Categories

Best Toggle Bolt And Fastener Kit

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Toggle Anchor Bolts, New Design Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x110mm, Pack of 4

  • ❤ WHAT YOU GET --- In this kit, We have prepared 3 sizes of Toggle Bolt and 3 sizes 1/8 inch Molly Bolt Drive for you to meet different needs in your daily life, including Toggle Bolt 1/8inch: 12pcs, 3/16inch: 12pcs, 1/4inch: 12Pcs. 1/8 Inch Molly Bolt Drive: 40Pcs. In total 76Pcs. High Quality can be used for a long time..
  • ❤ APPLICATION WIDE --- Used for fixing lamps, bookshelves, hanging cabinets, sinks, curtain chutes, bookshelf chutes, cable trenches, hanging flower pots, water heaters, coat racks, etc., suitable for lighter loads..
  • ❤ REASONABLE DESIGN --- The spring is folded to connect the larger wall thickness, which is elastically anchored to the product. In any case, it can automatically spring open by its spring force..
  • ❤ THE SMOOTH SURFACE --- The use of advanced equipment to automate the production process to ensure product processing accuracy, so the product appearance is exquisite, perfect workmanship..
  • ❤ GREAT VALUE --- Great toggle bolts at a much better price than big box stores. A must have for any handyman/woman / homeowner 's tool box. Convenient re-sealable plastic case. Hollow wall drive anchors - 1/8 in SD 39mm hollow wall drive anchors, 1/8 in SD 46mm hollow wall drive anchors,1/8 in SLD 59mm hollow wall drive anchors. Y....
Check Stock

Hilitchi Molly and Toggle Bolt Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt 30Pcs 1/4 Inch

  • ✅【STRONG AND WELL MADE】Quality stainless steel anchors, rustproof, anti-corrosion eco-friendly material. Stainless steel can be used in humid environment and could last for a a long time. A brand new and excellent toggle bolt kit we offer. If not, please come to us soon, we promise to solve the problem for you..
  • ✅【HOUSEHOLD SPARE HARDWARE】3 different sizes available(1/4”, 3/16”, 1/8”) respectively 30PCS and 60PCS quantity for your choice. This pretty much takes care of any light duty anchoring that would be needed in a regular household. Use in drywall, plaster wall and tile, thin or hollow walls and other board materials. Good quality little kit. Order now and store it for future use because it will make your home repair job much easier..
  • ✅【TIME SAVER HOME TOOLS】Got small items to hang on the wall and also some others large mirrors and pictures? Buy this kit for spare tools would be great. Just move to a new place and have to rehang a lot of stuffs? from shelves to picture frames, our anchors handle this all well for you. Once they are in, they have the powerful strength to hang your items. Make your new house nice and cozy. A better life for you..
  • ✅【HOW TO APPLY THIS KIT】First, you need to drill a hole (big enough to thre....
Check Stock

HASWARE Zinc Plated Steel Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall (1/4\ x 3\

  • ★【STRONG AND WELL MADE】Quality stainless steel anchors, rustproof, anti-corrosion eco-friendly material. Stainless steel can be used in humid environment and could last for a a long time. A brand new and excellent toggle bolt kit we offer. If not, please come to us soon, we promise to solve the problem for you. 100% satisfaction. We always believe that customer first..
  • ★【HOUSEHOLD SPARE TOOLS】3 different sizes available(1/4”, 3/16”, 1/8”), each size kept in one separate compartment. This pretty much takes care of any light duty anchoring that would be needed in a regular household. Use in drywall, plaster wall and tile, thin or hollow walls and other board materials. Good quality little kit. Order now and store it for future use because it will make your home repair job much easier..
  • ★【TIME SAVER HOME TOOLS】Got small items to hang on the wall and also some others large mirrors and pictures ? Buy this kit for spare tools would be great. Just move to a new place and have to rehang a lot of stuffs ? from shelves to picture frames, our anchors handle this all well for you. Once they are in, they have the powerful strength to hang your items. Make your new house nice and cozy. A better life for you..
Check Stock

Swpeet Assorted 60 Pcs Toggle Bolt and Wing Nut Kit for Hanging Heavy Items on Drywall - 1/8 Inch, 3/16Inch, 1/4Inch

  • ✅【HIGH QUALITY】These toggle bolt and wing nut are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • ✅【WHAT YOU GET】This assortment kit includes 3 sizes. 1/4 inch (4pcs), 3/16 inch (8pcs), 1/8 inch (12pcs)..
  • ✅【UNIQUE DESIGN】There is spring in the wing nut, which can be folded into the drill hole and automatically spring open by its spring force. It can increase holding power, anti-rotation and with high stability..
  • ✅【WIDE APPLICATION】These work well on concrete walls, drywall surfaces, brick walls, sheetrock, plaster and wood. Great for hanging small pictures , heavy paintings, mirrors, clock, picture frames, towel rack and lightings..
  • ✅【PACKAGE】All toggle bolt and wing nut are nicely enclosed in a plastic case, which is easy to access, carry and store..
Check Stock

MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

Heavy Duty Toggle Latch Clamp 4Pcs 660lbs Capacity Adjustable Toggle Clamp Black Smoker Door Latch Metal Pull Latch for Machinery Automobiles Luggage Lock Clamping Processing or Assembling

  • 【BLACK TOGGLE CLAMP】Made of galvanized iron material with black finish, sturdy and durable for long-time using, stronger than most 4002 latch in....
  • 【551lbs HOLDING CAPACITY】4002 Style Toggle Latch Clamp, metal latch handle and lever fastener, ideal small pull gate latch for smoker, trailer,....
  • 【Easy to Install】 Just fix the pull latch on the gate or case with screws.
  • Even if you install it little bit away or close, you could always....
  • 【WIDE APPLICATIONS】The hasp latch perfectly fit for work holding, connecting movable parts, tensioning two sectional, cabinet, smoker, jigs, door,....
Check Stock

The Hillman Group 370039 Toggle Bolt, 1/8X2-Inch, 50-Pack

  • Durable toggle bolt great for hanging and fixing objects on hollow wall..
  • Size: 1/4x3-in (1/4 inch bolt diameter, 3 inch long). Requires a 3/4" drill bit..
  • Zinc-plated carbon steel to resist corrosion in wet environments.
  • Package: 8 pieces toggle bolts,comes with spring-action wings and instruction..
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock