National 99171 Redi-sleeve
- Designed to repair damaged, grooved or worn shafts.
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications.
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed.
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading.
- Easy to install with removable flange and installation tool.
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft.
Check StockNational 99353 Redi-sleeve
- Designed to repair damaged, grooved or worn shafts.
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications.
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed.
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading.
- Easy to install with removable flange and installation tool.
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft.
Check StockEuropean Style Wheel Marking Gauge, Wood Scribe Marking Tool, Woodworking Marking Scriber, Solid Stainless steel Bar For Carpenter(Double shaft)
- 【How to Use】With tightening adjustment, such marking tool uses the withdrawal tool to adjust the tightness and replace the cutter head..
- 【Stainless Steel】Stainless steel slide bar is rust-and-oil-proof, which can keep longer life for durability..
- 【Single&Double】Supporting single-shaft and double-shaft adjustment, it can meet different needs..
- 【Scale】With clear scale, the scriber supports fine adjustment distance for accurate scribing..
- 【Corrosion Resistance】Duplex stainless steel is with strong corrosion resistance, which makes such tool get higher performance..
Check Stock
Precision Screwdriver Kit, XOOL 200 in 1 Electronics Repair Tool Magnetic Driver Kit with 164 Bits, Flexible Shaft, Extension Rod for Computer, Mobile Phone, Smartphone, Game Console, PC, Tablet
- ...e phones, watches, glasses, cameras, tablets, laptops,PC, TVs and other electronic devices. The 1/4 inch bit can be applied to various scenes in life. After a complete redesign, it can provide all the tools you need, but not the tools you don't need..
- 【High Quality Material】All bits are made of high quality CR-V steel by vulcanization, it's hardness can reach over HRC62°, which is harder than the ordinary steel material and more durable, all of standard size bit undergo the rigorous quality control testing, the tip is stable and not easily stripped..
- 【Humanized Design】Ergonomic and press & push design handle, it is comfortable to hold even for the long-time use. For the bits that are often used in repairing electronic products, have 2pcs or 3pcs or 4pcs in this set, allows you to avoid damage due to repeated use need to buy a new replacement, save your money. And this precision set comes with a storage bag which is made from oxford, offering a whole protection, easier storage and carrying..
- 【Extension and Flexible Shaft】There is an adjustable extension rod and a flexible shaft for some electronics where the screws are not on the surface.You no longer need to laboriously open the screws inside the machine..
Check StockEstwing 6.75-Inch Long Precision Pick Tool with 40-Degree Angled Tip for Removing Hoses, Clips, Washers, and More, Chrome Vanadium Steel, Comfortable Grip
- 40-degree tip - 40-degree angled tip is ideal for prying free clips, breaking hose connections, removing washers, and more.
- Precision tool - mini sized hook measures 6.75-inches long and is ideal for delicate, precision tasks.
- Hardened steel - hardened chrome vanadium steel tool shaft with rust-resistant polished chrome finish.
- Knurled shaft - 3-inch long pick shaft has a knurled section for maximum control during precision tasks.
- Comfort grip - dual molded pp / tpr ergonomic handle helps prevent hand fatigue.
Check StockCompatible with VW Passat 2.0L 2005-2005 Engine Harmonic Balancer Automotive
- Designed to repair damaged, grooved or worn shafts.
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications.
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed.
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading.
- Easy to install with removable flange and installation tool.
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft.
Check Stock
Timken 710596 Axle Shaft Seal
- APPLICATION: Compatible with 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle..
- FUNCTION: This tool is necessarily if you want your vacuum locking hubs to work after replacing the axle seals since it prevents front hub vacuum leaks that would cause the 4WD not engage and covers in oil to prevent corrosion..
- EASY TO USE: This tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly..
- MATERIAL: Made of high quality steel, the surface with black oxide finish ensures great strength and durability while resisting rust and corrosion( It is normal that there are iron filings in the groove, if you mind, please buy it carefully )..
- REPLACES PART# 6695: Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier..
Check Stock
Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T
- ... to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
- Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
- OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier..
- Lifetime Warranty - This vacuum seal installer comes complete with a lifetime warranty. If the part ever fails on your 01 Excursion, 2003 F250, 99 F350, 04 F450 or 1998 F550 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part and taking advantage of our warranty..
Check Stock
Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints
- Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
- Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
- Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
- Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
- 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check StockJonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool for Water Utility Fasteners with 0.158” Inside Diameter
- TARGETED DESIGN: ONLY for use on Highfield 93180128 and 93180124 #6 barrel fasteners.
