Categories

Best Tool Bit Holder

TEKPREM 1/4 Strong Magnetic Extension Bit Holder 5 Pack Hex Shank Screwdriver Bit Driver Set with Portable Case for Holding Screwdriver Bits and Screws

  • [Strong Magnet Tip to Hold Bit and Screws]: These bit holders have very strong magnet tip. The magnetic bit holder provides convenient pick-up and....
  • [60mm Long]: The bit holder length are 60mm 2.36 inch , easy to pick up and change bits..
  • [1/4 inch Screwdriver Bit Holder]:The bit holders are perfect for 1 inch screwdriver bit , accept any 1/4 inch hex style long or short shank bits..
  • [Wide Application]: A must have tool for quick change bits of electric power tools ..
  • [All in One]: 5pack bit holders, packed with plastic case, portable and handy to put in pocket..
Check Stock

Bosch HDS182-02 18-volt Brushless 1/2-Inch Compact Tough Hammer Drill/Driver with 2.0Ah Batteries, Charger and Case

  • Brushless Motor: Up to 2x the motor life, superior efficiency for longer runtime and no maintenance.
  • Advanced Electronics: Electronic motor and cell protection help prevent overheating and overloading for extended tool life and runtime.
  • Most Compact Head Length: Most compact head length in its class for easy control in tight spaces.
  • Dura shield Housing: Designed and tested to withstand multiple 10 ft. drops.
  • 4x Bit Tip Holder: Convenient on-tool bit storage for magnetic bit holder.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

SHARDEN Ratchet Screwdriver 13-in-1 Ratcheting Screwdriver Set Multi Screwdriver Tool All in One with Torx Security, Flat Head, Phillips, Hex, Square and 1/4 Nut Driver

  • ... screwdriver bits: T15/T20 Security Torx, 4mm/5mm/6mm Flathead, PH1/PH2/PH3 Philips, H4/H5 Hex, and SQ1/SQ2 Square. All the bits needed in one ratchet screwdriver set, reduce the number of tools you must carry.
  • 【Space Saver】Ratcheting screwdriver set stores 12 changeable tips in the handle with an integrated bit holder. It's convenient to screw off the end cap and switch the bits. The screw driver handle is 5.90" length, takes up very little space, fits into pocket, also suit for EDC, kitchen drawer, tool belt, tool box or backpack.
  • 【Humanized Design】Our screw driversets set has been professionally designed to maximize your repair capabilities. Cushion grip bi-material handle provides superb comfort, slip resistant and maximum torque. Magnetic bit holder ensures speedy and secure bit changes while the 1/4 bit holder applies to standard 1/4" bits.
  • 【Durability & Reliability】All bits are quality constructed with CRV Steel for longevity and durability. This screw driver set is covered by SHARDEN's lifetime warranty and 30 days money-back. If you have any issues, please don't hesitate to contact us, we will do our best to help every customer.
Check Stock

Drill Bit Extension Set Threaded Tool Power Drill Accessory Drill Extension Drill Set Tight Fit Tools 00120

  • Magnetic bit holders with universal 1/4” hex shank has built-in strong magnetism to better stabilize the drill bit, and will not drop the drill bit. The quick release design makes your life and work more efficient, in one step, convenient and fast.The location of the magnetic force:The connection between the extension rod and the bit. (The magnetic force cannot be transmitted, and the bit head cannot be made magnetic!).
  • Bit extension for impact driver is made of stable and strong chrome vanadium steel with excellent concentricity. The beautiful red coating can provide secondary protection to the metal, which is more durable and more protective..
  • In order to meet the needs of various environments, this bit holder tool kit combines three different lengths, namely: 2 inch/60mm, 4 inch/100mm, 6 inch/150mm. The three lengths are highly versatile and easy to replace..
  • Drill bit extender suitable for pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and all 1/4-Inch drive bits tool. It is very suitable for working in some places that need to extend the head. Whether it is life or work, there will always be some narrow or difficult to operate environments. At this time, you can only use 3 lengths of magnetic extension drill rods....
Check Stock

Power Tool Organizer 4 Layers Garage Tool Organizers and Storage，Drill Holder Wall Mount Storage Rack for Cordless Drill Heavy Duty Tool shelf with Screwdriver Holder/Pliers Holder/Hammer Holder

  • 【Four-tier High-capacity Storage】This power tool organizer uses the latest four-tier high-capacity design. The bottom layer can store 4 cordless drills, the upper three layers can store other heavy tools or various small tools, and a hammer holder, pliers holder and screwdriver holder are added to the side..
  • 【Perfect Help In The Garage】With this power tool holder wall mount , we can make the most of wasted wall space and save time searching for tools. Floating toolbox organizer and storage for garages, homes, workshops, sheds, backyard shops and more..
  • 【Strong Weight Capacity】The tool storage for garage organization is made of thickened heavy-duty steel metal for greater weight capacity and durability, while equipped with hexagonal Expansion Bolts for greater load bearing, never again worry about the shelf breaking or the 4 layers garage tool organizers and storage falling from the wall up and down..
  • 【Easy Installation】The garage storage shelves are removable design, refer to the installation manual, you can assemble a perfect cordless drill rack and tool shelf in just a few minutes. The accessories include two sets of fixing screws, one set is 4 expansion anchors, 4 screws (use 8mm drill bit), a set is 4 hexagonal expansion bolts (use 1....
Check Stock

Bosch Bare-Tool PS21BN 12-Volt Max Lithium- Ion 2-Speed Pocket Driver with Exact-Fit L-BOXX Tool Insert Tray

  • Compact and Lightweight-Shortest height and head length along with lightest weight make this tool great for overhead/tight area work.
  • 2 Speeds (1st-0-350 RPM / 2nd-0-1,300 RPM)-Up to 2X Faster driving and drilling than competition.
  • Universal Bit Holder-Only universal bit holder in its class which clamps on all common bits (C6+E6).
  • Custom Exact-Fit Tool Inlays-Custom inserts that hold individual tools in place with room underneath to store other tool accessories.
Check Stock

Magnetic Pivot Drill Bit Holder 2-Pcs 1/4 Quick Release Hex Pivoting Bit Holder with Ring Flexible Magnetic Screwdriver Bit Holder Magnetic Screwgun Bit Tip Holder

  • HIGH-HARDNESS MATERIAL: The magnetic pivot drill bit holder is made of high-hardness chrome vanadium steel, which can withstand the high torque output....
  • 2 WAYS TO WORK: Pull the metal ring to switch to linear mode for sleeve extension, the linear length is 3.5 inches. The 20-degree pivot mode allows....
  • MULTI-MAGNETIC DESIGN: There are magnetic parts inside the pivoting bit tip holder, you can easily fix and remove the bits. The bracket is suitable....
  • 1/4" HEX SHANK: The quick change /release bit holder perfectly matches any 1/4" hex shank screwdriver bit. The perfect tool for fixing screws..
  • CUSTOMER SATISFACTION: The drill bit extension holder is delivered by Amazon and arrives safely and quickly. We will provide up to 90 days of....
Check Stock

GETUHAND Palm Wrench,15 In 1 Universal Wrench Round Shape Metric and SAE (Red)

  • Palm-Sized Universal Grip Wrench with 7 Universal Spline Socket in 1and 1/4“bit holder.
  • Bit tip holder is magnetic so screws won't fall off.
  • Splined sockets work with standard hex, Torx, square head fasteners as well as cup hooks and more(spline ,6pt bolt, 12pt bolt, torx, square, damaged).
  • Cr-Mo steel for strength 、durability and Bit holder design.
  • This Round Wrench packs a lot of function into a small space - for hard-to-get fasteners, storaged with a case, is a small and beautiful tool gift.
Check Stock

Smith's 50596 Standard Precision Knife Sharpening System

  • Wrench and bit holder tool for easy disassembly and assembly-6 Tool Bits Included.
  • Blade holder secures mechanical blade for precise sharpening. Magnetic strip to hold small broad head pieces.
  • Broadhead mount safely holds broad head during disassembly and assembly.
  • Includes Plastic storage container, Sliding lock, Rubber grips, Instruction guide, 6 Tool Bits.
Check Stock

Flexible Drill Bit Extension Set 17pcs,Includes 3pcs Universal Socket Adapter Set & Drill Bit Holder Extension,10pcs Screwdriver Bit Set

  • 【DIY Work Tool Set】Package included 1 Pcs bendable drill bit extension, 3pcs Universal Socket Adapter Set,3pcs Drill Bit Holder Extension, 10Pcs screwdriver bit set. This tool sets is light and compact, drawstring pocket convenient to carry outside and store. adequate to use in daily life..
  • 【Bendable Flexible Drill Extension】The ​Bendable drill bit extensioncan twisted and rotated at many different angles. It can be drilled into a small space, in a variety of gaps, rather than your hand, flexible installation work. Let our flexible drill bit extension tool help you solve more problems quickly..
  • 【Angle Drill Attachment】It is equipped with a angle drill bit extension bit, which can be connected to an electric drill, rechargeable drill or manual wrench to expand its range to inaccessible narrow places, tighten screws, nuts and more to help you get the job done quickly..
  • 【Multifunction Socket Adapter】3pcs 1/4" , 3/8.
Check Stock

Wera - 5056440001 BC Universal Rapidaptor Bit-Check, 30-Piece Set

  • Includes Rapidaptor Universal bit holder with quick-release chuck and 29 bits in compact case.
  • Rapidaptor bitholder with quick-release chuck for rapid one-handed bit changes for insert and power bits.
  • Torsion bits are designed to prevent premature wear and improved service life.
  • Durable plastic case is thinner then the biggest tool and can easily fit in a shirt pocket.
Check Stock

T Handle Bike Torque Wrench - Adjustable 3-10 Nm Includes 2, 3, 4, 5, 6 and 8mm Allen Wrenches, T25 T30 Torx - 1/4 Inch Hex Driver Torque Wrench for Home & Bikes Repair

  • ...olt tightening. The torque range of 3-10 Nm covers the vast majority of what home mechanics need..
  • 【All the Bits You Need】: With the 2, 3, 4, 5, 6 and 8mm Allen Wrenches, T25 T30 Torx, Flathead screwdriver and Phillip screwdriver, it'll cater for most common bolts on a bike. They all stored in a bespoke tool bit holder tightly. Choose the bit you need from the tool bit holder, insert the bit into the drive of the tool(with magnetic)..
  • 【Easy to Use】: Adjusting the level of torque is easy, simply rotate torque adjuster lever to desired torque setting ensuring that the numbers on the dial are aligned with the red line on the tool. Rotate the foldable handle on best angle for your palm force, to make wrenching easier..
  • 【Industrial Grade Quality】: MADE IN TAIWAN. This T-Handle torque wrench with patented advanced, manufactured and tested in our Taiwan factory to meet the highest industry standards. Made of 100% aluminum alloy, very strong and durable, it will offering a long service life..
Check Stock