Categories

Best Tough Chain Links

ZONKIE Single-Speed Bicycle Chain 1/2 x 1/8 Inch 116 Links (Black, 1/2″ ×1/8″ 116 Links)

  • Material: The chain body is made of high-carbon steel, which is more tough than low-carbon steel. The maximum tensile force is 850 kg.
  • Size: The size of the chain is 1/2*1/8″, which is only suitable for single-speed bicycles..
  • Length: The chain has 116 links, and the total length is about 147.32cm, which can meet the length required by most single-speed bicycles..
  • Easy to install: The package contains two quick-connect buckles, which can quickly connect the chain, and the installation is convenient..
  • Surface material: The surface of the chain is wrapped by high-quality paint, which makes the chain not easy to rust, bright in color and not easy to fade..
Check Stock

PANZHENG 5 Pcs 6 Inch Mini Chainsaw Chain With 2 Pcs Replacement Saw Chain Bar Replacement Chains For 6 inch Mini Cordless Electric Portable Battery Powered Handheld Chainsaw

  • [8 PIECES] The kit includes 5PCS 6-inch chains, two replacement bars, and a file. Each chain is individually sealed packaged, it’s convenient to store. Fits for 6-Inch Mini Rechargeable Cordless Electric Chainsaw, miniature chainsaw, 6 inch mini wood cutting lithium chainsaw, original chain of rechargeable chainsaw 6 inches accessories.
  • [ NOTE ]: ONLY FOR MINI CHAINSAW. Can replace 1/4" LP Pitch .043'' Gauge 37 Drive Links 6 inch mini chainsaw chain and part of the 36/38 drive links 6 inch chainsaw chain, Cannot replace chain with less than 36 drive links or more than 38 drive links. Please confirm drive links of your original chain before purchasing.
  • [ EASY TO REPLACE ]: Use a nut driver to open the side cover, replace the original chain with one of our chains, install the side cover and tighten the nut, then use a screwdriver to turn the screw to adjust the tightness of the chain. NOTE: Please pay attention to the direction of cutter teeth.
  • [ SHARP AND STRONG CHAIN ]: Chain is deeply quenched to ensure smooth cutting and optimal lubrication. The service life of the saw chain is longer and smooth, lightweight, wear-resistant, and cuts smoothly.
  • [ GOOD SERVICE ]: We offer 60 days money back Guarantee, 2 years product warranty. If you have any question....
Check Stock

BISupply Plastic Chain Links - 0.3in x 25ft - Yellow Plastic Chain Barriers for Crowd Control and Event or Holiday Props

  • [Control Crowds]: Create a visual barricade for foot traffic and partition crowded areas with BISupply Plastic Links.
  • Bright yellow chain serves as a warning indicator to keep guests safe.
  • Decorate with the plastic Halloween chain to make your yard spooktacular.
  • [Fit Your Needs]: Plastic chain link barrier measures 5-feet (7.6m) long.
  • 1 foot (30.5cm) of chain length equals approximately 8 chain links (approx. 200 total chain links).
  • Customize chain length by cutting with a standard wire cutter.
  • [Keep People Safe]: Bright yellow chain links are easy to spot in a parking lot, in front of a door, or any other backdrop to prevent accidentally running into the plastic chain barrier and to keep traffic moving in the right direction.
  • [Quality You Can Trust]: Heavy-duty plastic link chain can withstand multiple uses and is perfect for indoor and outdoor use with endless applications and industrial uses.
  • [Package Contents]: Package includes (1) continuous length of yellow plastic linking chains measuring 25-feet.
  • Anchor posts and attachment S-hooks or carabiner clips recommended, not included.
Check Stock

FORESTER FULL-CHISEL CHAINSAW CHAIN LOOP – Non-safety chain 3/8\ | .050 Gauge | 72 Drives for 20\ BAR | Serious Cutting Blade | Fits Stihl, Oregon, and Husqvarna Chainsaws (72 Drives for 20\ Bar)

  • 3 x durable, low-kickback, low-vibration chains help reduce user fatigue for increased periods of work- For all chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 62 drive links.
  • Fits these chainsaw models with an 18" bar: Atlas 56937, Craftsman CMXGSAMCN4218, S185, ECHO CS310, Ego CS1800, CS1804, Greenworks GCS80420, Husqvarna 240, 120 Mark II.
  • Also fits: Homelite ZR43100, Masterforce 2000094ME, Poulan PR4218, Remington RM1645, Ryobi RY3818, RY40580, RY40580, Sun Joe SWJ701E, and more.
  • see product images and description. For saw sizes up to 42 cc.
  • Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
  • Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
Check Stock

Oregon S56 AdvanceCut Chainsaw Chain for 16-Inch Bar -56 Drive Links – low-kickback chain fits Makita, Echo, Husqvarna and more

  • Durable, low-kickback, low-vibration chain helps reduce user fatigue for increased periods of work- For all chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 56 drive links.
  • Fits these chainsaw models: Echo CS-400, CS-310, CS-352 and CS-370, Poulan 2150 and 3816, Makita EA4300F40B, Ryobi RY3716 and other similar models.
  • Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris.
  • Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
Check Stock

Oumers Bike Link Plier, Chain Plier Missing Link 2 in 1 Opener Closer Remover Plier/Bicycle Chain Plier Compatible with All Speed Chains Repair, Link

