Categories

Best Trailer King Pin

Dumble 5th Wheel Tripod Stabilizer Gooseneck Trailer Jack - 5000lb Cap Adjustable RV Jack Stabilizer RV King Pin Tripod

  • ... Heavy Duty RV Stabilizer Jacks will minimize front-to-back and side-to-side motion so you can enjoy your everyday activities discreetly.
  • [Physics At Work]: Align gooseneck camper stabilizer jacks under the king pin of your camper or motorhome to lift the front end of your trailer and adjust the center of gravity.
  • 5,000-pound (2.5ton) weight capacity adds support and enhances stability.
  • [Built to Last]: Steel RV fifth wheel tripod stabilizer jack is powder-coated to resist elements and provide optimal durability.
  • Zinc-plated chain keeps RV stand legs aligned for optimal strength and reliability.
  • [Fits Your Needs]: 4.5-inch (11.4cm) tall cup has a 3-inch (7.6cm) internal diameter to fit the king pin on your travel trailer, camper, boat, and mobile home.
  • Threaded bar makes it easy to adjust the cup height.
  • [Adjust and Store Easily]: King pin 5th wheel stabilizer jacks adjust to heights between 39 and 57 inches (99.1 x 144.8cm).
  • When not in use, adjustable tripod folds to 7-inch (17.8cm) diameter for easy storage.
Check Stock

Reese 68220 Sidewinder Elite Fifth Wheel Coupler, 20K

  • The Sidewinders unique king pin locking mechanism moves the pivot position 22 in. rearward from the 5th wheel hitch.
  • Trailer automatically tracks more closely to the tow vehicle while keeping the load centered over the axles.
  • With the pivoting pin box design, you can hook up at nearly any angle.
  • Improved, robust design adds increased stability and strength to support heavier loads.
  • Tested for real world conditions, Sidewinder exceeds all REESE test standards.
Check Stock

UF Ultra-Fab Products 19-950001 Steel King Pin Tripod Stabilizer

  • Rock solid, stabilizes even the heaviest trailer and Stabilizes front-to-back and side-to-side.
  • Unique design brings the stabilizer to the king pin.
  • 5" x 5.5" footpads to combat sinking and tilting.
  • Adjustable hitch cup for fine tune adjustment with heavy duty steel construction.
  • Weighs just 23 pounds, Adjustable from 37" to 50", Padlock included.NOTE : Customers that have a 5th Wheel Sliding Hitch must remove the contact plate on the hitch pin before using the tripod to stabilize the 5th Wheel RV.
  • Now you can stabilize even the heaviest fifth wheel trailer for front-to-back and side-to-side motion.
  • The Kingpin Tripod is easy to use and sets up in less than a minute.
  • It features an adjustable threaded hitch cup for quick and effortless stabilizing adjustment.
  • Plus, the tripod's base footpads are a full 5" X 5-1/2" to combat against sinking and tilting.
  • Weighs just 23 pounds, adjustable form 42" to 50" and supports up to 5,000 pounds.
Check Stock

KAITWOSON Trailer Hitch Pin & Clip, 5/8-inch Diameter (Pack of 4)

  • MULTI-PERPOSE.The trailer hitch pin is compatible with 2 inch receiver handles and 5/8 inch pinholes on any ball mount or other trailer, making this receiver bolt pin suitable for most class 3, 4 and 5 trailer.
  • SIMPLE CONTROL.The flexibility of this trailer pin makes it easier to use and allows the pin to be securely held on the trailer tether and ball mounted.
  • CORROSION RESISTANCE.The pins and clips are protected by a durable galvanized coating for good rust and corrosion resistance. So you can safely use it for a long time.
  • RELIABLE STRENGTH.This 5/8 inch pin is made out of solid steel for reliable strength, the strength of this solid steel makes you feel safe every time you travel.
  • EASY INSTALLATIONS.To install the trailer hitch pin, simply insert the ball mount or other trailer hitch attachment shank into the hitch receiver on your vehicle. After the pins on the side of the receiver tube are aligned, insert the hitch pin.
Check Stock

CURT 21500 Trailer Hitch Pin & Clip, 5/8-Inch Diameter, Fits 2-Inch Receiver

  • VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches.
  • EASY TO GRIP. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • CORROSION-RESISTANT. Protected by a durable zinc-plated finish, this tow hitch pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time.
  • HIGH-STRENGTH. This 5/8-inch trailer hitch pin is made out of solid steel for reliable strength, safety on the road and confidence with every mile of your adventure.
  • SIMPLE TO INSTALL. To install this trailer hitch pin, simply insert your ball mount or other hitch accessory into the receiver on your vehicle. With the pin holes in the side of the receiver tube lined up, insert the hitch pin. Then, install the clip.
Check Stock

Kuryakyn 2595 Motorcycle Accessory: Plug & Play Trailer Wiring with Relay Harness for 2014-19 Harley-Davidson FLH/FLT Motorcycles with 5-Wire Trailer , Black

  • Allows you to safely and effectively apply the load from your trailer lighting the the battery.
  • Eliminates overloading stock lighting or accessory circuits.
  • Relay harness utilized inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.
  • Kit provides standard 5-wire output (run, brake, left turn, right turn, ground).
  • Does not include receptable kit due to varies style required by trailer manufacturer.
  • Includes (1) relay module 5 wire, (1) 5 pin trailer plug harness, (1) inline blade style fuse holder, and (1) hardware kit.
  • Suggested for installation (not included): wire stripper/cutter, wire crimpers, #2 phillips screwdriver, socket and ratchet set, in-lbs (Nm) torque wrench.
  • Compatible with 5-wire trailers on Harley-Davidson models: '14-'19 Electra Glides, Road Glides, Street Glides (excludes '14-'15 FLHTKSE, '15 FLTRUSE), and Road King Special.
Check Stock

CURT 21578 Black Trailer Hitch Pin & Clip 5/8-Inch Diameter Fits 2-Inch Receiver

  • VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches.
  • EASY TO GRIP. The 105-degree bend in this black trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • CORROSION-RESISTANT. Protected by a durable black zinc-plated finish, this tow hitch pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time.
  • HIGH-STRENGTH. This 5/8-inch trailer hitch pin is made out of solid steel for reliable strength, safety on the road and confidence with every mile of your adventure.
  • SIMPLE TO INSTALL. To install this trailer hitch pin, simply insert your ball mount or other hitch accessory into the receiver on your vehicle. With the pin holes in the side of the receiver tube lined up, insert the hitch pin. Then, install the clip.
Check Stock

TOPSKY TS2101 Trailer Hitch Pin & Clip, 5/8 Inch Pin Diameter, Fits 2 Inch Receiver

  • MULTI-PERPOSE: The 5/8 inch diameter of hitch pin is compatible with any ball mount or other trailer hitch accessories with 2-inch shank and 5/8 inch pinhole, making this receiver hitch pin fit for most class 3, 4, and 5 trailer hitches..
  • SIMPLE CONTROL: The flexibility of this trailer hitch pin makes it easier to use and allows the pin to be safely held in the trailer hitch and ball mount..
  • CORROSION RESISTANCE: Protected by a durable galvanized coating, these two hitch pin needles maintain good rust and corrosion resistance and trouble-free use each time..
  • RELIABLE STRENGTH: This 5/8 inch trailer hitch is made out of solid steel for reliable strength, the strength of this solid steel makes you feel safe every time you travel..
  • EASY TO INSTALL: To install the trailer hitch pin, simply insert the ball mount or other trailer hitch attachment shank into the hitch receiver on your vehicle. After the pins on the side of the receiver tube are aligned, insert the hitch pin..
Check Stock

CURT 25080 Trailer Coupler Pin, 1/4-Inch Diameter x 2-3/4-Inch Long

  • VERSATILE. The 1/4-inch diameter and 2-3/4-inch length of this coupler safety pin make it highly versatile to fit a wide variety of trailer couplers. It can also be used for a trailer jack wheel, pintle hook and more.
  • SECURE. This coupler safety pin provides a reliable solution for keeping your trailer coupler latch engaged with the trailer ball. The solid pin offers ample strength while the retainer clip ensures the pin will not vibrate or rattle free.
  • EASY TO USE. The square retainer clip of this trailer coupler pin is made with spring steel, making the clip semi-flexible for easy operation. With the safety pin inserted in the coupler latch, the square retainer easily clips on to the end of the pin.
  • CORROSION-RESISTANT. Protected by a durable zinc-plated finish, this coupler safety pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time.
  • HIGH-STRENGTH. The 1/4-inch trailer coupler pin is made out of solid steel for reliable strength, safety on the road and confidence with every mile of your adventure.
Check Stock

CURT 25470 QuickPin No-Latch Trailer Coupler for 2-Inch Hitch Ball, 2-in Channel, 3,500 lbs

  • ONE-PIN COUPLING. QuickPin is an innovative trailer coupler engineered to provide fast, hassle-free coupling with just one pin. It hooks up to your ball hitch simply by inserting the included 1/2-inch pin (included pin must be used, no replacements).
  • NO LATCH. QuickPin is far easier to use than traditional trailer tongue couplers because it doesn't use a latch. No more jamming, frustration or complicated hinging components prone to wear out.
  • NO ADJUSTING. QuickPin also doesn't require adjustments or tightening like traditional latch-style trailer couplers. Just drop the trailer tongue onto the hitch ball, insert the provided pin, and that's it.
  • SECURE CONNECTION. This trailer hitch coupler can be mounted onto virtually any 2-inch wide trailer tongue beam, and it accepts a standard 2-inch diameter trailer ball (trailer mounting hardware not included).
  • THOROUGHLY TESTED. Tested to SAE J684 specs and rated for 3,500 pounds gross trailer weight, this trailer coupler ensures a safe, reliable towing connection.
Check Stock

CURT 21400 Trailer Hitch Pin & Clip, 1/2-Inch Diameter, Fits 1-1/4-Inch Receiver

  • VERSATILE. The 1/2-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 1-1/4-inch shank and 1/2-inch pin hole, making this receiver hitch pin a perfect fit for most class 1 and class 2 hitches.
  • EASY TO GRIP. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • CORROSION-RESISTANT. Protected by a durable zinc-plated finish, this tow hitch pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time.
  • HIGH-STRENGTH. This 1/2-inch trailer hitch pin is made out of solid steel for reliable strength, safety on the road and confidence with every mile of your adventure.
  • SIMPLE TO INSTALL. To install this trailer hitch pin, simply insert your ball mount or other hitch accessory into the receiver. With the pin holes in the side of the receiver tube lined up, insert the hitch pin and install the clip.
Check Stock

CURT 23582 Stainless Steel Swivel Trailer Hitch Pin, 5/8-Inch Diameter, Fits 2-Inch Receiver

  • NO CLIP NEEDED. The unique, integrated swivel clip of this hitch pin eliminates the need for a separate hitch clip. There's no risk of losing the clip because it is permanently attached and always right there when you need it.
  • VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches.
  • EASY TO HANDLE. The 105-degree bend in this swivel trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • NON-CORROSIVE. This tow hitch pin is constructed from stainless steel to ensure dependable strength and long-lasting corrosion resistance in spite of the elements.
  • SIMPLE, SECURE INSTALL. To install this swivel trailer hitch pin, simply insert your ball mount or other hitch accessory into the receiver. With the pin holes in the side of the receiver tube lined up, insert the pin and turn the clip.
Check Stock

CURT 21510 Trailer Hitch Pin & Clip with Vinyl-Coated Grip, 5/8-Inch Diameter, Fits 2-Inch Receiver

  • COMFORTABLE GRIP. The handle on both the hitch pin and hitch pin clip are vinyl-coated to allow for more comfortable handling and a better grip.
  • VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches.
  • EASY TO HANDLE. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • CORROSION-RESISTANT. Protected by a durable zinc-plated finish, this tow hitch pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time.
  • HIGH-STRENGTH. This 5/8-inch trailer hitch pin is made out of solid steel for reliable strength, safety on the road and confidence with every mile of your adventure.
Check Stock