Categories

Best Toyota Oil Filter

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock

Motivx Tools Oil Filter Wrench and Drain Tool Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing both the Motivx Tools cartridge style oil filter wrench and oil filter drain tool for Toyota and Lexus vehicles..
  • Included are the Motivx Tools MX2320 oil filter wrench and MX2341 oil filter drain tool. These tools are for use on 2.0L - 5.7L engines that use the new cartridge style oil filter system. They do not work on standard spin-off style oil filters..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap and a oil filter drain tool for draining the filter housing before removing..
Check Stock

Oil Filter Wrench and Drain Tool Set for Toyota Lexus Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System Housings Fits Camry, RAV4, Highlander A7716F

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

Oil Filter Cap Removal Tool Aluminum Cup Wrench 64mm 14 Flute for Toyota Lexus Scion 2.5L to 5.7L Engines with Cartridge Style Oil Filter Housings Fits Camry, RAV4, Highlander, Sienna, Tundra and More

  • This aluminum cup wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge-style engine oil filter housing, while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters.
  • This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps.
  • The surface of this oil filter wrench is treated with high quality black anodized finish to prevent corrosion.
  • There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner.
  • What you will get are 1 metal cup wrench for removing oil filter and 100% satisfaction customer care.
Check Stock

THIKPO 3/8 inch 64mm 14 Flute Oil Filter Wrench for 2.5-5.7L Engines with Toyota's Cartridge Style Oil Filter System, Oil Filter Cap Removal Socket Tool for Toyota, Lexus, Scion

  • This 3/8" 64mm 14 flute Toyota oil filter cap removal tool is made of premimum 6065 aluminum alloy, which make it tough enough to provide great power to rotate and replace the extremely tight original oil filter cap..
  • Surface of the oil filter wrench is treated with a high quality black anodized finish to prevent corrosion. It greatly increases friction and durability of the tool, and will highly extend the serves life..
  • This THIKPO oil filter wrench is used for vehicles that use 15620-31060, 15620-36010, 15620-36020 oil filter housing cap and 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 Toyota oil filter system, including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t..
  • The oil filter cap removal tool perfect fit most of vehicles equipped with 2.5L to 5.7L engines, such as Toyota, Lexus , Scion RAV4, Camry, Tundra, Highlander, Sienna, 4Runner, Avalon, Tacoma, IS250, RX350and others which use Toyota's cartridge style oil filter system..
  • WARRANTY from THIKPO - This is NOT a genuine part, it's a aftermarket replacement part. Please feel free to contact us if you have any questions about our products or serves, we will try the best to help you..
Check Stock

Caldera Oil Filter Wrench For 1.8Liter Toyota, Lexus, and Scion Vehicles - Compatible with 64mm Oil Filter Cartridges and Caps On Corolla, Prius, Matrix, CT200h, iQ, and XD

  • This 64mm oil filter wrench fits Toyota, Lexus, and Scion vehicles with 1.8 liter engines and cartridge style oil filters.
  • Compatible with Toyota Corolla, Prius, Prius V, Matrix, Scion iQ, xD, and the Lexus CT200h.
  • Crafted from high strength aluminum, this oil filter wrench is designed to withstand high amounts of torque when removing tough oil filter caps.
  • The 14 flute design of this oil filter tool ensures a tight no-play, non-slip grip on 64mm Toyota, Lexus, and Scion oil filter housings.
  • The 1.8 liter oil filter wrench can be used with both a 3/8 inch drive ratchet and a 27mm socket. Use 3/8 inch drive for tightening, and 27mm socket for loosening.
Check Stock

Motivx Tools Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More - 64mm 14 Flute Precision CNC Machined Aluminum Oil Filter Removal Tool

  • COMPATIBLE WITH ALL TOYOTA CARTRIDGE STYLE OIL FILTERS - The Motivx Tools 64.3mm 14 flute oil filter wrench is compatible with all Toyota and Lexus cartridge style oil filter caps from 1.8L - 5.7L engines. This includes popular models like Camry, Tundra, Tacoma, 4Runner, RAV4, Corolla, Highlander, Prius and more that use a cartridge style filter where you remove a plastic cap to expose the paper filter element inside..
  • WILL NOT BREAK TABS ON FILTER - This patent pending second generation filter removal tool features a “notch-less” design which securely grips the fluted plastic portion of the oil filter cap without engaging the tabs like older wrench designs. This prevents the tabs from cracking or breaking off which can lead to serious oil leaks..
  • FITS A WIDE RANGE OF FILTERS - Outdated filter wrenches have limited fitment and only work with filters for either 1.8L or 2.5-5.7L engines. The Motivx Tools MX2320-US wrench works with all Toyota cartridge style filters and is compatible with Toyota spin-on style oil filters 90915-YZZF1, 90915-YZZN1, 90915-10009, and 90118-WBA40. Also works with select 14 flute spin-on filters from Honda, Bosch, Mobil 1, Purolator and Hiflofiltero..
  • MADE IN USA - This oil filter wrench is proudly made in the USA....
Check Stock

Oil Filter Drain Tool Oil Filter Release Hose Tube Pipe Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with Cartridge Style Oil Filter System

  • PREMIUM QUALITY: This tool made of high quality heavy brass and include one 39 Inch PVC hose. Allows you to direct the oil into your oil disposal container, help you cut down on the mess even further. Fits Toyota Filter Housing Part# 15620-36020 & 15620-36010..
  • INSTRUCTIONS：you simply remove the drain plug of the oil filter housing and screw in the tool in the closed position, and then turn the wheel to the open the valve to let the oil drain out. When the oil finishes draining, turn the wheel again to close the valve, remove the tool, and then proceed to remove the oil filter housing as normal..
  • FEATURES ADN ADVANTAGES：changing the cartridge type Toyota oil filters is messy compared to their old spin on oil filters. After using this tool to empty the oil filter housing, the job of changing the oil filter cartridge is a lot neater ..
  • FITS THE FOLLOWING VEHICLE MODELS: Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with cartridge style oil filter system. If you are not sure whether the oil filterdrain tool will fit, please contact us before purchasing..
  • WHAT YOU'LL GET: 1x Engine Oil Drain Hose, Place order with 100% confidence, we provide 1 click refund for our valued customers in 3month. Please feel free to contact us if you have any questions and....
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • ...rovide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like structure inside the 14 flute oil filter wrench can fully fit the filter during the process of disassembling and assembling the filter to prevent slippage so that the caps can be removed easily when you unscrew the oil filter housing with extreme force, and will not damage the fragile plastic filter cartridges..
  • PRODUCT GUARANTEE: You can enjoy our first-class service with 12-MONTH Warranty an....
Check Stock

Genuine OEM Toyota New Oil Filter Housing Cap + Plug 15620-31060 15643-31050

  • 1 x Genuine Toyota Oil Filter Housing Cap Holder Part # 15620-31060.
  • 1 x Genuine Toyota Oil Filter Drain Plug Part # 15643-31050.
  • Genuine OEM Oil Filter Housing Cap Holder + Plug.
  • This Genuine part is guaranteed by the Factory Warranty.
  • Product will come with the Genuine Factory label & package.
Check Stock

ONER Car Oil Filter Cap Assembly,Fit for Toyota Corolla Prius/Prius V Matrix Lexus CT200h 1.8L Engines, Replace#15620-37010,19185631, 917-039, ENP4118,

  • 【REFERENCE OE PART NUMBER】Manufacturer Part Number: 15620-37010, 1562037010.
  • Interchange Part Number: 917-039, 19185631, ENP4118.
  • 【PREMIUM QUALITY】Oil filter cap, manufactured from high quality ABS plastic and metal materials, corrosion resistance, heat resistance, pressure resistance, wear resistance, which will built to long lasting durability and performance.
  • 【GOOD REPLACEMENT】 The oil filter cap housing perfect match for the OEM, easy to Install, The price is only a small part of the dealer..
  • 【FIT THE FOLLOWING VEHICLES】This oil filter cap fit for 2011-2016 Lexus CT200h.
  • 【BUY WITH CONFIDENCE】 We offer 12 Months warranty, true worry-free shopping experience. Every product must take inspected and tested multiple times before the shipment.
Check Stock