Categories

Best Toxic Gas Sensor

Natural Gas Leak Detector Portable Methane Propane Combustible Natural Gas Leak Sniffer Detector with 10ft Drop Test by HABOTES (Handheld)

  • 【Portable Gas Leak Detector】Portable Natural gas sniffer and tester is used to locate exact gas leak for various combustible gas, such as methane, natural gas, propane, LPG, sewer gas, coal gas, gasoline, other flammable gases..
  • 【Super Sensitive】Made in Japan sensor.High precision gas sensor for accurate and reliable gas leak detection, fast response time less than 2 seconds. High and low sensitivity are switchable for different scenarios. Set high sensitivity to find small gas leaks. Set low sensitivity to find larger explosive gas leaks..
  • 【Simple To Use】Has an easy-to-understand interface, without complicated instructions, extremely simple to use. This portable gas detector powered by 3.7 V Li-ion Battery. With a maximum length of 16-Inch gooseneck sensor probe, you will be reaching anywhere even in hard-to-reach areas. Quickly and accurately pinpoint potential combustible gases leaked in your RV, trailer, camper, kitchen, basement, gas stove, water heater and other household devices at home..
  • 【Audible & Visual Alarm】With the sound and bargraph two alarm ways, you can get timely feedback on the results. Press MUTE key to turn on/off audible alarm in case you need. With high definition LCD display screen, which can show the data mo....
Check Stock

Seesii Gas Leak Detector,Portable Natural Gas Sniffer Alarm 0-50000PPM 100%LEL High Accuracy with Colorful LCD Display for Home, Battery Operated,Air Analyzer Locates Combustible Gas

  • .... has a backlight LCD screen, visually display the gas level , easy to read in dark. Use batteries to operate and has a low-battery indicator( 3pcs AAA batteries not included). Power-save modes,auto power off after about 10 minutes if there are no operation and measurement signal..
  • 【Flexible Probe & High-precision Sensor】11inch Split universal flexible probe, flexible and easy to deal with various measurement environments. One hand operate, easy to carry. Look for a detector that can sense even the smallest amounts of gas or else you could be unknowingly exposed to a toxic substance. Allow users with the ability to quickly and easily detect gas leaks in most hard-to-reach places around appliances..
  • 【WIDE APPLICATION】Hold this handheld detector in the area where you think there might be a leak and wait for the device to display the current gas levels.Widely used in detecting gas leak of lawnmower, your basement, RV, factory workspace, gas stove, water heater and other household devices at home to secure safety.Safe and reliable gas leak Tester..
Check Stock

Plug-in Carbon Monoxide Detector Alarm,Combination 2-in-1 Co Detector and Combustible Gas Detector,UL2034 2 Pack

  • 【2-in-1 Carbon Monoxide Alarm】This 2-in-1 gas detector contains a catalytic combustion sensor and an electrochemical sensor for sensitive sensing and high accuracy, making it one of the most important members of your protection home!!!.
  • 【LCD Display & 85 High Volume Alarm】When the combustible gas or carbon monoxide gas reaches a certain level, the gas detector will display the gas concentration value and sound an alarm, allowing you to quickly determine and make the right choice..
  • 【Power Supply】 AC90-240V or 9V rechargeable battery.
  • in the event of a power outage, the 9V rechargeable backup battery will automatically kick in to continuously protect your home..
  • 【Combustible Gas Detection Range】LPG(Methane), natural gas, coal gas, gas fuel, artificial gas, liquefied petroleum gas, liquefied natural gas etc..
  • 【Safety Certification】UL2034 and UL1484.
Check Stock

Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 1 Pack

  • Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
  • Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
  • Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
  • Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
  • Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
Check Stock

Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 4 Pack

  • Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
  • Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
  • Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
  • Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
  • Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
Check Stock

Primeswift Furnace Flame Sensor SEN01114 Replacement for American Standard Furnace SEN00337 SEN00441,2 Pack

  • [Product Features]:This flame sensor monitors the burner to detect whether or not a flame is present.If the flame sensor is defective,the furnace may....
  • [Product Functions]:The flame sensor is designed to detect whether the flame is safe or not. When the sensor does not detect the flame gas valve is....
  • [Directly Replaces]:SEN00337,SEN00441,SEN00491,SEN1114,B340888P01..
  • [Fixes Symptoms]:The furnace main gas burners ignite,the main gas burners stay on for only 8 to 10 seconds,then the burners shut right back off..
  • [Quality Warranty]:This after-market replacement part is made from durable high quality material and well-tested by manufacturer.Absolutely meet or....
Check Stock

KONDUONE 338906 Flame Sensor for Whirlpool Kenmore Maytag Dryer - Replaces WP338906, AP6008294, 14205529, 3-3377, DC32-00008A Gas Dryer Radiant Flame Sensor

  • ► Radiant Flame Sensor – The 338906 sensor is located across from the gas igniter at the dryer’s burner assembly, and senses the flame for heat allowing the gas valve to open..
  • ► Excellent Product Performance – Made from high-quality plastic and metal material and well-tested before shipping. It is designed to meet or exceed OEM specifications..
  • ► Compatibility – This WP338906 flame sensor is used for many gas clothes dryers. While this is NOT a genuine Whirlpool dryer flame sensor, it will fit and work perfectly like the original. Please check your appliance model and confirm the compatibility before ordering..
  • ► Replaces Part Number – WP338906, 338906, AP6008294, 14205529, 14210083, 3-3377, DC32-00008A, DE353, PS11741429, WP338906VP, EAP11741429, PD00002361, etc..
  • ► Warranty & Support – Truly worry-free 3-month warranty and friendly customer service. If the flame sensor fails on your dryer, feel freely to contact us..
Check Stock

Propane Natural Digital Gas Detector, Gas Leak Detection, Home Gas Alarm, Plug-in Digital Gas Alarmer, High Sensitivity LPG LNG Coal Natural Gas Leak Detection, Alarm Monitor Sensor for Home Kitchen

  • 【Suit for Multiple Gas Leak Detection】: Eksahol propane gas detectors are suitable for detecting LPG(Propane and Methane), natural gas, coal gas, gas fuel, artificial gas, liquefied petroleum gas, liquefied natural gas, etc..
  • 【Suit for Multiple Scenes】: Eksahol natural gas detectors can be used as independent family alarm equipment, and also can be used as the front sensor of the alarm system. Widely Used for Restaurant, Hospital, Hotel, Oil Factory, Garage, Gas Station, etc..
  • 【Powerful Quality & Functionality】: Natural gas detector adopting high-quality semiconductor calefaction type sensor. Gas leak detector visual and audible alarm function MCU intelligent. When the gas alarm detects a gas leak, the LED display concentration changes, and an alarm of 85 dB or more issues..
  • 【Easy to Install】: Gas leak sniffer adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas..
  • 【Warm Tips】: The system warm-up time is about 2-3 minutes. During this time period, the gas test will not work. You need to wait for the display to show 0 (the system enters the working state) before it can be tested normally..
Check Stock

TRIO PLUS UVC HEPA PCO PORTABLE AIR PURIFIER WITH AIR QUALITY SENSOR AND AUTO FUNCTION

  • CLEAN AIR QUICKLY: Cleans the air in a room up to 3,300 Sq. Ft. in 1 hour and 1,650 Sq. Ft. in 30 minutes..
  • H13 HEPA: Captures at least 99.97% of 0.3 particles, down to 0.1..
  • UVC: 2 high intensity UVC germicidal lamps for powerful sterilization..
  • PRO-CELL TECHNOLOGY: Toxic gas reduction.
  • AIR QUALITY INDICATOR: Color coded sensor tracks level of particles in the air and adjusts CFM for optimal air quality..
Check Stock

Flame King YSN-CHS20 20,000 BTU Propane Space Radiant Portable Heater Indoor* & Outdoor Great for Camping, Garage, Ice Fishing, Patio

  • SAFETY FEATURES: Built-in Safety Fuel Shutoff, Oxygen Depletion System (ODS), Fire Detection System, Safety Tilt Shutoff, and Exterior Grate Guard to protect you and your family.
  • FULL COMFORT: Built-in Auto ignition and Thermostat Dial for added heat control. Molded handle for easier transporting..
  • ADVANCED THERMOSTATIC TECHNOLOGY: The Thermostatic technology used in this heater is the most efficient in the industrial gas heating market, the versatility and reliability of the Flame King Heater have made it the heater of choice for many..
  • LONG LASTING: Lasts up to 2 hours on a single 1 lb propane cylinder (not included) at a 10,000 BTU output..
  • OXYGEN DEPLETION SYSTEM (ODS) is a low-oxygen level sensor that shuts off the gas supply to avoid the accumulation of toxic carbon monoxide in the environment..
Check Stock

Combustible Gas Detector,Gas Detector Alarm, Portable Natural Gas Tester Detector/ Propane Methane Gas Sensor, Combustible Gas Sniffer with Sound Warning, Adjustable Sensitivity and Flex Probe

  • 1.High Senstivity Quick Respon: Highly sensitive (adjustable) with a quick reaction time, you will be able to detect gas leaks within 10 seconds and prevent dangerous accidents or damages..
  • 2.Small Detector Super Sensor:A 14-inch flexible probe allows location and detection of leaks in hard-to-reach and confined spacesSix red LED's (visual) and 85dB audible alerts that increase with Gas concentration,super sensor,high sensitivity,long lifetime..
  • 3.Versatile with Combustible Gases: For the detection of flammable gases, such as gas pipelines, propane tank stations, cabin leaks, exhaust gas and fuel leaks, inspection of leaks at the access. including methane or natural gas, propane, ethane, coal gas, gas oil, gasoline, toluene, alcohol, ketone and other flammable gases.Use in onstruction projects, mines, safety check of gas appliances, oil spill home kitchen or camper and etc..
  • 4.Economical and Green:Low battery indicator,audible buzzer, the combustible gas leak detector features a low battery indicator that makes sure the instrument is charged up before next use. Also, loud audible buzzers installed in the device indicate presence and concentration of detected gas..
  • 5.Durable and Portable:Shelled in Double-Sided ABS, so portable to carry in anywhere..
Check Stock

EC Buying GY-SGP30 Gas Sensor, Air Quality Carbon Dioxide Formaldehyde Monitoring TVOC CO2 Gas Sensor Module, a Digital Multi-Pixel Gas Sensor for Indoor Air Quality Monitoring,co2 Sensor Arduino I2C

  • ♥GY-SGP30 gas sensor is a multi-pixel gas sensor for indoor air quality applications with excellent long-term stability, I2C interface with TVOC and CO2eq output signals, very small 6-pin DFN package: 2.45 x 2.45 x 0.9 mm3, Low Power: 48 mA at 1.8V, Reflow Solderable.
  • ♥ Product parameter range：① Power supply voltage VDD: ‑0.3V to +2.16V ②Power supply voltage VDDH:‑0.3V to +2.16V ③Storage temperature range: ‑40 to +125°C ④ Operating temperature range: ‑40 to +85°C ⑤ Humidity range: 10%‑95% (non-condensing).
  • ♥ Product features:1. Supply voltage 3.3V or 5V.
  • 2.IIC communication interface, 3. Imported highly sensitive SGP30 formaldehyde sensor, chip power supply voltage is 1.8V.
  • 6. The onboard 1.8V LDO chip supplies power to SGP30, so the input power can be 3.3V or 5V 7. Product pins: VCC (3.3-5V), GND, SCL, SDA (4 pins in total).
  • ♥ Product use: SGP30 module can be used in air quality detectors, formaldehyde detectors, portable gas detectors, various DIY designs, etc..
  • ♥ packing list: 1X GY-SGP30 Gas Sensor1x4 pin header.
Check Stock

WESHLGD Plug-in Type Carbon Monoxide Alarm, CO Detector Monitor with LED Digital Display and Voice Alert for Home/Kitchen -1 Pack

  • High-precision & Sensitivity Sensor - Our Co Gas Detector Use High Reliability Electrochemical Sensor, Excellent Repeatability and Stability, Sensitive Response, Rapid Alarm..
  • Easy to Install - The detector adapts excellent industrial design and leaves 2nd outlet uninterrupted for other devices. Just plug in, and ready for monitoring potential gas leak risky after warm up process..
  • LED Digital Display & Human Voice Warning - The CO detector is suitable for 24 hours gas leak monitoring, When a carbon monoxide gas leak occurs, it can quickly identify the gas and emit an alarm of 85 decibels to avoid dangerous accidents and ensure personal and property safety..
  • Alarm Standard - 50ppm - Alarm within 60 to 90 minutes.
  • UL2034 Report & Worry-Free After service - We provide a 60-day money back service. If you have any questions, feel free to contact us and get a full refund for no reason. Complies with UL2034 safety standard..
Check Stock