 1 piece of graphite ingot mold with exquisite craftsmanship and versatile usages, which can meet your daily needs, can meet you making bars or necklace pendant charms.

Graphite Ingot Mold, 60ml Capacity Crucible Mould, 2Packs Metal Casting Molds for Casting Melting Refining Gold Silver Aluminum Copper Brass Zinc Plumbum and Alloy (4\x2\x1\-1000g Gold; 540g Silver)

• [PREMIUM MATERIAL] - The ingot mold is made of 99.95% Graphite and ash content less than 0.1% which ensures that the metal purity will not be affected during metal refining. The metal casting molds feature with nice thermal stability and suitable for rapid cold and hot working conditions. The durable graphite ingot molds have a long working life and can be used as more as 20,000 times. Better than Silicon Carbide Graphite Crucibles..
• [INGOT MOLD SIZE] - Outer Dimension 3.93x1.97x0.98inch(100x50x25mm), inner dimensions 3.54x1.57x0.79inch (90x40x20mm). Volume 60ml. Capacity: 1000g Gold or 540g Silver..
• [HIGHLIGHT FEATURES] - Completed with good thermal conductivity, the ingot molds can greatly shorten the melting time and save energy. The premium graphite ingot molds can withstand up to 3600°F (2000 ℃). Strong acid and alkali resistance, good corrosion resistance, impact resistance, 75MPA compression resistance, and 55MPa flex resistance..
• [WIDE APPLICATION] - The metal casting molds can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, lead and more. The ingot molds can also work as graphite crucible for melting into non-ferrous metals, test analysis, or other purposes..

GONGYI High-Purity Graphite Ingot Molds Mould for Melting Casting Refining Metal Copper Gold Silver Aluminum Brass #1-0.65kg-35ml-1.18fl. oz

• Specification: For 665g Gold / 320g Silver.
• Selected Material: Graphite ingot molds are made from high density fine grain graphite, 99.95% Graphite. Ash content less than 0.1%. Better for Refining than Silicon Carbide Graphite Crucibles..
• Well-made: The smooth cavity finish of the graphite ingot mold makes the ingot very easy to remove without sticking to the mold itself..
• Wide Application: The graphite ingot mold receives liquid metal of precious metals and other types of metals, such as gold, silver, metal, aluminum, copper, brass, zinc and so on, and conserves them until they are solidified.
• Extremely Durable: Great alkali resistance and corrosion, super acid and impact resistance..

4 Pieces Graphite Ingot Mould Crucible Ingot Casting Mould Silver 1 KG Gold Ingot Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining (90 x 40 x 20 mm)

• Package comes with: you will receive 4 pieces of graphite ingot moulds in the package, the sufficient quantities for you can meet your DIY requirements in daily life.
• Quality material: our casting ingot crucible moulds are mainly made of graphite material, almost no ash content to ensure that the metal refining process does not affect the purity of the metal, which are durable, sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
• Size detail: the outside dimension of our silver gold ingot mould is approx. 100 x 50 x 25 mm/ 3.94 x 1.97 x 0.98 inch and the inner size is approx. 90 x 40 x 20 mm/ 3.54 x 1.57 x 0.79 inch, and the capacity is about 1 kg gold or 500 g silver, proper size can meet your daily needs.
• Good performance: our ingot crucible mould has good thermal conductivity, which can greatly shorten the melting time and save energy, and can withstand a temperature of 2000 degrees Celsius, good acid and impact resistance, good alkali resistance and corrosion resistance, 89 MPA compressive strength and 48.7 MPa flex resistance.
• Various applications: this graphite casting mould has a wide range of applications, it is suitable for experiments and melting of non-ferrous metals, such as gold, silver, metal, alumin....

Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass

• 8" Ingot Mold Mould is equipped with a wooden handle, which is safer to use..
• 8" iron Ingot Mold Mould, more durable than graphite crucible..
• There are three iron blocks, you can easily adjust the capacity of Ingot Mold Mould..
• You can apply release agent or some oil before use, so that it can be released easily..
• If our products have any problem, pease sontact us,we promise to help you within 24hrs..

2 Kg Graphite Ingot Mold Silver Gold Ingot Mould Casting Ingot Crucible Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining, 85 x 45 x 30 mm (2)

• Ingot size: you will receive 2 pieces graphite ingot molds, approx. 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch in internal size and 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch in external size, which can hold 2000 g gold or 1060 g silver for casting, meet your demand for quantity, allow you to easily and efficiently purify metal materials.
• Composition details: casting ingot crucible moulds are mainly made of graphite material, almost no ash content, to ensure that the metal refining process does not affect the purity of the metal.
• They are durable and sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
• Multiple purposes to meet: these graphite ingot molds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more, also ideal for satisfying lab, test analysis and other purposes.
• Taking the product size into account, small-capacity metal melting projects will be more suitable.
• Characteristics of moulds: these metal casting ingot crucible moulds are completed with exquisite craftsmanship and possess general purpose, can meet your daily needs.
• They are endowed with thermal stability, fast heating and cooling ability, nice corrosion resistance....

2 Pieces Graphite Ingot Mould Crucible Mould for Casting Gold Silver Metal Aluminum Copper Brass Melting Refining (4 x 2 x 1 Inch)

• ...impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance.
• Widely applicable: the mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on.
• Considering the size of this product, it is more suitable for small-capacity metal melting.
• Ingot mould size: 1KG graphite ingot mould outer is 100 x 50 x 25 mm/ 4 x 2 x 1 inch, inner is 90 x 40 x 20 mm/ 3.54 x 1.6 x 0.8 inch.
• 2KG graphite ingot mould outer is 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch, inner is 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch, melting and casting metals like gold, silver, brass, aluminum, copper, zinc, plumbum, and more.
• The capacity is an approximate volume is 1 kg hold or 500g silver.
• What you receive: there are 2 pieces of graphite ingot moulds in this package include 2 different size, enough quantity for you to use, improving your work efficiency in daily life.

American Coin Treasures 1 Gram Swiss Ingot Tribute Novelty

• Comes in a protective sleeve with a history sheet.