Belltech 965SP Front and Rear Street Performance Suspension Kit

  • Compatible With Honda Civic (FA/FG) 2006 2007 2008 2009 2010 2011.
  • Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 10 kg/mm (560 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | No, Reuse Factory Top Mount // Damping Levels: 32 Ways.
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock

Tenhulzen Automotive - Digital Hands Free Camber/Caster Gauge, 0.1 Degrees Accuracy, No Turn Plates Needed!

  • Measure Camber and Caster at the track or in your garage..
  • Camber measurements accurate to within 0.1 degrees..
  • Measures Caster WITHOUT the need for expensive turn plates..
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds..
Check Stock

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

  • All-In-One Tool Measures Camber, Caster, AND Toe!.
  • Patent Pending wheel stand-offs provide unparalleled accuracy..
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
  • Expensive Turn Plates Are NOT Needed for Caster Measurment..
  • Detailed, Step by Step Video Instructions..
Check Stock

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

MOSTPLUS Full Coilovers Struts Compatible with 1988-1991 Honda Civic/CRX|1990-1993 Acura Integra Shock Absorber Assembly Set of 4

  • Fitment: Compatible with Acura Integra ( all model) 1990 -1993.
  • Compatible with Honda Civic / CRX ( Only fit Rear Forks Model) 1988 -1991. 【NOTE】:....
  • Camber plates / top mounts: adjustable & pillow ball design.
  • Please check your car information before purchase..
  • Installation Included, professional installation is highly recommended.
Check Stock

Ski Patrol

  • All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex - Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
  • Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
  • Sandwich Construct - White ABS Side Wall - Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
  • STAUBER Dyna Snowboard Bindings - Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
  • Includes 8 - 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.
Check Stock

MOSTPLUS Full Coilovers Struts Compatible for Honda Prelude 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 Adjustable Height Suspension (Set of 4)

  • Application: Compatible for 1992-2001 Honda Prelude. 【NOTE】: These Coilovers Strut will "Lowering your car" and DOES NOT keep to Original Ride Height..
  • 45° Adjustable Camber plates / top mounts:Yes.
  • Please check your car information before purchase..
  • Professional installation is highly recommended.
Check Stock

Ksport Coilovers Suspension Kit CTY671-KP | Compatible with 12-17 Toyota Camry SE - Kontrol Pro Adjustable Coilovers | Lowers Vehicle & Increases Handling Shock Absorber |

  • Compatible With Toyota Corolla (E140) 2009 2010 2011 2012 2013.
  • Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 5 kg/mm (280 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways.
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock

Aloha Surf Hotel

  • All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex – Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
  • Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
  • Sandwich Construct – White ABS Side Wall – Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
  • STAUBER Dyna Snowboard Bindings – Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
  • Includes 8 – 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Falling From the Sky (Gravity Book 2)

  • All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex - Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
  • Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
  • Sandwich Construct - White ABS Side Wall - Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
  • STAUBER Dyna Snowboard Bindings - Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
  • Includes 8 - 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.
Check Stock

KAKO Adjustable Magnetic Gauge Tool,Camber Castor Strut Wheel Alignment Tool for Car/Truck Camber/Castor Strut Wheel Alignment and Tire Repair

  • Accurate Measurement Wheel Alignment-This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc..
  • Professional Tools-Professional adjustable magnetic gauge tool measures the Camber and Caster angle on the wheel hub or brake disc, suitable for automobile cars motorcycles trucks vans SUV tire repair..
  • Easy to use-it has a powerful magnet could be easily mounted on all kinds of metal surface,easy to use.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)..
  • This adjustable magnetic gauge tool also it could be used as a normal gradienter (Magnetic mount could be released),It has a simple leveling adjustment from -5 degrees to 5 degrees.The body of gauge is made of high density aluminum and precision level vial..
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completel....
Check Stock

Gear of the Day - Outdoor Daily Deals

  • All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex - Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
  • Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
  • Sandwich Construct - White ABS Side Wall - Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
  • STAUBER Dyna Snowboard Bindings - Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
  • Includes 8 - 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.
Check Stock