Categories

Best Torque Stepper Motor

Creality 3D Printer 42-40 Stepper Motor 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder Compatible with E-axis of CR-10 Series and Ender-3 Series

  • Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.)..
  • 1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase..
  • High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
  • Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
  • What You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.).
Check Stock

MINARIK MM23001C 0-90/0-180V-DC 1/4-2HP 5A AMP DC MOTOR DRIVE D506404

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional..
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length with 8mm Shaft for CNC Mill Lathe Router

  • The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router..
Check Stock

Creality 3D Printer Original Stepper Motor 42-40/1pcs and 42-34/3pcs 2 Phase 0.8A 1.8 Degree 0.4N.M for Most FDM Printer CNC Accessory Replacement 4pcs/Pack

  • 【Widly Compatible】 42-34 Stepper motor apply for 3D printer Ender 3 S1, Ender 3 S1 Plus, Ender 3 S1 Pro (like CR-10 Series Z axis or Ender-3 X/Y/Z....
  • 【Low noise motor】The Creality high quality motor with low power, uniform speed,stableperformance, low noise and no step to lose during the....
  • 【High quality stepper motor】Stepper motor with low noise and efficient heat dissipationhas the large torque and high precision without losing....
  • 【Precise rotation】With high-strength synchronous wheel andsynchronous gear, it realizes accurate constant ratio,uniform revolution and high....
  • 【What You Get】The package include 42-40 motor 1pcs and 42-34 motor 3pcs,this item does not include connecting cable.If need further please fell....
Check Stock

G-Hubble Ender 3 Dual Z Axis Upgrade Kit with Lead Screw Stepper Motor 3D Printer Accessories Parts for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Voxelab Aquila

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32....
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

100mm Length Travel Linear Stage Actuator with Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table with NEMA23 Stepper Motor for DIY CNC Router Milling Machine

  • 【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing....
  • 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm.  Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω.....
  • 【1605 Ball Screw】- Drive type: CBX1605 ball screw. Effective travel length: 100mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw....
  • 【Slide Block】- Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum....
  • 【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of....
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 8.5Nm(1203.94oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 8.5Nm(1203.94oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 4.8Nm(679.87oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 4.8Nm(679.87oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

FYSETC Ender 3 S1 3D Printer Stepper Motor 42-40 Nema 17 Ender 3 CR6 SE Extruder Motor 2 Phase 1A 1.8 Degree with 39.3in Connecting Cable Compatible with Ender 3 Pro V2 Ender 5 Pro Plus CR-10 E-axis

  • Motor Model: 42-40 Nema 17, widely work for Most 3D Printer Reprap Ender 3 CR-10. It fits for the E-axis of Crealit Ender series and the CR series,....
  • High torque -Holding torque up to 0.45Nm. Low noise, have better high speed performance..
  • Size: 42mm X 42mm X 40mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable..
  • With the stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading. The line sequence....
  • Package Includes: 1 x 42-40 Nema 17 Stepper Motor.
Check Stock

Iverntech NEMA 17 Stepper Motor with Integrated Tr8x2 2mm Lead 310mm T8 Lead Screw for 3D Printers Z Axis or CNC Machine…

  • Iverntech NEMA 17 Stepper Motor with Integrated 310mm Tr8x2 Lead Screw.
  • High torque nema 17 stepper motor, 500mN.m, 42x42x48mm, 2 phase 4 wires.
  • Come with 1 set anti backlash nut and 1M (39.37") motor wire.
  • Great replacement for 3D Printers Z Axis, CNC Milling, Small Robotics, Stage Lighting, Laser Engraving.
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ... ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle allow for highly dynamic motion. Drive current 2A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision..
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock