Categories

Best Toyota Oil Pump

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

  • ...fluid pump kit, installed on the car oil pan and perform transmission fluid refill service for the ATF filler system. Multiple adapters constructed from hardened steel for maximum strength and longevity. Black electrophoretic finish for rust and corrosion resistance. Kit is suitable for Ford, BMW, Nissan, VW, Audi, Toyota, Volvo, Porsche, Benz, Hyundai, Infiniti, Lexus and etc..
  • Thoughtful Service: We are always trying hard as we can to provide customers with better quality products and services. Help you to complete the satisfactory shopping experience and tool selection. The item will be packed well to prevent the breakage along the way. If you have any questions, please feel free to contact us. Goods purchased in this store is refundable within 30 days as long as it's intact, and we provide 12-month after-sales quality support..
Check Stock

[OEM Products] BENEDETTO Auto Service 10 PCS Oil Drain Plug gaskets/Crush washers Replacement for Toyota Drain Plug Washer Replaces# 90430-12031 Aluminum (QTY10)

  • Toyota oil drain plug gasket Part Number: 90430-12031, 9043012031, , 90430-A0006, 90430-C0005, for Dorman 095-156, 095-156CD, and 65394.
  • 90430-12031, oil drain plug gasket: Fits Lexus Scion Toyota CT200h ES350 Prius Tundra Sienna Corolla 4Runner Highlander Camry Tacoma RAV4 Scion tC xB xD Oil Drain Plug Washers..
  • Specification: Thickness: 0.07inch, Inside diameter: 0.48 inch, Outside diameter: 0.82 inch.
  • Easy to install and High-Quality Material and Performance Aluminum toyota oil drain plug gasket.
  • 90430-12031 Oil Drain Plug Gaskets is a ring-shaped part that keep the drain plug tight and free from leaks and helps to seal the drain plug and oil pan surfaces. When it's time to change your Toyota's oil and oil filter, it may also be time to replace the drain plug gasket. Prevent oil leaks with "crush" gaskets.
  • 10 Year Warranty: If these toyota oil drain plug gaskets damaged, please feel free to contact us for reship or refund..
Check Stock

EWK Oil Change Tool Set - 64mm Oil Filter Wrench, Drain Hose, Oil Funnel for Toyota, Lexus, Scion 2.0L - 5.7L Oil Filter Systems

  • 【 Convenient Set 】 Includes every tool you need to remove and refill the engine oil, the Toyota oil filter wrench for removing the oil filter housing cap, an oil filter drain hose for draining the filter housing without splatter, and a threaded-on oil funnel for refilling the engine oil..
  • 【 Wide Applications 】 The 64mm Toyota oil filter tool and funnel fits most Toyota, Lexus, and Scion vehicles. Such as RAV4, Camry, Tundra, Highlander, Sienna and more equipped with 2.0L to 5.7L / 6 & 8 cylinder engines that use Toyota's cartridge style oil filter system..
  • 【 Clean & Fast Oil Change 】 The drain tool makes the oil change process much cleaner by directing oil flow right into your oil pan to prevent splatter. To refill the oil, simply leave the whole oil bottle in the leak-proof oil funnel to completely drain while retrieving to open the next one..
  • 【 Tough and Sturdy 】 EWK 14 flutes oil filter socket for Toyota is forging from aluminum instead of casting, which provides enough power to rotate the over-tightened oil filter cap without stripping the flutes on your plastic housing..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any pro....
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • ... Wide Application: Coolant system leak checker tool set is equipped with 3 specific aluminum adapters and 10 nylon adapters , solid and durable, widely compatible for Mercedes (W123, W126, W124, W201), GM(Buick), Jeep Peugeot, Subaru, Chrysler, Acura, GM(Nova, Spectrum, Sprint), Mitsubishi, Nissan, Mazda, Toyota, Infiniti, GEO, Suzuki, Isuzu, Mercedes Honda, Toyota, Suzuki, Mitsubishi, Chrysler, Acura.
  • Package Included: 1 x Pressure testing pump with gauge 1 X Thermometer 3 X Chromed Steel Cap Adapters 10 X Anodized Cap Adapters.
Check Stock

