Best Trailer Hitch Brake Light

Hitch Cover LED Brake Light Towing Hitch Insert

Bright 12 L.E.D. Brake Light Hitch Insert. Protects your hitch receiver from rust, mud and corrosion.
Extra Long 12" Flat Style 4 Prong Standard Plug. 16 AWG x 2C x 10″ wire.
Built-in brake light provides added safety when your hitch is not in use. Great for Cars, Trucks, RVs, and trailers.
Overall LED Light Dims: 3” x 3”. 12 bright LED lights last much longer than regular bulbs.
Foam pad 1/2" Thick Gasket prevents rattle and ensures a snug fit. Htich Pin Included. Fits all 2 in. trailer hitch receivers.

Check Stock

Xotic Tech Smoked Lens Trailer Hitch Cover w/Trailer Adapter Hitch Pin Red Square Brake Tail Light Compatible with Truck SUV 2'' Towing Hitch Receiver, Pure Red 15-SMD (Size:3.25" x 4.33")

...brake light function, provides the optimal balance of light output so that drivers behind you can see you and helps prevent 98% of accident..
【Wide Compatibility】The tow hitch mounted LED brake light can fit standard 2" tralier hitch receiver with a standard 4-pin trailer adapter for the LED brake light to power. If it does not, you will have to purchase a 7-pin to 4-pin adapter..
【Easy Installation】Specially Upgraded 4-Pin adapter with tail light and brighter brake light modes,much longer wiring,make it easy to install. Comes with a hitch pin with lock and foam lining to ensure a snug fit.
【Features】Special IC built in to ensure the tow hitch mounted LED tail/brake light doesn't flash when only your turn signals are on. If both your brake lights and turn signal lights are active, the hitch mount LED brake light will flash along with your turn signals to add another turning/merging blinker..

Check Stock

Tonsya 3-in-1 Smoked Lens Universal LED Hauling 2' Receiver Compatible with Truck SUV RV Trailer Rear Bumper Driving lamp Brake Tail Reverse Tow Hitch Cover Light

FITMENT: Compatible with Truck SUV Trailer RV..
function : Comes with four way connector that provides running light, brake light and reverse light functions.Universal fit all pickup, trucks, SUV, Jeep with Class III 2" x 2" hitch receiver..
Installation: Plug-and-play wire harness that requires a standard 4 Way Flat Plug for brake lights only. To use the reverse LED light function you need to splice the white wire into your car's reverse light bulb's positive wire. (Use Notes: The trailer hitch mounted LED tail brake light will not blink while your turn signals are exclusively in use. However, it will blink if both your brake lights and your turn signal lights are active)..
Sealed and Waterproof: ABS plastic housing processed with ultrasonic treatment,anti-scratch, no faded with long-time exposure and can adapt to all kind of extreme weather,no moisture inside after a heavy rain or car wash..
Package Include: 1 x brake light..If you have any questions about our products, please feel free to contact us by email.Waterproof IP65, shockproof, dustproof, 50000+ hours life-span, 90 DAY WARRANTY..

Check Stock

LED | Hitch Receiver Cover | Brake Turn Running Light | Trailer Tow

★【BRAKE LIGHT】APPLY YOUR BRAKE : The LED light shines bright!.
★【FOR EXTRA SAFETY】>>>>> ONE MORE LIGHT >>>【FOR EXTRA SAFETY】.
★【ATTACHES】 to your standard 4-pin electrical wiring harness and have LEDs with over 100,000 hours lifespan.
★【LED LONG LIFE】is an electric light for use in light fixtures that produces light using light-emitting diode (LED). LED lamps have a lifespan....
★【Keep Hitch Reciever CLEAN】An open trailer hitch is exposed to the elements that bring on the rust bug and accumulates debris that can clog the....

Check Stock

Wellmax LED trailer lights, Led boat trailer lights submersible, 12V utility marine trailer light waterproof and DOT approved

INCREASED SAFETY. These automotive LED indicator lights add safety and more visibility on the road when driving with a hitch cargo carrier or hitch bike rack. They plug into your vehicle and correspond to the taillights, turn signals and brake lights.
VERSATILE. These LED light strips can be used anywhere they're needed. With an adhesive backing, they can be installed on any hitch accessory or even a trailer. They're ideal for use as a bike rack light bar or trailer hitch cargo carrier lights.
EASY TO INSTALL. The adhesive backing of this cargo carrier light kit makes it easy to install on virtually any surface. Just stick the strips into place! The lights are right and left-specific.
STANDARD CONNECTION. These automotive LED light strips easily plug into any standard 4-way flat connector.
COMPLETE KIT. This LED light kit comes with two LED light strips, adhesive backing for each strip and wiring harnesses for a complete installation.

Check Stock

Keyecu 12 LED Tail Brake Light with 2\ Red Lense Trailer Hitch Receiver Cover for Towing Hauling Truck SUV RV 12V

★Built-in super bright red lens LED brake light provides added safety when your hitch is not in use.
★Lamp size: 3-1/4 x 3-1/4 inches to fit 2" standard tow hitch and function as tail brake light or rear fog light.
★Lamp comes with 1/4" foam lining in order to ensure that the fit is snug and secure.
★Comes with an extra long 12" wire with a flat 4-pin trailer connector and hitch pin with lock for a successful installation.
★If you wanted to add more utility lights to your truck, then this rear fog light is a great choice.

Check Stock

EPARTS Universal Smoke Lens 12-LED 2\ Trailer Truck Hitch Towing Receiver Cover Brake Light Lamp

Fits: Universal Fit All SUV Pick-up Truck / 2" Inch Receiver.
PACKAGE INCLUDES: 1x Trailer Hitch Brake Light Installation instructions might not be included in this package.
Made From High Quality ABS Plastic 2" Tube Diameter.
12-LED Trailer Brake Light W/ Standard 4-Pin.
Dimension: 3.15(H) x 3.15"(W) x 4.06"(L).

Check Stock

Autogem Officially Licensed RAM Hitch Cover Black

Long life LED light powered Dodge Ram tailgate emblems.
Add a stylish touch to your vehicle with Officially licensed, LED Lighted Hitch Cover For a clean look, use an extension to place the wire behind the bumper on certain models..
Light-up insignia activates when running lights are on and brightens when brake pedal is pressed (Low illumination while you’re using tail lights & High illumination when you brake or turn on the hazard lights).
Durable plastic is corrosion resistant, Fast, easy installation-Some drilling required.
Wiring harness plugs into your vehicle’s existing 4-pole trailer connector & Hitch cover slides into receiver, keeping out dirt and grime..

Check Stock

CURT 13394 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Lexus RX350L, Toyota Highlander

It is a Class III Hitch with a 2” Tube and includes the 4 pin Wiring Harness. This item does NOT contain a trailer ball and hitch pin & clip. This item ONLY contains the hitch and harness..
DEPENDABLE STRENGTH. This trailer hitch is rated for 3, 500 lbs. gross trailer weight, 525 lbs. tongue weight, 4, 000 lbs. weight distribution capacity and 525 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
COMPLETE KIT. This towing kit includes a class 3 hitch with h....

Check Stock

Autogem Officially Licensed Chevy Hitch Cover LED Light Hitch Receiver Covers Black

Long life LED light powered Chevy hitch cover and Easy hook-up no tools required.
Wire Length: 19inch Mounting brackets and hardware included for both 1-1/4″ and 2″ receiver tubes for Chevy Truck.
Light-up chevy emblem activates when running lights are on and brightens when the brake pedal is pressed.
Hitch cover slides into receiver, keeping out dirt and grime-Chevy Hitch Cover.
Wiring harness plugs into your vehicle’s existing 4-pole trailer connector.

Check Stock

CURT 17200 Trailer Anti-Sway Bar Control Kit , Black

IMPROVED CONTROL. This trailer sway control kit helps limit your trailer’s lateral movement, using a brake pad type material to restrict and deter trailer sway.
VERSATILE. This trailer sway bar is compatible with a wide variety of weight distribution hitches, including almost all CURT weight distribution hitches. It can also be used on most A-frame trailers.
HIGHLY ADJUSTABLE. This sway bar hitch easily adjusts for different trailer types and load sizes. It uses a simple hex nut toggle to adjust the level of trailer sway restriction.
EASY SETUP. Setting up this trailer sway control unit with your weight distribution hitch is fast and easy. With the included trailer balls mounted in place, the simply on-off handle makes it easy to engage or disengage the sway control whenever needed.
COMPLETE KIT. This anti trailer sway bar includes everything needed for installation on your camper or RV as well as your weight distribution hitch or sway tab ball mount #45820.

Check Stock

CURT 99308 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Subaru Outback

COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Subaru Outback..
DEPENDABLE STRENGTH. This trailer hitch is rated for 4, 000 lbs. gross trailer weight and 600 lbs. tongue weight (limited to lowest-rated towing component)..
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..

Check Stock

CURT Class 3 Trailer Hitch Bundle with Wiring for 2014-2016 Toyota Highlander - 13200 & 56217

COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Toyota Highlander..
DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..

Check Stock