Categories

Best Total Control Hole Ball Yh80

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

  • Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

UpBright 2-Prong 12V 2A AC Adapter Compatible with Model JXA-12V2000-IP20 JXA-12V2000IP20 MW48-1201300A Yuhai YH-UA-1215 Class 2 Transformer 12VAC 1.3A 1.7A 2.0A for Christmas Tree Light Power Supply

  • Input: 110V - 117V - 120VAC 60Hz or 220V - 230V - 240VAC 50Hz Suitable Input Voltage For Your Shipping Address. Tested Units. In Great Working....
  • UpBright New 2-Hole End 12V 2A AC / AC Adapter Compatible with Model: JXA-12V2000-IP20 JXA-12V2000IP20 JXA12V2000IP20 Class 2 Transformer 12VAC 2000mA....
  • Compatible with: Model: MW48-1201300A 12V AC 1.3A 12VAC 1300mA AC-AC Adapter Class 2 Transformer.
  • Compatible with: Yuhai Electronic YH-UA-1215 YH-UA1215 YHUA-1215 YHUA1215 YH Class 2 Transformer 12VAC 1.7A AC12V 1700mA Power Supply.
Check Stock

Twidec/Output Single Phase SSR Solid State Relay 80A 3-32V DC to 24-480V AC SSR-80DA

  • Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

GDSTIME 2 Pack 80mm x 25mm Dual Ball Bearings High Speed 4500RPM 12V DC Brushless Cooling Fan

  • ...lation or airflow at a particular place. Airflow: 59 CFM.
  • 【Dual-Ball Motors】The fan features a brushless motor.
  • precision dual-ball bearings have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright.
  • 【Easy to Install】Fan size (edge to edge): 3.15 x 3.15 x 0.98 in. (80 x 80 x 25 mm).
  • Hole to Hole Distance: 2.82 x 2.82 in. (71.5 x 71.5 mm).
  • The fan can be used as both intake or exhaust fan inside your electronic enclosure or server chassis.
  • 【XH 2.54mm 2 Pin Plug】It is a 2-pin connector fan with 11.8 in. enough long power wires.
  • You can easily exchange the wires if their position is different from your old fan.
  • 【Long-lasting Cooling】Start Voltage: 3.5V.
  • (overtake 13.5V, it can also work. but it is not safe and will seriously affect the service life of the fan.).
  • 【What You Get】Includes 2pcs GDSTIME 80x80x25mm 12v dc fans, two 80mm metal fan grills, and mounting screw set.
  • 【Warranty Policy】1 Year Free Replacement Warranty and friendly customer service.
Check Stock

NIXFACE Heavy Duty ATV/UTV Three-Way Hitch ATV Attachments

  • Hitch Attachments Materials:Heavy-duty powder-coated metal construction, rust and corrosion resistance..
  • Use ball, pin pull or tow loop without changing hitches, Bolt installation, 3/4" ball hole, 5/8" clevis hole, 8-1/2" total length..
  • Vehicle Fitment:Fit for all ATVs/UTVs with factory ball-mount hitch, Can be used in the rise or drop positions- 3" drop and rise..
  • Easy to Install:No cutting,Install directly..
  • NOTES:Do not exceed the maximum tow weight of your vehicle..
Check Stock

Road Bike, Eurobike YH-XC550 Road Bike for Men, 54cm Frame Bicycle, 700C Wheels,Urban Commuter Bikes (Thin Rims)

  • YH-XC550 road bike can be used to ride comfortably in the city. The 700C wheels offer a high-speed experience of a road bike. You can easily change the gears and enjoy the speed excitement with 21 speed shifter which ensures total control in every situation..
  • The brake system consists of front and rear mechanical disc brakes, making the brake more sensitive and providing crisp stopping and steady speed control on descents..
  • Recommended rider weight: 300 lbs, recommended rider height: 5'8" ~6'2". Please check the size before you order..
  • 54cm frame is suitable for the height of more people and make riding more comfortable. The unique 3 Spoke Mag wheels design makes the bicycle more beautiful..
  • Free pedals and comfortable seat and installation tools include in packages. This bicycle arrives with 85% assembled and easy to assemble. You should install the front wheel, pedals, handlebar, seat and pump up the tires under the guidance of the assembly instructions..
Check Stock