  • Our this missing link pliers made of high quality steel, heavy duty and durable. Ergonomic handle for comfortable use and to help apply the correct force, will last the test of time!.
  • 2-in-1 Master Link Chain Pliers - Used for quick removal of joining links, advanced tool for both open and close, chain master link remover and connector, replace SRAM, KMC, Shimano & Clark’s Chain Links - all speed chains, missing links.
  • Non-slip handle, spring design for saving effort, more easy to use, both removes and reassembles master links.
  • The master link plier with the safty pin protect from over opening, also there is a return spring keep the plier ready for work. Bottom of the chain plier handle with a clasp, close the clasp for small size for storage.
  • Perfect for the home mechanic. Compatible with 5, 6, 7, 8, 9, 10 and 11-speed derailleur chains that use a master link, allows you to effortlessly remove and replace chain links in seconds.
Check Stock

tallox 3 Pack 14' Chainsaw Chains 3/8 LP .050' 52 Drive Links fits Craftsman, Echo, Homelite, Poulan

  • Durable, low-kickback, low-vibration chain helps reduce user fatigue for increased periods of work. 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 52 drive links.
  • Fits these chainsaws with a 14-Inch bar: Craftsman S145, S1450, CMECS614, Echo CS310, Greenworks 12A Electric 20022 & 20232, 2020902ME, Homelite ZR43100, UT43104, Lynxx 14" 63287, 64715, Worx WG305.
  • Also fits: Harbor Freight Portland 14" saw, Husqvarna 240, 120i, 135, 120 Mark II, Makita UC4051A, XCU03, XCU04, Poulan PR4218, PL3314, Ryobi RY3714, RY40530, RY40503, Sun Joe SWJ699E, SWJ701E.
  • Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
Check Stock

420 Motorcycle Chain - 420 Standard Roller Chain 132 Link + Chain Breaker for 110cc 125cc Dirt Pit Bike ATV Quad Go Kart Scooter Mini Bike

  • Premium Quality: Our 420 chain is made of alloy steel, heavy duty and long durabiltiy..
  • 132 Links. The chain breaker is suitable for 420-530 chain..
  • Compatible with: Links can be removed to fit virtually any application, like 50cc 70cc 90cc 110cc 125cc ATVs and dirt bikes, Go Kart, Mini Bike, Scooter, Pit Bike, Quad, etc..
  • Package Including: 1Pcs roller chain, 1Pcs chain breaker and 5Pcs 420 chain connector links..
Check Stock

HarborCraft 1/4'' by 2 Foot Galvanized Chain

  • Versatile proof coil chain for use in a variety of applications including security, padlocks, safety tow chain, tie downs, etc..
  • Chain has a minimum break load of 5,200 pounds and is suitable as Class II and III safety tow chain.
  • Inside length of links is 1.24" inside width of links is 0.38".
  • Chain is manufactured to exacting National Association of Chain Manufacturers (NACM) specifications.
Check Stock

tallox 3 18 inch Chainsaw Chains .325 Inch Gauge .063 Inch Pitch 68 Drive Links Full Chisel fits Stihl

  • Fits these chainsaw models: Craftsman - 315.341300, 79240 & 79245 Pole Saw, 358.34550, CR2500A Cordless, 315.34131 Husqvarna - 436 LI, T536 LiXP, 536 LiXP Echo - CS-271, PPT-2620, PPT-2620H, PPF-2620 Ryobi - P540, P540A, P542, P543, P545, P546, P547, RY52003.
  • Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 40 drive links.
  • Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
  • Made in the U.S.A. - Limited Lifetime Warranty.
Check Stock

E & S Chain Saw Chain 3 Pack 20 Inch .063 Gauge 0.325 Pitch 81 Drive Links Semi Chisel 20 Inch Chainsaw Chain Fits for Stihl MS271 Chain Stihl MS290 Replacement Chain

  • SEPECFICATIONS: Fit for 20 Inch (50cm) bars, Pitch: .325", Gauge: .063" (1.6mm) Chain, Drive Link count: 81, Material: 100% Germany Steel. Ensure your....
  • APPLICATIONS: Our 20 inch 81 drive links chainsaw chain fits for Stihl MS271, MS290 chain, and is suitable for electric battery powered chainsaws and....
  • E&S ADVANTAGES：This chainsaw chain 20 inch is made of 100% German steel with high toughness and not easy to dull. It's especially designed for....
  • SEMI-CHISEL DESIGN: Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer....
  • HIGH STANDARD AND SAFTEY: E&S saw chain meets the recoil performance requirements of ANSI B175.1-2012 and CSA standard Z62.3. With exceptional....
Check Stock

4 Pack 18 Inch Chainsaw Chain 3/8 LP Pitch .050 Gauge 62 Drive Links Fits Husqvarna Echo Poulan Craftsman and more

  • Chain Specifications: 4 Pack 18 Inch Chainsaw Chain 3/8" LP Pitch .050'' Gauge 62 Drive Links..
  • Compatible Brands: Fits most chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 62 drive links. Craftsman, Echo, Homelite, Husqvarna, Kobalt, McCulloch, Poulan, Remington, etc..
  • Smooth Cutting: High toughness, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Durable, low-kickback, low-vibration chain helps reduce user fatigue and allows consistent cuts..
  • Wear Resistant: Premium industrial hard chrome outer layer and hardened rivets help reduce wear and chain adjustments. Hardened rivets provide a stronger connection between chain links, adding strength and withstanding loads..
  • Note: Please verify your parameters to ensure this chain fits your chainsaw. If you have any questions or concerns about compatible chainsaw models, please feel free to contact us..
Check Stock

HarborCraft 1/4inch by 3 Foot Stainless Steel Chain

  • Made of rust and corrosion resistant 304 stainless steel proof coil chain for use in a variety of applications including security, padlocks, safety tow chain, tie downs, etc..
  • Chain has a minimum break load of 5,200 pounds and is suitable as Class II and III safety tow chain.
  • Inside length of links is 1.24inches inside width of links is 0.38inches.
  • Chain is manufactured to exacting National Association of Chain Manufacturers (NACM) specifications.
  • 1/4inches by 3 foot long stainless steel chain.
Check Stock