Motivx Tools Oil Filter Wrench, Drain Tool, and Advanced Engine Oil Funnel Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing the Motivx Tools MX2320 cartridge style oil filter wrench, MX2341 oil filter drain tool, and MX2301 threaded oil funnel for Toyota and Lexus vehicles..
  • These tools only fit 2.0L to 5.7L engines that use the cartridge style oil filter system. They do NOT work on engines that use standard spin-off style oil filters. The drain tool is not compatible with some 2wd Lexus vehicles..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap, a oil filter drain tool for draining the filter housing before removing, and a hands-free Toyota threaded drain funnel for refilling the engine with oil..
  • High quality forged wrench is included for quick and and easy removal of over-tightened canister filters on many late model Toyota vehicles..
Check Stock

Fuel Pump Removal Tool, Fuel Pump Module Spanner Wrench 3/8' to 1/2' Universal Fuel Pump Lock Ring Tool, Adjustable Fuel Pump Lid Tank Cover Wrench

  • MADE OF HIGHT QUALITY STEEL:Fuel tank cover spanner adopts high quality steel forging, overall high temperature quenching treatment, high hardness, wear resistance, long life, easy to use..
  • APPLICATION: Fuel pump cover spanner is used for vehicle removal and installation of fuel pump retaining rings that attach the fuel pump module to the fuel tank. Fuel pump module spanner wrench fits most plastic retaining rings. Compatible with vehicles equipped with silent fuel tank lids..
  • GENERAL MODELS: Suitable for Mercedes-benz, for BMW,for Audi,for Volkswagen,for Toyota,for Honda,for Nissan,for Citroen and other vehicles with plastic fuel pump lock ring..
  • ADJUSTABLE: The fuel pump lid tank cover wrench fits different fuel tank lids and can be adjusted from 3/8" to 1/2" (38mm to 168mm) ratchet drive..
  • DESIGN FEATURES: The curved foot design is more suitable for the installation surface of the oil pump cover to ensure that it is not easy to slip off during operation. The four sides are rounded, and the two hands are respectively held at both ends of the beam to twist the remover, so that it is not easy to hurt the hands when operating with both hands..
Check Stock

12 Packs 90430-12031 Toyota Oil Drain Plug Gaskets Compatible with Toyota Tacoma Tundra Camry Corolla 4Runner Scion Avalon Lexus Oil Plug Gasket (12) (12) (12)

  • Part Number: Replaces 90430-1203, 9043012031 Inside diameter: 0.48 inch, Outside diameter: 0.82 inch, Thickness: 0.07inch.
  • Direct replacement: Used for oil drain plug on Scion Lexus Toyota Crush Washer Seals.
  • Trustworthy quality: The toyota oil drain plug gasket fits the oil drain plug perfectly and works well to keep the drain plug tight and free from leaks, easy to replace old broken toyota drain plug gasket with this exact copy..
  • The oil drain plug gasket located at the bottom of the oil pan helps keep oil from leaking around the oil drain plug. These gaskets are usually a single-use item and should be replaced with each oil change..
  • 20 Year Warranty: If have any quality issue, we would like to issue refund or arrange reshipment within 20 years. Excellent service and superior lexus drain plug gasket toyota.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

DNJ EK900MHD Master Engine Rebuild Kit for 1985-1995 / Toyota / 4Runner, Celica, Pickup / 2.4L / SOHC / L4 / 8V / 2366cc / 22R, 22RE, 22REC

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump, Piston Pin Bushings, Timing Cover (Front Cover).
  • FITS: 85-95 Toyota / 4Runner, Pickup, Celica 2.4L L4 SOHC Naturally Aspirated 22RE,22R,22REC.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit, w/ Heavy Duty Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Oil Filter Wrench and Drain Tool Set for Toyota Lexus Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System Housings Fits Camry, RAV4, Highlander A7716F

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...ehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hos....
Check Stock

Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock