Categories

Best Tool Holding Systems

10Pcs Machine Reamer Set,HSS H7 Straight Flute Chucking Reamer Milling Cutter 3/4/5/6/7/8/9/10/11/12mm

  • Overall length: 91.2mm / 3.59". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
  • Application: Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Accusize Industrial Tools 7/8'' H.S.S. Straight Shank Straight Flute Chucking Reamer, Flute Length 2-5/8'', Oal 10'', Right Hand, 8 Flute, 5015-0245

  • 【Specifications】- Cutting Dia.: 3/4". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
  • 【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • 【Round Shank】- Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
  • 【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
  • 【Application】- Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Drill America - DWDA/CX630 #30 x 6' High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of tool holding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to national aerospace standard 907.
Check Stock

uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 1.75mm / 0.07″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

uxcell 3.25mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 3.25mm / 0.13″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

Drill America - DWDA/CX129/32 9/32\ x 12\ High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of tool holding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to national aerospace standard 907.
Check Stock

Drill America - DWDA/CX127/64 7/64\ x 12\ High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of tool holding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to national aerospace standard 907.
Check Stock

Drill America - DWDA/CX61/8 1/8' x 6' High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of tool holding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to national aerospace standard 907.
Check Stock

Sturdy aluminum hand tool for two systems

  • Firm Aluminum Hand Tool Black for Two Systems PangBahay.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 8pcs

  • Overall length: 95mm / 3.74". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
  • Application: Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Drill America 3/16' x 6' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 6" overall length for drilling where extra length for reach is required.
Check Stock

uxcell 3mm Chucking Reamer, Tungsten Carbide Lathe Machine Reamer H7 4 Straight Flutes, 100mm Length Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal

  • Specifications: Cutting dia.: 3.4mm / 0.13".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, H13A Grade, Uncoated, 2 Cutting Edges, N123F2-0318-RO, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems.
  • Profiling - Coro Cut, Inserts Coro Cut 1-2 and 3 / Coro Cut 1-2, Profiling, Ground Insert.
Check Stock