Categories

Best Tool Box Inserts

3 Pcs Pick Pluck Foam Pre Cubed Foam Insert for Interlocking Cases Tool Box Foam Padding with Separated Bottom for Camera Packing Storage Board Games, 16 x 12 x 2 Inch

  • Size Information: our foam inserts for cases come with a total size of about 16 x 12 x 2 inches, the top is about 4 cm/ 1.6 inches in thickness, with 1/2 inch precut grid configuration, easy for you to pick cubes by hand, and the separated bottom base is approx. 10 mm/ 0.4 inches in thickness.
  • Quality Material: our pick and pluck foam is made of charcoal urethane foam, which is soft in texture and can provide cushion for fragile and valuable items in different directions, so that they can keep in place sturdily and get rid of jarring and sudden impacts.
  • Provide Protection: the toolbox foam inserts are ideal for keeping your fragile and important items, applicable for protecting them in transit to avoid potential impacts, suitable for protecting cameras, tools and other stuff in your suitcase.
  • Convenient to Use: these foam divider inserts adopt pre cubed design for easy adjustment, you just need to pull and pick away foam blocks to DIY the pad shape to match your product, no need for die cutting or extra complete steps.
  • Ideal Case Additions: our tool box foam comes with an easy to see grid and allows you to plan your layout easily, you can insert it into a tool box and remove foam cubes to proper shapes, no worry abou....
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

X-DREE Replacement Brass Tone 14mmx10mmx5mm Self Tapping Threaded Inserts 2Pcs(Reemplazo de tono de latón 14mmx10mmx5mm Inserciones roscadas autorroscantes 2 piezas

  • [50Pcs M3 M8 Self Tapping Thread Inserts Set]: There are 50Pcs stainless steel inner threads, including M3, M5, M6, M7, M8, M9, M10 M11 and M12, could meet your different needs in your repair work.
  • [Self Tapping Thread Inserts]: These thread inserts have the self tapping capability, which is easy to use. You can directly use the installation tool to screw it into a specific hole without pre tapping.
  • [Organzier Box for Easy Storage & Use]: Our screw repair sleeve assortment Kit is equipped with a plastic storage box, which is small in size and easy to carry. There are small compartments in the box, which allows you to sort and store thread reinforce repair tools in a more organized way. And it also makes it easier and faster for you to identify and access the screws.
  • [Sturdy Stainless Steel]: Our screw sleeve Assortment kit is made of stainless steel, which has good rust and corrosion resistance. The high quality materials make these thread inserts durable and not easy to deform, break or slip.
  • [Wide Application]: The stainless steel inner thread set could be us....
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

XINGYHENG 210pcs M3 M4 M 5 M6 M8 M10 M12 Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for soft wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard hex shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREAD INSERTS – This threaded insert tool is used exclusively to quickly drive in Hex Drive Inserts..
  • IT’S AS EASY AS 1-2-3 – Installation is easy. Simply drill a hole with a standard drill. Thread an E-Z LOK thread insert into place with this optional drive tool..
Check Stock

BEAMNOVA 3PCS 5/8\ CNC Metal Indexable Lathe Tools Sets Holder MTJNR1616H16, MWLNR1616H08, MCLNR1616H12 Blades WNMG431, CNMG431, TNMG331

  • ...ngsten steel. Number tool holder: 3Pcs (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12) Number of CNC blades: 3Pcs (WNMG431+CNMG431+TNMG331). Applicable machine tools: lathe. Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • Turning inserts exquisite workmanship, high strength, high toughness, stable and durable..
  • (1)MTJNR1616H16 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 93°. Shim: ST 1603. Pin: MCT513. Clamp: HL 1814. Clamp Screw: MCS625. Wrench: L2.0, L3.0. Matching Inserts Model Number: TNMG 331. Matching Inserts Length: 16 mm (5/8 in). Matching Inserts Thickness: 4 mm..
  • (2)MWLNR1616H08 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SW 0804. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS625. Wrench: L2.5, L3.0. Matching Inserts Model Number: WNMG 431. Matching Inserts Length: 8 mm. Matching Inserts Thickness: 4 mm..
  • (3) MCLNR1616H12 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SC 1204. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS625. Wrench: L2.5, L3. M....
Check Stock

ASZLBYM 30PCS CNMG 432 + WNMG 432 + TNMG 332 Indexable Solid Carbide Turning Insert Cutting Blade, CNC Lathe Indexable Turning Insert Blade for Roughing of Stainless Steel and Cast Iron

  • Modle：10pcs CNMG 432 + 10pcs WNMG 432 + 10pcs TNMG 332 ..
  • Material: Carbide ，Coating : PVD，For processing ：finishing of steel..
  • The inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • Carbide inserts 30 pieces in 3 box, packed in plastic containers, safe and easy to store ..
  • Metal surface treatment, good wear resistance, good chemical stability . If you need a indexable turning tool holder that matches the inserts,search for ASIN:B07TTL32HW..
Check Stock

YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing

  • Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
  • Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
  • Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
  • Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
  • Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check Stock

OSCARBIDE 3/4\Self-Lock Block SLTBN19-5 with Adjustable Blade NCIH26-3,Blade NCIH26-4,Tin Coated 5 pcs GTN-3 Carbide Inserts and 5 pcs GTN-4 Inserts Parting Grooving Cut-Off Tool Set

  • Indexable Cutting Tool Holder Set include 1 pc 3/4" SLTBN19-5 Tool Block. 1 pc NCIH26-3 adjustable blade with 5 pcs GTN-3 carbide inserts. 1 pc NCIH26-4 with 5 pcs GTN-4 Inserts and 1 pcs wrench..
  • CTN-3 carbide inserts made of carbide Grade C6,0.12" width, TiN Coated. GTN-4 carbide inserts, made of Carbide Grade C6, 0.16" width, TiN Coated.
  • Suitable for varied Grooving,Cut-off,Parting-off,Chamfering.
  • This cut-off tool kit works with tool holders that can hold 3/4" AXA lathe turning bits,Equipped carbide inserts for Semi-finishing/roughing machining of steel and stainless steel.
Check Stock

210 PCS Wire Threaded Inserts Assortment Kit, M3 M4 M5 M6 M8 M10 M12 304 Stainless Steel Wire Screw Sleeve Inserts Thread Repair Kit, Locking Type Wire Screw Sleeve Tools

  • 【210-PIECE SET】: This tool set includes 210 thread inserts in the most commonly needed metric sizes — M3 x 50pcs, M4 x 45pcs, M5 x 40pcs, M6 x 35pcs, M8 x 20pcs, M10 x 10pcs, and M12 x 10pcs — to help you deal with a wide range of fasteners..
  • 【HIGH QUALITY THRED INSERTS】: Made of 304 stainless steel material, the thread inserts have high hardness and great corrosion resistance, which are durable and non-deformable. Most importantly, they are non-toxic and pollution-free environmentally friendly products..
  • 【THREDDED DESIGN】: Our thread inserts are knurled having flat and deep thread, which are easy to fix and anti-slip effective. Besides, you will appreciate their appearance with even pitch and smooth surface without burrs..
  • 【WIDE APPLICATION】: Our thread inserts are used to provide firm and problem-free attachment for screws and bolts in home improvement and for a wide range of manufacturing including automobiles, aircraft, appliances, furniture, decoration and more..
  • 【EXQUISITE STORAGE BOX】: We want our customers to be simple and clear every time they use thread insert, so we put 7 sizes thread insert in 7 grids and each grid is marked with size label. These thread inserts kit is lightweight, very convenient to carry on..
Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
  • CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..
Check Stock

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock