Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded
- Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
- Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
- The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
- Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
- 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check StockSeachoice Trailer Coupler, Repair Kit, 2 in.
- Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
- Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
- 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
- Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
- Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....
Check StockSemi Truck Spare Tire (or Tire and Rim) Carrier, Adjustable, Powder Coated, Universal Fit, STAR Fabrication, 3510,
- Trailer U-Bolt Spare Tire Holder Bracket made of grade 8.8 steel, Zinc Plated, beautiful and practical..
- U-Bolt Length: 8-1/2'', Width:3-1/4'' - 3-3/4'', Thread Diameter: 7/16-20 UNF, Thread Length: 3''. Fits trailer frames up to 2" or 3" wide.
- For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2). Thread diameter 7/16-20 UNF..
- Put bolt around trailer throat and tighten.Tire is mounted along side of trailer protect..
- The device is very basic, but it fit perfectly around the trailer throat, and also on the tire rim.This carrier easily installs to secure your tires..
- The kit provides the u-bolt and two nuts. Thread diameter 7/16-20 UNF. Note: Please confirm your tire size..
Check StockLIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit
- 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
- It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
- Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
- 2 x tie plates for 1-3/4" or 2" leaf springs.
- Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
- LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check StockLIBRA 3500lb Tandem Trailer Axle Suspension Kit Leaf Springs U-Bolt & Hanger Kit
- 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
- It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
- Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
- Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
- LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check StockTHEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)
- THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance..
- The groove design prevents the battery from contacting the tray fasteners.
- the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need..
- [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77.
- [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R.
- [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55.
Check StockOnesnt E-Track 4 PCS J Hooks Fitting Enclosed Trailer Cargo Management, Tie Down E-Track Systems in Trucks, Trailers, Vans, with E-Track Spring Fitting Attachments
- 1.DURABLE ETRACK J HOOKS - TRUCK & TRAILER HANGER TIE-DOWN ACCESSORIES WITH SPRING FITTINGS.
- each hook has a safe assembly strength of 1,200 pounds..
- 2.THESE HOOKS ARE ONLY FOR E track rails and singles (NOT INCLUDED, available separately) and are also compatible with the E track enclosed trailer accessories cargo tie down system.
- 3.These Etrack tie-down hooks have easy THREE SECOND installation - just press the levers on the E track fittings and insert into standard 2.5" x 1" slots on any vertical or horizontal E TRACK trailer tie-down rails or singles..
- 4.IMAGES includes a detailed mechanical sketch. First, J-hook E-track tie downs have a 4.5" high front and back rods with 4.5 inches wide inner clearance to hang all trailer accessories.
- hooks may be gold or black. Second,J-hook E-track tie downs have a 4" high back rod and a 1.75" front rod with a 2 inch wide inner clearance to hang all trailer accessories.
- hooks may be gold or black, contact us to confirm if you are particular..
Check Stock3.5k-3500 Lb Capacity Trailer Axle Beam Only-Utility/RV/Boat (89\ Hubface-74 Spring Center)
- Rockwell American Tandem 3,500 lb Electric Brake Trailer Axles - Running Gear Set (7,000 lb Capacity) - Made in the USA.
- These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
- This Tandem Axle Kit comes with: (2) 3,500 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
- 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
- Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.
Check StockLIBRA 3500lb Single Trailer Axle Suspension Kit 1750lb Leaf Springs & Ubolt Kit
- 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
- It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
- Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
- LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check StockLucky Seven 20904439 GM Original Equipment Trailer Brake Continue Relay Assembly,20904439 Brake Control Relay,GM 20904439 Trailer Brake Control Relay Silverado Sierra
- UNIVERSAL ELECTRIC TRAILER BRAKES - Self-Adjusting Electric Trailer Brakes 1 right brake of the 12'' X 2'' Trailer Electric Brake Assembly.
- DIMENSIONS - 12'' diameter x 2'' wide, 5'' bolt circle, 3 1/4'' center hole diameter.
- BOLT PATTERN - Mounting flange bolt pattern: 5-bolt (each brake).
- HARDWARE - 10 x 3/8'' nuts and 10 x 3/8'' lock washers are included.
- M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check StockOnesnt E-Track Steel J Hooks Tie Down for X-Track Systems Tie Down Anchor Points Enclosed Trailers, Use as Hanger, Shelf Bracket, Support Beams, Trailer, Truck, Pickup, Cargo Van(Pack of 4 Black)
- 1.DURABLE SQUARE ETRACK J HOOK TRUCK & TRAILER HANGER TIE-DOWN ACCESSORY WITH SPRING FITTINGS.
- each hook has a safe assembly strength of 1,200 pounds..
- 2.THESE HOOKS ARE ONLY FOR E track rails and singles (NOT INCLUDED, available separately) and are also compatible with the E track enclosed trailer accessories cargo tie down system.
- 3.These Etrack tie-down hooks have easy THREE SECOND installation - just press the levers on the E track fittings and insert into standard 2.5" x 1" slots on any vertical or horizontal E TRACK trailer tie-down rails or singles..
- 4.LAST IMAGE includes a detailed mechanical sketch. These J-hook E-track tiedowns have a 4" high back rod and a 1.75" front rod with a 2 inch wide inner clearance to hang all trailer accessories.
- (Pack of 4) 2inch E-Track Heavy Duty J Hook Fittings - No Track Included.
Check StockDC Cargo Mall E-Track Large 7\ J Hook Tie Down Accessory (2 Pack) for Enclosed Trailer/RV for Helmets, Ropes, Motorcycle Jackets, Pipes, Hoses and Cables
- EXPAND YOUR TRAILER CAPABILITIES and make it so much more versatile and efficient by hanging your ladders, wires, hoses, ropes, buckets, and straps on this sturdy hook, to keep them secured on the wall of your trailer and off the floor and out of harm’s way. Its round shape is also perfect for hanging PVC pipes or other tubing. These hooks are only for e track rails and singles (NOT INCLUDED but worth having in trucks and warehouses!).
- KEEP YOUR TRAILERS & GARAGES NEAT AND SAFE – clear your workspace by using this great cargo hanger for hanging and storing your personal items in the back of your truck, such as hats, track motorcycle jackets, helmets, bags etc. instead of them lying on the floor and being tripped over..
- PREVENT YOUR THINGS FROM GETTING SCRATCHED OR DAMAGED with this long lasting J hook, made of a durable steel construction with a black powder coat finishing to resist rust and corrosion. MEASUREMENTS: These J-hook E-track tiedowns are 9” tall and have a 7-inch-wide inner clearance with a 1/2” diameter to hang all trailer accessories..
- FAST AND SECURE, HASSLE FREE: these DURABLE HEAVY DUTY Etrack J Hooks are great truck & trailer hanger tie-down accessories with easy spring fittings. They have an easy three second installati....
Check StockRockwell American Tandem 3,500 lb Electric Brakes Trailer Axle Kit w/Springs Ubolts Hanger Kit Wheels/Tires 89 Hubface 74 Spring Center
- Rockwell American Tandem 3,500 lb Electric Brake Trailer Axles - Running Gear Set w/ Wheels and Tires (7,000 lb Capacity).
- These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
- This Kit Includes: (2) 3,500 lb Electric Brake Trailer Axles with Hubs, Bearings, Lugs & Nuts (Assembled) (2 Year Warranty) (2) U-Bolt Kits, (1)....
- 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
- Replaces Dexter Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American"....
Check Stock