Categories

Best Tmc2208 Stepper Drivers

3D Printer Heatsink Kit + Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module (22pcs)

  • Can be applied for passive cooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208.
  • With thermal conductive adhesive tape backing.
  • Stepper motor driver module is not included.
  • Dimension: 0.35 x 0.35 x 0.47 inch / 9mm x 9mm x 12mm (L*W*H), Weight: 0.04 oz / 1 gr per piece.
  • Includes 22 pieces blue aluminum heatsink.
Check Stock

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • ...arlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual....
Check Stock

Tempco Men's Fisherman Vest - TM209-CHARCOAL XL

  • Well Packaged - With a storage box for 102pcs heatsinks, it perfectly divides the heat sinks into 17 categories..
  • Multiple applications - It can Cool Raspberry Pi VRM VRAM CPU GPU Small IC Laptop 3D Printers Stepper Motor Modules TMC2130 TMC2100 A4988 DRV8825 TMC2208. Multiple sizes, multiple application scenarios..
  • Good heat dissipation effect - Various Aluminum and Copper heat sinks with Thermal Conductive Adhesive Tape for cooling Raspberry Pi 4 and electronics components..
  • Different Sizes - 102pcs multicolor heatsinks in different sizes contains 92pcs aluminum heatsink and 10pcs copper heatsink..
  • Package Includes: 102pcs multicolor heatsinks, 1x Storage Box..
Check Stock

3D Printer TMC2208 Stepper Motor Driver DORHEA TMC2208 V1.2 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro 5PCS

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256....
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse....
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825....
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on....
Check Stock

Official Creality Ender 3 V2 3D Printer with Upgraded Silent Motherboard and Carborundum Glass Platform,MeanWell Power Supply

  • 【32-bit Silent Mother Board 】4.2.2 Mainboard with Silent TMC2208 Stepper Drivers,You will Bnefit from a Very Quiet Working Environment During Your....
  • 【4.3 inch HD Color Screen】Creality Ender 3 V2 Equipped with a 4.3 inch HD Color Screen, Brand new operation UI system greatly improve user....
  • 【MeanWell Power Supply】Ender 3 v2 Meeting all the Needs of Fast Heating and Long-Time Printing. the Power Supply is Concealed in the....
  • 【Carborundum Glass Platform】With Better Adherence, and The Model Can be Easier Removed but Not Damage the Models.
  • 【New Features, New Firmware】 Update at any time,Ender 3 v2 firmware involves using a BIN file on a Micro SD card and flashing the new firmware to....
Check Stock

Aitrip 5pcs TMC2209 V3.0 Stepper Motor Driver for 3D Printer SKR V1.3 SKR with heatsink 256 Microsteps Current 2.8A Peak for Reprap Ramps1.4 MKS Gen Mainboard Parts (5pcs)

  • TMC2209 V3.0 Stepper Motor Driver is an ultra-quiet two-phase stepper motor drive chip.
  • It can compatible with StepStick and Pololu A4988.
  •  It can replace the original TMC2208, A4988, DRV8825, LV8729 and so on.
  • 5 pcs Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak.
  • Step/Dir interface with microstep interpolation (up to 256 microsteps).
Check Stock

6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

4PCS TMC2208 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

GeeekPi 102pcs Heatsink Kit with Conductive Adhesive Tape, Cooler Heat Sink Cooling Raspberry Pi VRM VRAM CPU GPU VGA Small IC Laptop LED MOSFET Transistor SCR Voltage Regulator

  • Well Packaged - With a storage box for 102pcs heatsinks, it perfectly divides the heat sinks into 17 categories..
  • Multiple applications - It can Cool Raspberry Pi VRM VRAM CPU GPU Small IC Laptop 3D Printers Stepper Motor Modules TMC2130 TMC2100 A4988 DRV8825 TMC2208. Multiple sizes, multiple application scenarios..
  • Good heat dissipation effect - Various Aluminum and Copper heat sinks with Thermal Conductive Adhesive Tape for cooling Raspberry Pi 4 and electronics components..
  • Different Sizes - 102pcs multicolor heatsinks in different sizes contains 92pcs aluminum heatsink and 10pcs copper heatsink..
  • Package Includes: 102pcs multicolor heatsinks, 1x Storage Box..
Check Stock

Creality Ender 3 V2 3D Printer with Silent Mainboard Meanwell Power Supply Glass Bed and Resume Printing Ideal for Beginners Printing Size 220x220x250mm

  • 【Convenient printing】The upgraded ender 3 v2 3d printer can directly use the SD card to print and upgrade the firmware. These upgrades make....
  • 【Self-developed Silent Motherboard】 Creality Ender 3v2 with TMC2208 stepper drivers and 32 Bits Silent Mainboard of version 4.2.2 always ensures....
  • 【Tempered Glass Bed】The Glass Bed is an upgrade of Ender 3 and Ender 3 Pro. It has excellent adhesion and faster heating speed. When you using the....
  • 【Beginner Friendly】Creality Ender 3 V2 is an ideal FDM 3D Printers for DIY Home and School for Beginners, offers easier to understand operations,....
  • We are devoted to providing high-quality and economical 3D printers, excellent after-sales service to all customers. The 24-hour quick response and....
Check Stock

Creality Ender 3 V2 3D Printer Advanced 32 Bit V4.2.2 Silent Motherboard FDM 3D Printing Carborundum Glass Platform Resume Print Comes with 1.75mm Filament Print Size 8.66x8.66x9.84 inch

  • 【U.S. Engineer Professional Tech Support Safe Buy】100% Original Factory CREALITY Ender 3 V2, we got U.S. Engineers Tech Support and provide....
  • 【V4.2.2 Updated 32-bit Silent Motherboard】Advanced Built-in 32-bit Silent Motherboard with silent TMC2208 stepper drivers, compared to the Ender 3....
  • 【Super Precise Printing】Powerful hot-end modular and high-performance extruder greatly reduce clogging risk and improve printing accuracy.....
  • 【Carborundum Glass Printing Hotbed】Ender-3 V2 FDM printer equipped with the Carborundum Glass Platform, which enables the hotbed heat up quicker....
  • 【Note】Rainbow filament spool not include..
Check Stock