ACETOP Speed Punch Bag, Double End Boxing Ball Leather Punching Bag, Boxing Bag with Pump Ring Locking for Gym MMA Boxing Sports Punch Bag Adult Kids Men Women (Red)

  • 【Suspended】- The double end punching bag set includes 1 boxing speed ball, 1 pump, 1 pump needle and 2 ring locking. Double end speed ball is a floor to ceiling bag which is connected on both ends to the floor and ceiling by bungee cord. Suspension type, easy to install..
  • 【Flexible】- 180cm total length, 220cm stretchable length. The upper elastic rope is 60cm and can be stretched to 72cm. The lower elastic rope is 80cm and can be stretched to 96cm. The speed ball is 20cm in diameter..
  • 【Premium Material】- The suspended boxing speed ball is made of high quality PU leather, butyl rubber inner bladder. Soft texture and good hand feeling. Superior synthetic leather and reasonable structure increase durability and functionality..
  • 【Exquisite Workmanship】- Hand-stitched seams, reinforced rope connection loops, thickened elastic rope, firm enough, hard to break. Hidden inflation hole design, effectively prevents air leakage, difficult to wear. Perfect for boxing, Sanda, fighting, home fitness, and so on..
Check Stock

uxcell 4 PCS M2/2mm 15mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Black for RC Crawler Boat

  • FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut ).
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint.
Check Stock

Beach Tennis Paddle Racket Pop Tennis Paddle Racquets Carbon Fiber Grit Surface with EVA Memory Foam Core Padel Racket with Cover Bag (Orange)

  • CARBON FIBER & STURDY STABLE - The beach tennis racket's impact resistant frame,the graphite composite surface provide high performance for high speed impact hit and response. The EVA memory foam core with new hole distribution, provides a stable better control performance, great vibration control and accurate response while the hand has a soft feel for long time play..
  • PRECISE BALL CONTROL - It is a beach tennis paddle racket with a sandy grit surface.The textured grit surface helps players to put a spin on their ball and generally have great control on the court.The specially structured surface that provides a better grip on the ball, thus giving more spin and effect.Providing the player with a unique feeling, higher speed and more stability..
  • IMPROVED TECHNOLOGY - Improved hole drilling technology reduce the damage to the frame structure.The clean cut holes provide tremendous grab on the ball and enhance bite on all hits.New hole distribution and size providing better control and feel off the face of the paddle. Provide more stable slow motion strike for beginner, indulge in the joy of beach tennis..
  • SOFT GRIP HANDLE - With soft anti-slip sweat-resistant grip handle can avoid wrist swing and paddle slip from hand during play, reduce the touch vibrati....
Check Stock

YH-XC550 Road Bike for Men 54cm Frame Bicycle 700C Wheels Aluminium Rims 21 Speed Dual Disc Brake Commuter Bikes (60mm Rims)

  • YH-XC550 road bike can be used to ride comfortably in the city. The 700C wheels offer a high-speed experience of a road bike. You can easily change the gears and enjoy the speed excitement with 21 speed shifter which ensures total control in every situation..
  • The brake system consists of front and rear mechanical disc brakes, making the brake more sensitive and providing crisp stopping and steady speed control on descents..
  • 54cm frame is suitable for the height of more people and make riding more comfortable. The unique 60mm aluminum wheels design makes the bicycle more beautiful..
  • Recommended rider weight: 330 lbs, recommended rider height: 5'8" ~6'2". Please check the size before you order..
  • Free pedals, comfortable seat and installation tools include in packages. This bicycle arrives with 85% assembled and easy to assemble. You should install the front wheel, pedals, handlebar, seat and pump up the tires under the guidance of the assembly instructions..
Check Stock

uxcell 5 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 5 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

uxcell 10 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

uxcell 10 PCS M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock