The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

[4-Sets] 3500lbs Trailer Axle Bearing Kit - L44649/10, L68149/11 for #84 Spindle 1.719''- 10-19 (171255TB) Seal, Dust Cap, Spindle Nut, Shaft Washer, Lug Nuts

  • ✔️[Tapered Roller Bearings] - L44649 / L44610 -- Set , L68149 / L68111 -- Set.
  • ✔️[Grease Seal] - 171255TB Double Lip (10-19) --.
  • ✔️[Hardware] - Cotter Pin, Dust Cap, Shaft Washer, Spindle Nut, Lug Nuts, Tang Washer.
  • ✔️[Application] - Bearing Kit for 3500 LBS Trailer Axle, Spindle #84 , EZ-Lube Axle.
  • ✔️ [Quantity in Package] - 4 Sets of L44649/L44610 , 4 Sets of L68149/L68111, 4 Pieces of Grease Seal 171255TB (10-19), 4 Pieces of Tang Washer, 4 Pieces of Cotter Pin, 4 Pieces of Dust Cap, 4 Pieces of Spindle Nut, 4 Pieces of Shaft Washer, 20 pieces of Lug Nuts.
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

6 BOLT 3500# CAP 35-6 HUB CPT

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
Check Stock

[2 Sets] 3500lbs Trailer Axle Bearing Kit L44649/10, L68149/11 for #84 Spindle,1.719'',10-19 Seal

  • ✔️L44649 / L44610 --  2 Sets , L68149 / L68111 -- 2 Sets     .
  • ✔️Grease Seal 171255TB Double Lip (10-19)  -- 2 Pieces.
  • ✔️Bearing Kit for 3500 LBS Trailer Axle, Spindle #84 , EZ-Lube Axle.
Check Stock

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

Four 12 in. x 2 in. Electric Brake Trailer Backing Plates (2 Left 2 Right)

  • eCustomhitch Carries a Variety of Electric and Hydraulic Trailer Brake Parts.
Check Stock

2 Sets 12x2 Electric Trailer Brake Assembly for 7000 lb Axle Trailers 12 x2

  • eCustomhitch Carries a Variety of Electric and Hydraulic Trailer Brake Parts.
Check Stock

Ei Trailer Brake Assembly Electric Trailer Brakes 12 x 2 - 2 right & 2 left 5200 6000 7000 lb axles

  • eCustomhitch Carries a Variety of Electric and Hydraulic Trailer Brake Parts.
Check Stock

iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle

  • 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle..
  • 【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 16pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98'....
Check Stock

Husky 30789 Black Painted 7\ x 1.25\ Left Hand Electric Brake Assembly - (600 lb. to 2200 lb. Axle Capacity)

  • Dexter Style Self Adjusting Backing Plate.
  • eCustomhitch Carries a Variety of Electric and Hydraulic Trailer Brake Parts.
Check Stock