- CHECK SIZE BEFORE PURCHASING: Make sure to know your fastener size before purchasing this tool to ensure a correct fit, it works with inside diameters from 0.158” (do not try to use for other purposes as it will not work).
- SHAFT LENGTH: Length of the shaft when not in use is 1.05", Length of shaft when plunged is 0.77". Total length of fastener should be 2.11" and the inside depth should be 1.07".
- CONVENIENT FUNCTION: Smooth plunger and heavy-duty spring make opening quick and easy plus each tool is serialized for added protection..
- HIGH DURABILITY: Made of high carbon steel for enhanced durability and tamper-resistance.
Check StockRZR Clutch Cover Removal Tool kemimoto RZR Removal Tool kit with Reversible Socket Compatible with Polaris RZR XP 1000/ XP Turbo RS1 Ranger XP 1000
- 【Fitment】-Clutch removal tool only Compatible with 2016 2017 2018 2019 2020 Polaris RZR/RZR-4 XP Turbo & RS1, 2018 Polaris Ranger XP 1000 & 2019....
- 【 Flexible shaft】-RZR removal tool with flexible shaft and no-slip grip,which can be used within 90 degree bending range. The clutch cover removal....
- 【Reversible】-kemimoto RZR clutch cover removal tool with a reversible socket that fits 8 mm clutch cover screw heads and 1/4" hose clamp. The....
- 【Comfortable to use】-This clutch removal tool handle is designed according to ergonomic principles. Ensure the comfort of your hands during the....
- 【Durable】-Removal tool of RZR is made of aluminum alloy, which is lighter and will not rust compared to other tools made of steel, and can be used....
Check Stock
AB Earth Cuboid 8 in 1 Aluminum Pool Cue Tip Repair Tool
- The AB EARTH Cuboid 8 in 1 tip tool is a go-to tool since you can shape, Trim, scuff, pick your tip and clean the ferrule all from this one tool. Will fit tips from 8.5mm up to 14mm. The AB EARTH Cuboid tip tool is the ultimate multi-function tip maintenance tool for serious Pool players..
- 8 FUNCTIONAL MODULES IN ONE TOOL: 1. Trim the Tip (up to 14mm). 2. Clean The Ferrule (up to 13mm). 3. Tip Scuffer. 4. Shape The Tip. 5. Needle Cluster. 6. Tip File. 7. Radian comparison slot. 8.Tip Presser..
- HOW TO CHANGE THE TIP BY THE AB EARTH CUBOID? Remove old tips by safety by knife and cleanly slice them off with the top blade. Sand and flatten new cue tip ready for gluing to cue. Use module 1, Quickly and easily trim new and mushroomed cue tips flush with ferrule. Use module 4, Safely shave and clean cue tip flush with ferrule without damaging shaft..
- MATERIAL: The body is Aluminum and the blade is carbon steel. SIZE: 2.2 × 1.2 × 1 Inch. WEIGHT: 2.8oz. Packaged in a clear plastic box..
- And as an added bonus, It also comes with a replacement blade and wrench. Item does not come with a cue shaft..
Check Stock
VEVOR PTO Shaft, 1-3/8' PTO Drive Shaft, 6 Spline Tractor, Round Implement Ends PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 43'-61' Brush Hog PTO Shaft Black, for Finish Mower, Rotary Cutter
- Sturdy and Durable: This PTO shaft is a well-forged series4 driveline shaft with CE certification. It consists of a solid 20CrMnTi carburized steel universal joint and a Q345 steel tube inside the shield. The PTO shaft is durable and robust when working with various agricultural machinery..
- 6 Spline ＆ Round Ends: Constructed with a 6-spline tractor end and a round implement end, our brush hog PTO shaft has a standard size of 1-3/8 inches. It can match perfectly with the same size and type of implements and tractors, providing magnificent driving force for your machinery. Your machinery will be running like never before..
- Adjustable Length: Compressed Length: 43″ / 1100 mm.
- Extended Overall Length: 61″ / 1550 mm. The tiller PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes. It has 35 Hp, 26 Kw, and 460 Nm torque at 540 rpm, while at 1000 rpm features 53 Hp, 39 Kw, and 360 Nm torque. It allows two sides of the PTO drive line shaft to spin at different speeds..
- Easy Assembly＆Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for effortless direct replacement. The security chain and sturdy shield eliminate potential dangers in the transmission process..
Check Stock
