Categories

Best Torsion Load Cell

New! Garage Door Extension Springs - Stretch Springs - PAIR - for 7' high door (Green)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

DURA-LIFT .207 x 2\ x 23\ Torsion Garage Springs (Yellow, Left & Right Wound)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Doors (0.295x2x41). (Black/Right).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications.
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

Pneumatic Air Powered Screwdriver,8H Impact Air Torgue Screwdriver,Industrial Grade Gun Type Air Tools,with Safety Switch

  • PARAMETER: Item Type: Pnuematic Screwdriver.
  • PREMIUM QUALITY: This small screwdriver is made of high quality alloy materials, with precision manufacturing, which is wear resistant, rustproof, strong, sturdy, durable and has long service time..
  • PROFESSIONAL DESIGN: This power screwdriver adopts double hammer striking structure for strong torsion. Button type positive and negative switch to adjust the torsion, easy and convenient to use..
  • ONE HAND OPERATION: The weight of this air drill is approximately 1.25 kg / 2.8lb, and one hand operation design with safety switch for easy and safety start. Compressed air as power, energy saving, environmental protection and safe..
  • QUALITY SUPPORT: A wonderful choice for you. If you have any questions with your air screwdriver tool, please contact us, we will contact you within 24 hours and provide a complete solution..
Check Stock

Extra Heavy Duty Garage Door Pulley - 3 INCH 200LB

  • Cable and Pulley Replacement Kit for Torsion Spring Doors up to 12 Feet Tall & Extension Spring Door to 9 Feet Tall..
  • TWO PAIRS OF LONG CABLES, 1/8"x 168 inches 7x19 Strand [7 x 19(7 strands-19 wires per strand)], 3/32" x 156 inches 7x7 Strand, FUSION CUT ENDS.
  • Each pulley is 200 lb. Load rated for doors up to 400 lbs. The 3/32" cables with 7 x 7 strand has a rating of 960 pounds, The 1/8" cables with 7 x 19 strand and rated at 2000 pounds..
  • Design to work on a multitude of doors with torsion springs or extension spring setup..
  • Package included: 2 Heavy Duty Pulleys for front or rear, 2 Clevis Forks, 2 Bolts, 2 Nuts, AND 4 Cables..
Check Stock

scottchen PRO Garage Door Safety Cable for Extension Springs Galvanized Carbon Steel 8'8\ x 1/8\ 7x7 Strands - 1Pair

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

Antego Set of 2 215/60-8 18.5x8.50-8 5 hole Galvanized Trailer tire wheel assemblies

  • Antego 18.5 x 8.50-8 (215/60-8) load range C tubeless.
  • Wheels: Size 8X7 inch ** Color: Galvanized** Bolt Configuration 5 Lug ** 4.5" Bolt Pattern.
  • Antego trailer tires are mounted on steel wheels with a 5 on 4.5 bolt pattern. These are OEM replacement tire and wheel assemblies for triton snowmobile, ATV and pontoon trailers. These also work on many popular brand of snowmobile, ATV and pontoon trailers as an 18.5 x 8.50 - 8 replacement spare trailer tire. This will fit popular brands like Triton, Floe, R & R, Karavan, Aluma, Mission, Worthington, Newmans, Sledbed and Loadmaster..
  • Antego 18.5 x 8.50 -8 tires are also known as 215/60-8. These trailer tire and wheel assemblies are 6 ply rated, load range c and are load rated at 935 lb. at 50 psi. These utility trailer tires are tubeless and have a 3 ply side wall. These snowmobile, ATV and pontoon trailer tires can be used with both torsion suspensions or leaf spring suspensions and are highway speed rated..
Check Stock

BTSHUB Torsion Bar Unloading Tool Key Removal Compatible with GM Chevy Ford Dodge Drop Forged Heavy Duty

  • 【Torsion Key Tool】7/8 inch diameter threads.
  • Large C-frame opening: to accommodate beefier torsion bars.
  • 【Forged steel construction】Torsion bar unloading tool was made for use on trucks with heavy duty chassis and a larger torsion bar.
  • 【High Performance】 Designed to hold the torsion bar while you make adjustments to your vehicle.
  • 【Advantage】Torsion key unloading tool can be positioned on the frame and the torsion bar mount.
  • 【Applications】 Torsion Bar Unloading Tool Key is Compatible with GM.
Check Stock

DURA-LIFT Heavy Duty Extension Garage Door Spring 2-Pack (120 lb.)

  • ★Application: The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs.
  • ★Must have tool: Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.
  • ★Dimensions: Garage door torsion spring winding rod are 0.47inch in outside diameter and 17.7” long. They are designed to industry standard for residential garage door use, fit most residential winding cones.
  • ★Safety first: Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods.
  • ★If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours.
Check Stock

Equipment Trailer Rim Wheel 16 in. 16X6 8 Hole Bolt Lug White Spoke Rim Only

  • Antego 18.5 x 8.50-8 (215/60-8) load range C tubeless.
  • Wheels: Size 8X7 inch ** Color: Galvanized** Bolt Configuration 5 Lug ** 4.5" Bolt Pattern.
  • Antego trailer tires are mounted on steel wheels with a 5 on 4.5 bolt pattern. These are OEM replacement tire and wheel assemblies for triton snowmobile, ATV and pontoon trailers. These also work on many popular brand of snowmobile, ATV and pontoon trailers as an 18.5 x 8.50 - 8 replacement spare trailer tire. This will fit popular brands like Triton, Floe, R & R, Karavan, Aluma, Mission, Worthington, Newmans, Sledbed and Loadmaster..
  • Antego 18.5 x 8.50 -8 tires are also known as 215/60-8. These trailer tire and wheel assemblies are 6 ply rated, load range c and are load rated at 935 lb. at 50 psi. These utility trailer tires are tubeless and have a 3 ply side wall. These snowmobile, ATV and pontoon trailer tires can be used with both torsion suspensions or leaf spring suspensions and are highway speed rated..
Check Stock

KUNTEC Torsion Bar Unloading Tool Heavy Duty Torsion Key Tool with C Frame Compatible for GMC Chevy Ford Dodge Car Truck Auto

  • FUNCTION: Torsion bar removal tool helps you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • EASY TO USE: Features larger 7/8” diameter anvil casting threads, this Torsion Bar Unloading Tool will make quick and easy work of your suspension job.
  • COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more.
  • QUALITY: This torsion bar tool is built with heavy-duty forged steel, made for use on trucks with heavy duty chassis and a larger torsion bar.
  • ATTENTION: This torsion bar unloading tool can only be used with hand wrench, do not use the impact driver. Grease the threads before using and get the front tires completely off the ground.
Check Stock

Makita E-01644 Impact XPS 60 Piece Impact Bit Set

  • Bits last up to 90X longer than standard impact bits.
  • Bits feature precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

Makita E-00913 Impact XPS #2 Phillips 2 Power Bit 5/pk

  • Precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit....
  • Lasts up to 90X longer than standard impact bits.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

Makita E-01024 Impact XPS #8 Slotted 2\ Power Bit, 5/pk

  • Precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life.
  • Lasts up to 90X longer than standard impact bits.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock