Categories

Best Toggle Bolt And Screw Kit

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

T.K.Excellent Phillips Pan Head Self Tapping Screws and Ribbed Anchors Assortment Screws Kit,400Pcs

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power.
  • Plastic material expansion sleeve low cost, no rust, corrosion resistance, anti-aging, good toughness.
  • Once anchor installed, they provide a flush, clean appearance in drywall.
  • Toggle bolt's wings spreads the force over the bearing surface, comes attached to a screw, use in concrete and brick.
  • Kit includes:anchors:#6-#8,#10-#12,#12-#14.
Check Stock

T.K.Excellent Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete，brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
Check Stock

MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

DIY.TK Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete，brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
  • Kit Includes:E6,E7,E8 anchors, #6x1",#8x1-1/4",#10x1-1/2"pan head self-tapping screws（ANSI) ,and a plastic case.
  • Plastic(nylon) material anchors,no rust,corrosion resistance,anti-aging,good toughness and can be easily removed.
Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

  • Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
  • Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
  • Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making  wall anchors for shelves a reliable choice for securing heavy items to walls..
  • Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
  • no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....
Check Stock

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

The Hillman Group 370054 Toggle Bolt, 3/16X3-Inch, 50-Pack

  • 【Sizes】There are three sizes selected for you, includes: 12 pieces 1/8 inch, 8 pieces 3/16 inch, and 4 pieces 1/4 inch. 24 pieces in total. Different sizes and enough quantities can meet your different longtime using..
  • 【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
  • 【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • 【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber b....
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Toggle Anchor Bolts, New Design Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x110mm, Pack of 4

  • ❤ WHAT YOU GET --- In this kit, We have prepared 3 sizes of Toggle Bolt and 3 sizes 1/8 inch Molly Bolt Drive for you to meet different needs in your daily life, including Toggle Bolt 1/8inch: 12pcs, 3/16inch: 12pcs, 1/4inch: 12Pcs. 1/8 Inch Molly Bolt Drive: 40Pcs. In total 76Pcs. High Quality can be used for a long time..
  • ❤ APPLICATION WIDE --- Used for fixing lamps, bookshelves, hanging cabinets, sinks, curtain chutes, bookshelf chutes, cable trenches, hanging flower pots, water heaters, coat racks, etc., suitable for lighter loads..
  • ❤ REASONABLE DESIGN --- The spring is folded to connect the larger wall thickness, which is elastically anchored to the product. In any case, it can automatically spring open by its spring force..
  • ❤ THE SMOOTH SURFACE --- The use of advanced equipment to automate the production process to ensure product processing accuracy, so the product appearance is exquisite, perfect workmanship..
  • ❤ GREAT VALUE --- Great toggle bolts at a much better price than big box stores. A must have for any handyman/woman / homeowner 's tool box. Convenient re-sealable plastic case. Hollow wall drive anchors - 1/8 in SD 39mm hollow wall drive anchors, 1/8 in SD 46mm hollow wall drive anchors,1/8 in SLD 59mm hollow wall drive anchors. Y....
Check Stock