Categories

Best Tool Die Making

SOLEILLUNE Battery Cable Lug Crimping Tool for AWG 10, 8, 6, 4, 2, 1 Terminals with 60Pcs 8Specs Copper Ring Cable Lugs Kit Heavy Duty Wire Terminal Crimper for Electrical Connectors

  • ...mper to make a great crimp on the cable lugs. Finally, rotate the connector 90 degrees to another direction and repeat the previous step for secondary crimping. Crimping twice is more secure..
  • 【APPLICATION AND COMPATIBLE】Compatible with copper, aluminum cable lug, non-welding, and standard electrical connection. Making a secure connection with cables, stranded conductors, electrical appliances, and other power mechanisms in harsh-duty environments..
  • 【PACKAGE CONTENTS】1 x Battery Cable Lug Crimper Tool, Boxed 60Pcs Copper Ring Terminals. 8 sizes are available in the cable lugs set which is suitable for most applications..
Check Stock

STOBOK 2pcs Picture Corner Trimmer Punch Corner Rounder Punch Corner Cutter Board Hole Puncher for Handicrafts Black

  • ROUND CORNER PUNCH: This fillet works well and cuts well. The incision is clean and completely rounded..
  • CORNER TRIMMER CUTTER : Easy to Carry: Small size and light weight will not increase your extra space and burden..
  • PHOTO TRIMMING TOOL: The round corner device with the upper die with the lower die cut out of stainless steel, cutting paper will not rough edges..
  • PUNCH CORNER TRIMMER: Humanized Design: Behind the cover, the bottom of the lid can be opened, very convenient to clean wastepaper..
  • HANDICRAFTS TRIMMING TOOL: You can present the paper corner trimming machine to your friends who like DIY making..
Check Stock

8Pcs Carbide Burr Set 1/4''(6.35mm) Shank for Metal Tungsten Carbide Double Cut Rotary Cutting Burr Set Die Grinder Bit Grinding Polishing Carving Tool

  • ✔Quantity: 8-piece carbide grinder rotary file burr tool set SA-5，SA-3，SC-3，SC-1，SD-3，SD-1，SF-5，SF-3, with box size: 140x110x25mm.
  • ✔Double-cut style has rows of cutting teeth cut in two intersecting directions, Unique tooth angle prevents chipping for the longest lasting design possible..
  • ✔Grinder drill is must-have kit for woodworkers and enthusiasts, they need to clean the welds frequently or use metal for cleaning,easy to grasp and use, safe and reliable.
  • ✔Carbide burrs sets fit most small rotary tools,die grinders,for woodworking drilling carving engraving milling porting, metalwork, tool making, model eng, cylinder head porting and deburring etc..
  • ✔Made of heat-treated tungsten carbide material, Used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials..
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • ...neral purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

General Tools 842 Precision Pencil Compass includes pencil Yellow

  • CARPENTER QUALITY – this pencil compass is a carpenter quality precision tool made of long lasting die cast and a rust resistant metal.
  • 9 INCH JAW CAPACITY – not only is this compass a robust scribing and marking tool, it has a spring tension adjustment for marking up to 9”(229mm)....
  • PIVOT SPRING HANDLE – the swivel spring handle of this compass makes this a great tool for making contours and circles.
  • SCRIBE GUIDE – is used for edge marking.
  • PENCIL INCLUDED – compass can be used with the included pencil or with a slim ballpoint pen.
Check Stock

Plustool Crimping Tool for Heat Shrink Connectors AWG22-10, Ratcheting Wire Terminal Crimper - Crimping Pliers - Electrical Crimping Tool

  • ❣【Ergonomic Handle Design】- Plustool crimper tool is designed for ergonomic cushioned handle that provides maximum comfort and reduced hand fatigue. Non-slip design ensures strong grips in any condition and provides maximum leverage, increasing comfort and making the grip self adjusting..
  • ❣【Adjustable Compression Wheel】- A good product depends on exquisite workmanship! Plustool crimping tool features a star wheel, which allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project. Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system helps to a easier operation..
  • ❣【Quality Commitment】 - Plustool products are backed by reliability and consistency, coming with quality assurance you can trust. For any reason you're not satisfied with this deal, you're covered by our 60 day NO-QUESTION-ASKED MONEY BACK..
Check Stock

Powerwerx TRIDIES Interchangeable accessory die sets for the TRIcrimp Powerpole crimping tool

  • Expand the functionality of your TRIcrimp tool with these additional die sets.
  • Easily crimp OEM-T, HF/VHF connectors, SB50/PP75 contacts, hex crimp for various coaxial cable connectors, non-insulated terminals, insulated terminals, end sleeves and more.
  • This 6 die set package contains 6 Interchangeable accessory die sets for the TRIcrimp tool listed blelow.
  • TRIcrimp die sets will not fit or work with any other brand of tool.
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ...neral purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ...neral purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ...neral purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ...neral purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • ...neral purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell M16 X 1.5 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel

  • ...neral purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock