Categories

Best Toyota Filter

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

Oil Filter Wrench and Drain Tool Set for Toyota Lexus Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System Housings Fits Camry, RAV4, Highlander A7716F

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock

Motivx Tools Oil Filter Wrench and Drain Tool Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing both the Motivx Tools cartridge style oil filter wrench and oil filter drain tool for Toyota and Lexus vehicles..
  • Included are the Motivx Tools MX2320 oil filter wrench and MX2341 oil filter drain tool. These tools are for use on 2.0L - 5.7L engines that use the new cartridge style oil filter system. They do not work on standard spin-off style oil filters..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap and a oil filter drain tool for draining the filter housing before removing..
Check Stock

Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

PG Air Filter PA6122 | Fits 2010-22 Lexus GX460, 2009-14 Toyota FJ Cruiser, 2010-22 4Runner

  • Superior Engine Protection and Enhanced Engine Performance with up to 99% cleaner air before it flows into the car's engine..
  • High capacity air filter media for removal of harmful airborne particles such as debris while providing high airflow, non-restricting airflow, to ensure optimal engine performance which improves vehicle miles per gallon..
  • Compatible with Lexus GX460, Toyota 4Runner, FJ Cruiser. Precisely designed, engineered, and tested to meet and exceed all LEXUS, TOYOTA OE air filter requirements..
  • Premium Guard air filter are perfect fit inside the housing as per the OE design.
  • Replaces LEXUS 17813851, TOYOTA 17813851, 1781-385, 1781-YZZ13 Air Filter. Always check fitment using the Vehicle Filter.
Check Stock

FRAM Extra Guard CA10169 Replacement Engine Air Filter for Select Toyota Lexus Pontiac and Scion Models Provides Up to 12 Months or 12,000 Miles Filter Protection

  • VEHICLE APPLICATIONS: 2005-2011 Toyota Avalon (3.5L).
  • ADDITIONAL APPLICATIONS: 2007-2012 Lexus ES350 (3.5L).
  • DOUBLE MAXIMUM PROTECTION: FRAM automotive replacement engine filter provides 2x the protection compared to standard filters for up to 12,000 miles..
  • SMOOTHER HORSEPOWER PERFORMANCE: Extra Guard filter is designed to clean up exhaust so that the engine is less likely clogged by dirt. With a cleaner....
  • EXPANSIVE AIRFLOW: With a fine filter media, Extra Guard captures various debris without hampering airflow. Filter attracts dirt like a magnet so that....
Check Stock

FRAM Fresh Breeze Cabin Air Filter Replacement for Car Passenger Compartment w/ Arm and Hammer Baking Soda, Easy Install, CF10133 for Select Toyota Vehicles

  • VEHICLE APPLICATIONS: 2002-2008 Toyota Corolla 1.8L.
  • EASY INSTALL: This cabin air filter is located behind the glove box and on average will only take 15 minutes to replace the old filter with a new filter.
  • FRAM Fresh Breeze cabin air filters are the only cabin filter built with Arm & Hammer baking soda combined with carbon embedded in the filter helping to take out and odors that enter your vehicle through the ventilation system.
  • This cabin air filter will help protect your vehicles heating and air conditioning unit while allowing for the most efficient air flow into the cabin of your vehicle.
Check Stock

THIKPO 3/8 inch 64mm 14 Flute Oil Filter Wrench for 2.5-5.7L Engines with Toyota's Cartridge Style Oil Filter System, Oil Filter Cap Removal Socket Tool for Toyota, Lexus, Scion

  • This 3/8" 64mm 14 flute Toyota oil filter cap removal tool is made of premimum 6065 aluminum alloy, which make it tough enough to provide great power to rotate and replace the extremely tight original oil filter cap..
  • Surface of the oil filter wrench is treated with a high quality black anodized finish to prevent corrosion. It greatly increases friction and durability of the tool, and will highly extend the serves life..
  • This THIKPO oil filter wrench is used for vehicles that use 15620-31060, 15620-36010, 15620-36020 oil filter housing cap and 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 Toyota oil filter system, including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t..
  • The oil filter cap removal tool perfect fit most of vehicles equipped with 2.5L to 5.7L engines, such as Toyota, Lexus , Scion RAV4, Camry, Tundra, Highlander, Sienna, 4Runner, Avalon, Tacoma, IS250, RX350and others which use Toyota's cartridge style oil filter system..
  • WARRANTY from THIKPO - This is NOT a genuine part, it's a aftermarket replacement part. Please feel free to contact us if you have any questions about our products or serves, we will try the best to help you..
Check Stock

Oil Filter Cap Removal Tool Aluminum Cup Wrench 64mm 14 Flute for Toyota Lexus Scion 2.5L to 5.7L Engines with Cartridge Style Oil Filter Housings Fits Camry, RAV4, Highlander, Sienna, Tundra and More

  • This aluminum cup wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge-style engine oil filter housing, while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters.
  • This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps.
  • The surface of this oil filter wrench is treated with high quality black anodized finish to prevent corrosion.
  • There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner.
  • What you will get are 1 metal cup wrench for removing oil filter and 100% satisfaction customer care.
Check Stock

Motivx Tools Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More - 64mm 14 Flute Precision CNC Machined Aluminum Oil Filter Removal Tool

  • COMPATIBLE WITH ALL TOYOTA CARTRIDGE STYLE OIL FILTERS - The Motivx Tools 64.3mm 14 flute oil filter wrench is compatible with all Toyota and Lexus cartridge style oil filter caps from 1.8L - 5.7L engines. This includes popular models like Camry, Tundra, Tacoma, 4Runner, RAV4, Corolla, Highlander, Prius and more that use a cartridge style filter where you remove a plastic cap to expose the paper filter element inside..
  • WILL NOT BREAK TABS ON FILTER - This patent pending second generation filter removal tool features a “notch-less” design which securely grips the fluted plastic portion of the oil filter cap without engaging the tabs like older wrench designs. This prevents the tabs from cracking or breaking off which can lead to serious oil leaks..
  • FITS A WIDE RANGE OF FILTERS - Outdated filter wrenches have limited fitment and only work with filters for either 1.8L or 2.5-5.7L engines. The Motivx Tools MX2320-US wrench works with all Toyota cartridge style filters and is compatible with Toyota spin-on style oil filters 90915-YZZF1, 90915-YZZN1, 90915-10009, and 90118-WBA40. Also works with select 14 flute spin-on filters from Honda, Bosch, Mobil 1, Purolator and Hiflofiltero..
  • MADE IN USA - This oil filter wrench is proudly made in the USA....
Check Stock

Fram Filter Xg9688

  • VEHICLE APPLICATIONS: Toyota (2014-2023 SEQUOIA V8 5.7L, 2016-2023 TACOMA V6 3.5L, 2013-2014 TUNDRA V6 4.0L, 2013-2019 TUNDRA V8 4.6L, 2013-2023 TUNDRA V8 5.7L).
  • EASY INSTALLATION: A seamless DIY replacement that can be completed in minutes. Remove your old filter, replace with FRAM engine filter ensuring it is sealed around the perimeter, replace cover, and fasten.
  • This FRAM engine air filter is designed to help prevent damaging particles from entering your vehicles engine and causing increased engine wear.
  • This FRAM car air filter will protect your vehicle for up to 12 months or 12,000 miles.
Check Stock