Categories

Best Trailer Bearing Lubricant

ARCTIC P8 – 80 mm Case Fan, Pressure-Optimised, Very quite motor, Computer, Fan Speed: 3000 RPM – Black

  • OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P8 is particularly suitable for use on heatsinks and radiators.
  • HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
  • REDESIGNED FAN BLADES: The P8 fan features completely redesigned fan blades and is optimised for high static pressure.
  • TECHNICAL DATA: Fan speed: 3000 RPM, Airflow: 23.4 CFM/39.76 m³/h (@ 3000 RPM), Noise Level: 0.3 Sone (@ 3000 RPM), Pin: 3-pin.
Check Stock

ARCTIC P12 (5 Pack) - 120 mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 1800 RPM - Black

  • OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 is particularly suitable for use on heatsinks and radiators.
  • HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
  • INNOVATIVE DESIGN: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
  • TECHNICAL DATA: Fan speed: 1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 3-pin.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Trailer Bearing Kit for #84 Spindle, Redline BK2-100

  • 2pcs l68149 / l68111 wheel bearing bore size: 34.987mm.
  • 2pcs l44649 2PCS l44610 trailer wheel bearing bore size: 26.987mm.
  • 2pcs double lip grease seals 10-19 (171255TB).
  • This trailer wheel set can be used for r-pod trailers, Rockwood premier 2576 pop-up camper trailer wheel bearings, yacht trailers.
Check Stock

SKF F4B 100-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 2-3/4\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2\ Bore, 5-1/8\ Bolt Hole Spacing, 9800lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 108-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Senston Ceramic Skateboard Bearings High Speed Double Shielded 608 RS ABEC-11 8 Pack Set for Skateboard Trucks Scooters Wheel Roller Skate

  • What you get: 8 pcs 608-2RS ceramic ball bearing in a steel box.Made of high quality carbon steel with long durability with heavy load and strong resistance for daily use impacts..
  • Standard solid bearing: All size in standard 22*8*7mm, black chrome shell never fray or stain. Pre-lubricant ceramic ball can run more smooth and longer than ordinary steel ball bearings. Nylon ball base can suffer more bump or fall..
  • Smart design for strong bearing: Double rubber shield cover in bronze, resist outside impact, prevent dust or sand and stone from breaking into bearing, damage ball inside. ABEC-11 certification made it better than any other competitors you ever seen..
  • Widely use: Not only this set of ceramic 608 2RS bearing for skateboard, it can apply widely on sports like kick scooter, roller skate and so on, but also on your life: spinner, baby stroller, hand cart, truck dolly. It’s your best option when you want to have some 608 bearings..
  • Reminder: The bearings is made with slight lubricant oil, change bearings with gloves to prevent moist from your hand for better performance..
Check Stock

LAFORMO Boat Trailer Hub with Bearing Kit - Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle…

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle.
  • Bearing Kit Specifications:Outer bearing # 44649-- 1 1/16"/Inner bearing # 68149-- 1 3/8"/Seal inside diameter 1.719"/Seal outer diameter 1.983".
  • Package Includes:2 x Hub / 2 x Inner bearing / 2 x Outer bearing / 2 x Seal.
  • Feature:The surface of the hub is galvanized..
  • These Hub are very suitable for ship trailers to withstand the harsh seawater environment..
Check Stock

SKF F4B 108-FM Ball Bearing Flange Unit, 4 Bolts, Eccentric Collar, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing Width, 5310lbf Dynamic Load Capacity

  • Cast iron flanged housing for vibration damping and structural rigidity.
  • Double-sealed, deep-groove ball bearing insert with an extended inner ring for applications with radial, thrust, and combined loads.
  • Acrylonitrile-butadiene rubber (NBR) contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Eccentric locking collar for securing the bearing onto the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 104-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/4\ Bore, 3-5/8\ Bolt Hole Spacing, 5730lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 103-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-3/16\ Bore, 3-1/4\ Bolt Hole Spacing, 4380lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 204-TF Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Seals with Flingers, Cast Iron, 2-1/4\ Bore, 5-5/8\ Bolt Hole Spacing, 11840lbf Dynamic Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock