Categories

Best Titanium Machining

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

OLITANS T024 Folding Knife for EDC Replaceable blades Pocket knife TC4 Titanium Alloy Handle for Outdoor Survival Hunting and Camping 4.4oz

  • Three types of blades are available: pointed blade, square blade, and serrated blade. These blades are made of 9Cr18mov steel with 59-61 HRC, bringing a razor sharpness that can easily cope with various outdoor needs..
  • Titanium Alloy Handle: Titanium handle length is 4.5 inches, titanium handle has many advantages, high strength, light weight, corrosion resistance. cnc precision machining brings a better grip feel, light, comfortable..
  • Dimensions: measuring 8 inches in overall length, 3.5 inches in blade size, and weighing only 4.4oz.
  • The bearing system makes it possible to open the knife with one hand, and the filpper design can open the knife with a light touch of the finger..
  • 100% SATISFACTION GUARANTEE: Quality and your satisfaction is our top priority. We provide lifetime warranty and no reason return policy to ensure your happy purchase experience..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

10 pcs 4-Flute End Mill Bits, AFUNTA 0.08\ - 0.47\ HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

  • APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium..
  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency..
  • U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • MATERIAL: high speed steel, high hardness, good wear resistance and durability..
  • 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in.
Check Stock

Samior TS105 Titanium Folding Scalpel Knife, Mini Slip Joint Utlitly EDC Keychain Knife with 10 replacable Blades, Craft Working, Box Opening, Light Daily Use Knives

  • Titanium Handle: 6AL4V titanium material, rustproof and corrosion resistant to acid and base, comfortable holding..
  • Small EDC knife for everyday carry. Length closed: 2.4".
  • Utility and Sharp: Replaceable #11 stainless steel Scalpel blade to meet your different needs and versatile situations, from PCB circuit board, mobile phone film, soft wood, paper to simply opening box..
  • Exquisite Workmanship: High precision CNC machining body and ergonomic design for comfortable holding..
  • NON-LOCKING, with no locking mechanism holding blade open, blade held open by resistant pressure. (NOTE: When you want replaceable the blade, only when the blade at unlock angle, then push the blade out.).
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

MecArmy CPW Titanium/Copper Watchband Compass Special Encapsulation Technology High Sensitivety Wristband Compass Fluorescence-Glow in The Dark Sandblasted

  • Watchband fit size: Width ≦ 24mm and Thickness ≦ 4.5mm..
  • Made of TC4 Titanium and Copper, lightweight, corrosion resistant with high hardness..
  • CNC precision machining, Fluorescence - glow in the dark..
  • Multi colors available using different surface treatment..
  • Fits on watchband, bag braid and MOLLE system etc..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ Shank with 1/16\ Cutting Radius (1/8\ Diameter) for 3D Carving Engraving Router Bit, ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ Shank with 1/64\ Cutting Radius (1/32\ Diameter) for 3D Carving Engraving Router Bit, ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/64inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 6.28.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4 Shank with 1/32 Cutting Radius 1/16 Diameter for 3D Carving Engraving Router Bit ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock