Categories

Best Tool To Cut Sheet Metal

Dirnatel Ts3 New Electric Drill Plate Cutter,Metal Nibbler Drill Attachment with Adapter, Variable Speed Swivel Head Electric Metal Cutter Shear

  • [Strong Cutting Ability] Dirnatel TS3 Metal cutter tool has a faster cutting speed than other sheet metal cutting tools, powerful than ordinary scissors and knives..
  • [Usable range]: Sheet metal nibbler With a high hardness cutting head,this nibbler attachment can handle iron sheet(0.1-1mm),steel sheet(0.1-0.8mm),copper sheet(0.2-1.2mm),aluminum sheet(0.2-1.2mm)..
  • [Easy to Use]: Metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. with an adapter handle, adapt to a variety of different electric drills..
  • [Matters need attention] The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. Do not cut with angular, special shape, welding sheet metal and non-metallic materials.If it is stuck, set the drill bit to reverse to automatically exit..
  • [After-sales service] : After purchasing Dirntel brand products, we will provide you with up to 2 years of after-sales service, if you have any questions, please contact us. Thank you very much!.
Check Stock

YON.SOU Air Cut Off Tool with 2 pcs 3-inch Die Grinder Cut-Off Wheels Pneumatic Metal Sheet Cutting Tool Heavy Duty Air Cutter Cutoff Tool

  • ⚙️ COMPLETE AIR CUT OFF TOOL SET: The air cutter tool set comes with 2pcs 3" cut off wheel, 2pcs wrenches, 1pcs 1/4" NPT air fitting and 1pcs air....
  • ⚙️ AIR-POWERED&MAX SPEED 20,000RPM: The 3 inch air cut off tool is up to 20,000 RPM, which is 15% more efficient than ordinary air cutter tools,....
  • ⚙️ WHEEL GUARD AND SAFETY SWITCH: The high speed pneumatic cut off tool is equipped with 180 degrees wheel guard which is adjustable for 360....
  • ⚙️ EASY TO USE AND PRECISE TO CONTROL: The air cut off tool kit comes with 1pcs hex wrench and 1pcs hand wrench for you to easily install or....
  • ⚙️ VARIOUS APPLICATIONS: The high speed pneumatic cutoff tool is designed to cut through sheet metal, plastic pipes, composite material, exhaust....
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

Makita Makita 451329-1 Dust Extracting Nozzle KP0800K

  • 【Suitable for Various Materials: The power shears & nibblers can cut up stainless steel, aluminum, plastic, or other metals. Max Cutting Steel....
  • Excellent Cutting Capability: The metal nibbler cuts material at 1000rpm speed without sparking, leaving a burr-free cut edge. The nibblers can be....
  • Humanized Design: The handle is ergonomically designed, the slim body provides easy gripping. Lock-on sliding switch for continuous operation. The air....
  • Complete Accessories: Our nibbler tool is equipped with a pair of replacement tool blocks, a wrench, a set of hook-type tools, two hexagon spanners,....
  • Easy to Replace & Operate: The Cutting Blade and Guide block is easily replaced with a wrench to offer the cutting performance. The sheet metal....
Check Stock

Ingersoll Rand 426 3” Reversible Cut off Tool, Lightweight with Speed Regulator Knob, Use with Ingersoll Rand 9520 and 9521 Cut-Off Wheels, 5 Cut-Off Wheels Included

  • A CUT ABOVE: The IR 426 3 Inch Reversible Cut-off Tool is a controllable, lightweight, and reversible tool designed for cutting mufflers, sheet metal, tail pipes, nuts, and bolts.
  • USE WITH: The 426 pneumatic Cut Off Tool is to be used with our 5 pack and 50 pack of cut-off wheels.
  • Part Numbers: 9520 (5 pack) and 9521 (50 pack).
  • LIGHTWEIGHT COMFORT: The air powered tool weighs only 2 lbs, so you don’t tire and can get the job done faster.
  • VERSATILITY: With the speed regulator knob you can control the tool’s speed and easily change it for different applications.
  • RELIABILITY: Every component, mechanism, and function has undergone rigorous testing to ensure the tool's long-lasting performance and dependability.
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

TAPCO 10379 Pro Cut-Off with Case

  • Cut-off tool that creates factory-quality cuts in coil stock, sheet metal, and vinyl.
  • reduces scrap and eliminates knifing damage to costly bending hinges.
  • hardened and captured tool steel cutting knives.
  • Includes a molded carrying case to protect the tool when it's not in use.
Check Stock

VEVOR Electric Metal Nibbler 625W Nibbler Metal Cutter 1000RPM High Speed Rotor 0.16in/4mm Metal Nibbler 110V w Replaced Blades Storage Case Sheet Metal Nibbler for Cutting Stainless Steel, Aluminium

  • 【Suitable for Various Materials: The power shears & nibblers can cut up stainless steel, aluminum, plastic, or other metals. Max Cutting Steel Sheet: 0.16in/4mm.
  • Max Cutting Stainless Sheet: 0.1in/2.5mm..
  • Excellent Cutting Capability: The metal nibbler cuts material at 1000rpm speed without sparking, leaving a burr-free cut edge. The nibblers can be spun 360 degrees to help you accomplish a wide range of cutting shapes..
  • Humanized Design: The handle is ergonomically designed, the slim body provides easy gripping. Lock-on sliding switch for continuous operation. The air outlet offers fast ventilation and heat dissipation..
  • Complete Accessories: Our nibbler tool is equipped with a pair of replacement tool blocks, a wrench, a set of hook-type tools, two hexagon spanners, and comes with a toolbox for easy carrying..
  • Easy to Replace & Operate: The Cutting Blade and Guide block is easily replaced with a wrench to offer the cutting performance. The sheet metal nibblers are light and portable, effortless to use..
Check Stock

YESWELDER Round Dual Sided Metal Sheet Guage & Metal Sheet Thickness Gauge 2pk Stainless Steel Wire Welding Gauge

  • Package included - 1 piece of round dual sided wire gage + 1 piece of metal sheet thickness gauge.
  • High-quality material - Made of stainless steel, it has anti-rust and anti-corrosion properties. It is durable, it will not rust in dry environment, and it is easy to store. You can use it for a long time without changing it frequently,compact and light in weight, easy to carry.
  • Useful handy tool - Using these gauges to determine the thickness of material before working in order to save time and material. Really useful handy tools.
  • Easy To Use - Simply press the teeth against the object to match the contour and then trace the shape you need.
  • saves your time to mark the precise cut, easy to read.
  • Wide application: Dual-Sided Round Wire Gauge:Gauging uncoated sheet, plate iron and steel.
  • Wire/Metal Sheet Thickness Welding Gauge:Checking metal sheet wire size before welding or workin.
Check Stock

Amazon Basics Original Locking Sheet Metal Tool, 8-inch

  • 8-inch sheet metal tool for bending, shaping, and crimping sheet metal.
  • Includes (1) 8-inch locking sheet metal tool made of high-quality alloy steel with a rust-resistant nickel-plated finish.
  • 2 parallel plate-style flat tips for firmly gripping sheet metal without bending it.
  • Screw-adjustable locking mechanism ensures ultimate locking force.
  • Classic trigger release quickly and effortlessly unlocks the tool.
  • Product dimension: 8 x 3.2 x 2.75 inches (LxWxH).
Check Stock

Amazon Basics Original Locking Sheet Metal Tool, 8-inch

  • 8-inch sheet metal tool for bending, shaping, and crimping sheet metal.
  • Includes (1) 8-inch locking sheet metal tool made of high-quality alloy steel with a rust-resistant nickel-plated finish.
  • 2 parallel plate-style flat tips for firmly gripping sheet metal without bending it.
  • Screw-adjustable locking mechanism ensures ultimate locking force.
  • Classic trigger release quickly and effortlessly unlocks the tool.
  • Product dimension: 8 x 3.2 x 2.75 inches (LxWxH).
Check Stock

160AS 360 Degree Rotating Nibbler Drill Attachment Double Head Sheet Metal Nibbler Metal Cutter Nibbler Drill Attachment

  • You can use it to make curve, straight line and circle cutting, it is helpful to make some....
  • Fitment: Very versatile, double head design lengthens the life of the tool, fits for any drill that works between 1500-3000 RPM, turns a power drill....
  • Multi-functional Use: This metal sheet nibbler can be widely used for house maintenance, car repair, HVAC vent pipe, pipes, powder coated material,....
  • Easy to use: This nibbler cutter drill attachment is a very useful tool for construction and renovation, has the perfect cut and easy to handle. It is....
  • Package includes: This nibbler comes in a nice metal case with all the parts and accessories you will need. Package contains 7pcs/set.(You can see the....
Check Stock

General Tools 196 Short Length Hand Reamer & Countersink, 3/4'

  • REMOVES BURRS: from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 3/4" inner diameter.
  • ENLARGE & COUNTERSINK HOLES: In wood, brass, plastic and other materials with little effort.
  • DURABLE: Compact ¾“ five-flute tool steel cutter makes fast work of deburring plastic, copper, iron pipe or sheet metal.
  • HANDLE: Heavy-duty, ergonomically designed handle.
  • PERFECT FOR SMALL JOBS: Tool has an overall length of 5-1/8 inches.
Check Stock