Categories

Best Tnc Connector Lmr400

Crimper Tools for RF connector LMR400,RG8,RG9,Belden 9913,RG213,RG214,RG174,RG316 RF Coaxial Cable,Crimp Tool Hex Die with 0.429' (10.90mm) for all 400 type cables

  • 1.standard Ratchet crimper tools for RF connector.
  • 2.Crimp tool 0.429" (10.90mm) for all 400 type cables (LMR 400, CA-400, CNT-400, SC400 etc).
  • 3.Hex Die with 0.429" (10.90mm) ,0.128" (3.25mm) and 0.100" (2.54mm) cavities4..
  • 4.Works with LMR400 (and other 400-style) cable, as well as RG8, RG9 ,Belden 9913 cable and RG213，RG214 and RG174,RG316.
  • 5.Ratcheting mechanism ensures quality crimps,fixed Jaw Terminal Crimper.
Check Stock

MPD Digital LMR400-N-male-to-N-male-20 Feet LMR-400 Coax Cable N-Male Connector to N-Male Ultra Low Loss LMR400

  • LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems.
  • LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources..
  • CONNECTOR TYPES: N type male to N type male.
  • ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required.
  • Ensures maximum performance for your antenna installation..
  • OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources..
  • WARRANTY: This is A Genuine U.S.A made Times Microwave (TM) Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty.
Check Stock

MPD Digital LMR400-N-male-to-N-male-250ft LMR-400 Coax Cable N-Male Connector to N-Male Ultra Low Loss Transmission Line LMR400

  • LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems.
  • LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources..
  • CONNECTOR TYPES: N type male to N type male.
  • ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required.
  • Ensures maximum performance for your antenna installation..
  • OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources..
  • WARRANTY: This is A Genuine U.S.A made Times Microwave (TM) Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty.
Check Stock

MPD Digital Genuine USA Made Times Microwave 50 Ohm LMR-400-ULTRAFLEX RF Coaxial Cable with UHF PL259 Male Connectors 60 Feet

  • LMR-400 Ultra-Flex Cable: US MADE Ultra Low-loss Double Shielded Times Microwave LMR-400-UF Coaxial Cable can be used as direct replacment for rg-8/9913.
  • Connects Radio Transmitters to Antennas..
  • Connector Type: UHF PL259 type male to UHF PL259 type male.
  • HF/VHF/UHF Radio Communications up to 500 MHZ..
  • Ultra Low Loss: This low loss coaxial transmission Line can be used in almost any application where good handling characteristics, improved shielding, and low loss is required..
  • Outer Jacket Material: Flexible UV Proof FR-PVC, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/89.
  • Made in the USA by Times Microwave Since 1947. Limited Lifetime Warranty..
Check Stock

XRDS -RF 10-Pack PL259 Coax Connectors, PL-259 Connectors, PL-259 UHF Male Solder Connector Plug 50ohm RF Coaxial Connector for LMR400,KMR400,RG8,RG8U,Belden 9913,LMR400UF,7D-FB,RG213 Coaxial Cable

  • Low Loss Low Swr :The attenuates signal of this pl259 connector is less than 0.1db..
  • Great Quality: Body brass Nickel plated . Pin Gold plated. Insulator PTFE(Teflon). withstand high temperature when soldering and will not Melt..
  • Soldering Required：Ideal for build or repair coaxial cables, use this UHF male connector to create your own UHF cable which is widely used on ham radio, Short Antenna Feeder or any other application..
  • Compatible Cable Type: PL259 connectors work great with LMR400,KMR400,RG8,RG8U,LMR400UF,7D-FB,RG213 Coaxial Cable..
  • Package: Come with 10-Pack. All of our items come with a full year of warranty.
Check Stock

75 ft Low-Loss Coaxial Extension Cable (50 Ohm) SMA Male to N Male Connector, GEMEK Pure Copper Coax Cables for 3G/4G/5G/LTE/ADS-B/Ham/GPS/WiFi/RF Radio to Antenna or Surge Arrester Use (Not for TV)

  • ✔Connector: All-copper SMA Male to N Male adapter..
  • ✔Connect from SMA Equipment to N-Style Antennas, receivers, meters, radio transmitters and WiFi Signal Booster Repeater..
  • ✔75 feet(23 Meters) Low-Loss S-LMR400 Size Coax, Impedance: 50 ohm. S-LMR400 offers a significantly larger center conductor and supports better signal retention for longer cable runs and higher frequency use..
  • ✔Double Shielded Coax extension cable assemblies are constructed with top quality extremely low-loss S-LMR400 cable and gold plated connectors. High frequency low loss and low impedance, heat Shrink on Both Ends..
  • ✔Compatible with all SMA female to n female based equipment including modems and routers & WiFi Signal Booster Repeater from Cisco, Digi, Cradlepoint, Proxicast, Pepwave, Sierra Wireless, Sixnet/Red Lion and many others..
Check Stock

Times Microwave - CST-400 - LMR-400 Prep Tool for virtually All connectors

  • All-In-One Combination Prep Tool for prep of LMR400 cables for crimp or clamp connectors..
  • This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use device.
  • Prepare LMR-400 coax cable in two simple steps..
Check Stock

wlaniot PL259 Crimp Connectors UHF Male RF Coax Connector PL-259 Solder Crimp Connectors Compatible with RG58 RG142 RG400 LMR-195 RG303 RG141 Low Loss Coaxial Coax Jumper Cable

  • Type: PL-259 (UHF Male) Crimp Straight RF Coax Connector 5PCS Kit.
  • Crimping line type: RG58/141/142/303/400, LMR-195 HyperLink CA-195R, HyperLink CA195RW, WBC195, LMR195, Belden 8240/8219 Low Loss Coaxial Coax Jumper Cable.
  • Joint properties: Impedance： 50 Ohm | Body Material： Brass | Body Plating： Nickel | Attachment Method： Crimp | Contact Termination:Solder.
  • Package include: 5 Pcs PL259(UHF Male) Coax Connectors.
  • Never worry about any security problems. We are confident in the quality of our connector and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support..
Check Stock

Times Microwave All-In-One Combination Prep Tool for LMR400 Cables - Blue

  • LMR400 LMR-400 is a Registered Trademark of Times Microwave Systems.
  • PL-259 UHF coax cable connectors - Connects Antennas, Receivers, Meters and Radio transmitters.
  • 30ft feet of coaxial cable USA Made LMR-400 Transmission Line Coaxial Cable with Soldered Silver Plated Connectors Teflon Dielectrics.
  • Assembled by MPD Digital - a DoD Supplier - in our GA Facility using MILSPEC Componants.
  • Impedance 50 Ohms Frequency Range DC ~ 11 GHz - PL-259 Connectors are not recomended for use above 300Mhz (See N Male options).
Check Stock

MOOKEERF BNC Male Crimp Connector BNC Q9 Male Plug Crimp Connector for RG8X LMR240 4D-FB Mini8 Coax Cable Pack of 10

  • [Specification] - BNC male crimp connectors for rg8x/lmr240 coax cable| Impedance: 50 Ohm | Operating frequency: 0-1000MHz..
  • [Low Loss ] - The attenuates signal of this bnc crimp connector is less than 0.1db. at 500MHZ VSWR< 1.15. It can be combined with lmr240/rg8x coaxial....
  • [Well Made] - This lmr240 bnc male connector is made of brass gold-plated pins and Teflon insulators，which has good signal transmission....
  • [Compatibility]- This bnc male crimp connector works great for RG8X, LMR240,KMR240,4D-FB,belden9258,CNT240,Mini8 low loss coaxial cable or similar rf....
  • [Application] -BNC male connectors suitable for CB-ham radios, CB radios, two-way radios, bnc receiver antennas, antenna extension, radio scanner,....
Check Stock

N Male Connector - Times Microwave Easy Connector N Male Crimp - EZ-400-NMH-X - EZ Connector for LMR-400- Also Works with CNT-400 RFC-400 AX-400 2 Pack

  • Will work on LMR-400 , RFC-400 , CNT-400 , AX-400.
  • Voltage Rating1500V and Insertion Loss 0.05dB.
  • Includes a piece of 2:1 Shrink tube - 2inches in length.
  • MADE IN USA - times microwave N Type Connector Plug, Male Pin 50Ohm Free Hanging (In-Line) Push On- 2 pack includes two connectors.
Check Stock

MPD Digital LMR-400 Coax US Made Ham or CB Radio Jumper PL-259 Connectors Ultra Low Loss Antenna Cable 100feet

  • This is LMR400 LMR-400 - a Registered Trademark of MPD Digital Systems.
  • PL-259 UHF coax cable connectors - Connects Antennas, Receivers, Meters and Radio transmitters.
  • 100ft feet of coaxial cable USA Made LMR-400 Transmission Line Coaxial Cable with Soldered Silver Plated Connectors Teflon Dielectrics.
  • Assembled by MPD Digital - a DoD Supplier - in our GA Facility using MILSPEC Components.
  • Impedance 50 Ohms Frequency Range DC ~ 11 GHz - PL-259 Connectors are not recommended for use above 300Mhz (See N Male options).
Check Stock

MPD Digital 50 ft Ham / CB Radio Antenna Coax LMR-400 50 ohm Coaxial Cable Antenna Transmission Line PL-259 Connectors MADE IN THE USA

  • LMR400 LMR-400 is a Registered Trademark of MPD Digital Systems.
  • PL-259 UHF coax cable connectors - Connects Antennas, Receivers, Meters and Radio transmitters.
  • 50 feet of coaxial cable USA Made LMR-400 Transmission Line Coaxial Cable with Soldered Silver Plated Connectors Teflon Dielectrics.
  • Assembled by MPD Digital - a DoD Supplier - in our GA Facility using MILSPEC Components.
  • Impedance 50 Ohms Frequency Range DC ~ 11 GHz - PL-259 Connectors are not recommended for use above 300Mhz (See N Male options).
Check Stock