Categories

Best Trailer Brake Installation Cost

CURT 51457 Quick Plug Electric Trailer Brake Controller Wiring Harness, Select Ram 1500, Classic, 2500, 3500, 4500, 5500

  • EASY TO INSTALL. No cutting or splicing required! This vehicle-specific wiring harness allows fast, easy, plug-and-play trailer brake controller installation. NOTE: Software in vehicle must be updated by dealership to accept an aftermarket controller.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes.
  • VEHICLE-SPECIFIC. This electrical brake controller wiring fits select model years of the Ram 1500, 1500 Classic, 2500, 3500, 4500 and 5500 (without factory integrated brake controller - ITBC).
  • VERSATILE USE. This trailer brake controller wiring kit is compatible with any CURT trailer brake controllers equipped with a quick plug connector -- proportional, inertia and time delay. It also features a 24-inch length for flexible positioning.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock

Tekonsha 8507120 Brakeman IV, Time-Delay Brake Controller For Trailers with 1-4 Axles, Black

  • TIME-DELAYED DIGITAL BRAKE CONTROLLER: Applies braking power that ramps up, or increases over a period of time, at a fixed rate. This makes the Tekonsha Brakeman IV brake controller ideal for basic, light-duty towing needs.
  • EASILY INSTALL: The Brakeman IV trailer brake controller has a Plug & Play port for easy installation. As a time-based controller with a compact design, the unit can be installed above or below the dash, in any direction, as it is within reach of the driver.
  • EASY-TO-READ INDICATOR: Digital display shows settings, real-time comprehensive diagnostics, and short circuit protection. Red light means power increase to trailer brakes. Green light means secure connection with trailer “.
  • MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The Brakeman IV will apply power to your trailer’s brakes up to the amount of power previously set.
  • VERSATILE: The Brakeman IV digital brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and more with 2, 4, 6, and 8 brakes (1-4 axles). Vehicle-specific Tekonsha Plug & Play brake controller wiring harness sold separately.
Check Stock

LINKITOM Trailer Lights Welded Mount Steel Boxes Kit w/6 inch LED Oval Tail Lights & 2 inch LED Red Round Side Lights w/ Grommet wire connectors 2 Pack

  • Trailer Light Kit: includes 2 X Welded Mount Heavy Duty Steel Boxes, 2 X 6" Oval Red LED Trailer Lights w/ Rubber Grommets and wire connector.
  • 2 X 2" Round Red LED lights w/ Rubber Grommets.
  • Steel Trailer Light Boxes: Made by 14 gauge heavy duty steel, protect the LED tailer light effectively. The steel box housing is design of excellent moisture-proof sealed and IP 67 waterproof makes it be definitely waterproof..
  • Super Bright: Led Trailer Lights has bright LED diodes with super high visibility, light up the rear or side of your vehicle or trailer in daylight, midnight, raining or fog days. Improve the drive security and avoid accidents..
  • Brake& Turn Taillight: Function as tail lights, turn/brake lights and side marker light. Fit for heavy truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc.,.
  • Simple Installation: Led trailer lights with black rubber grommet are mounted on the box. wiring them for installation to the corresponding wire on trailer. And then weld on the light box to the trailer frame..
Check Stock

Tekonsha 90885C Prodigy P2 Universal Super Intelligent High Powered Electronic Trailer Brake Control System

  • UNIVERSAL SYSTEM: Universal electronic brake control system designed to make trailer towing safer and easier.
  • FITS 1 TO 4 AXLES: Fits 1 to 4 axle trailers to deliver a signal from your vehicle's brakes to your trailer.
  • BATTERY PROTECTION: Features reverse battery protection for both vehicle and breakaway.
  • MOUNTING VERSATILITY: Numerous mounting options offer versatile installation.
  • INCLUDES 1 BRAKE SYSTEM: Includes 1 electronic brake control system for 1 to 4 axle trailers.
Check Stock

Reese Towpower CompactIQ Trailer Brake Controller, Proportional, 1 to 3 Axles

  • RELIABLE SAFETY. The Discovery electric trailer brake controller offers safe, dependable operation, increasing trailer brake pressure as you depress the vehicle brake pedal and bringing the vehicle and trailer to a smooth stop.
  • EASY TO USE. This trailer brake controller features an easy-to-read, digital display to monitor brake operation. It also has a simple, reliable design with no internal moving parts and no leveling required.
  • POWERFUL. The simple controls of the Discovery brake controller enable powerful brake operation, featuring a manual brake slider button, an adjustable power toggle and adjustable ramp time.
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 4 axles (2 to 8 brakes). Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic.
  • SIMPLE SETUP. This electric brake controller quickly plugs into your vehicle using a CURT vehicle-specific quick plug harness (sold separately). It comes with an adjustable mounting bracket and can be mounted at any angle.
Check Stock

CURT 51120 Discovery Electric Trailer Brake Controller Time-Delay black

  • RELIABLE SAFETY. The Discovery electric trailer brake controller offers safe, dependable operation, increasing trailer brake pressure as you depress the vehicle brake pedal and bringing the vehicle and trailer to a smooth stop.
  • EASY TO USE. This trailer brake controller features an easy-to-read, digital display to monitor brake operation. It also has a simple, reliable design with no internal moving parts and no leveling required.
  • POWERFUL. The simple controls of the Discovery brake controller enable powerful brake operation, featuring a manual brake slider button, an adjustable power toggle and adjustable ramp time.
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 4 axles (2 to 8 brakes). Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic.
  • SIMPLE SETUP. This electric brake controller quickly plugs into your vehicle using a CURT vehicle-specific quick plug harness (sold separately). It comes with an adjustable mounting bracket and can be mounted at any angle.
Check Stock

Mopar Dodge Ram Electronic Integrated Trailer Brake Controller OEM

  • RELIABLE SAFETY. The Venturer electric trailer brake controller offers safe, dependable operation, increasing trailer brake pressure as you depress....
  • EASY TO USE. This trailer brake controller features an easy-to-read, ramp-up LED display to monitor brake operation. It also has a simple, reliable....
  • POWERFUL. The simple controls of the Venturer brake controller enable powerful brake operation, featuring a manual brake slider button, an adjustable....
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 3 axles (2 to 6 brakes). It is also fully compatible....
  • SIMPLE SETUP. This electric brake controller quickly plugs into your vehicle using a CURT vehicle-specific quick plug harness (sold separately). It....
Check Stock

2 Pcs 7\ Oval LED Trailer Tail Lights Surface Mount 10 LED Turn Signal Brake Lights Stop Light Side Light for RV Trucks Camper SUV

  • ...ght for truck car can be used as tail light, turn signal, stop light, side marker light, clearance light, rear light. Ideal for most 12V vehicles and devices such as trucks, trailers, bus, RV, pickup, tractors, semi-trailer, boat trailer, horse trailer, travel trailer, dump truck, special vehicle, etc..
  • ☀️Simple Installation: Black Wire - ground, Red wire - high brightness for brake/stop light, Blue wire - low brightness for tail/running light. Do not plug and play, this tail light is hard wired and needs to be installed with screws..
  • ☀️What You Will Get: 2 Pcs trailer tail brake light included. If you have any questions about our trailer tail light, please contact our friendly customer service representatives, we will be glad to address any questions or concerns promptly..
Check Stock

OCPTY Trailer Hub Brake Drum 10 x 2-1/4 Wheel Bearing Kits For 1-1/16 Outer 1-3/8 Inner 5 Bolt Lug For 3,500 lb. Axles Tapered Spindle Grease Seal

  • This hub bearing is meticulously manufactured and easy-installation designed, which can bring you a convenient and fantastic using experience.
  • Black 10 x 2-1/4 trailer brake drum kit. Bolt pattern is 5 on 4.5.
  • 1 pack Trailer Brake Drum Hub kit For 1 year after-sale warranty.
  • Complete assembly with hub, bearings, seal, cap, Lug Nuts and cotter pin.
Check Stock

CURT 51110 Venturer Electric Trailer Brake Controller Time-Delay Black

  • RELIABLE SAFETY. The Venturer electric trailer brake controller offers safe, dependable operation, increasing trailer brake pressure as you depress the vehicle brake pedal and bringing the vehicle and trailer to a smooth stop.Fit Type: Universal Fit.
  • EASY TO USE. This trailer brake controller features an easy-to-read, ramp-up LED display to monitor brake operation. It also has a simple, reliable design with no internal moving parts and no leveling required.
  • POWERFUL. The simple controls of the Venturer brake controller enable powerful brake operation, featuring a manual brake slider button, an adjustable power toggle and adjustable ramp time.
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 3 axles (2 to 6 brakes). It is also fully compatible with cruise control, anti-lock brakes, low-voltage systems and PWM systems.
  • SIMPLE SETUP. This electric brake controller quickly plugs into your vehicle using a CURT vehicle-specific quick plug harness (sold separately). It comes with an adjustable mounting bracket and can be mounted at any angle.
Check Stock

Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty

  • ...h Visibility LEDs: Each oval led tail lights uses 24 high quality SMD LEDs to emit ultra-bright red light, offering two brightness levels. High for brake lights and low for Running Light. Individual diodes feature a circular pearl-like reflector for clearer light, improved visibility and a safer night for you..
  • Easy Installation: Standard 6" size. Black wire for Negative, White wire for Brake Light and Red wire for Tail/Running Light. Mark and drill holes according to the size of the base provided, and fix the trailer lighting with screws after connecting the wires. The mounting hole size is: 7” (175 mm) x 2.7” (68 mm).
  • Premium Material: This oval trailer lights is made of high-quality ABS shell and PC lens to ensure long-lasting durability. Compared with other household rubber installations, we use screws to install more sturdy, effectively protecting the entire led trailer tail lights. Anti-vibration and dust-proof not easy to fall off..
  • Waterproof & Durable: IP67 waterproof trailer tail light, capable to withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles..
  • Multi Functional Trailer Light: 6 led trailer brake lights Suitable for most vehicles eq....
Check Stock

SUZCO 25 Foot 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit 4-Way Plug 4 Pin 21 Male & 4 Female Extension Connector & Wishbone-Style with 18 Gauge White Ground Wire with SAE J1128

  • ...de of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. The 4 flat trailer wire is color-coded and bonded wire to easily splice into your trailer's wiring system, no need for splicing wires. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【EXTENSION INCLUDING】This 25foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an COPPER trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion resistant terminal..
  • 【4-WAY CONNECTORS & FITMENT】You can install the trailer wire so quickly and easily through the 4-way connectors. 4-pin connectors are available....
Check Stock

EPARTS Universal Smoke Lens 12-LED 2\ Trailer Truck Hitch Towing Receiver Cover Brake Light Lamp

  • Fits: Universal Fit All SUV Pick-up Truck / 2" Inch Receiver.
  • PACKAGE INCLUDES: 1x Trailer Hitch Brake Light Installation instructions might not be included in this package.
  • Made From High Quality ABS Plastic 2" Tube Diameter.
  • 12-LED Trailer Brake Light W/ Standard 4-Pin.
  • Dimension: 3.15(H) x 3.15"(W) x 4.06"(L).
Check Stock