Categories

Best Transformer Oil Treatment Equipment

Sealproof 1/2-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 1/2\ Dia, 100 Feet, Made in USA

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

10Pcs Audio Transformers 600:600 Ohm 1:1 EI14 Isolation Transformer

  • 5kVA STEP-DOWN ISOLATION: 5kVA 5kW transformer converts UPS, utility, generator or other 208V input to 120V for powering low-voltage AC components..
  • 12-OUTLETS: It features 12 NEMA 5-15/20R outlets for connecting equipment with common NEMA 5-15P and NEMA 5-20P plugs. Four resettable 20A circuit breakers protect your low-voltage equipment against overload conditions. One NEMA L6-30R outlet supports high-voltage output. The 5kVA transformer’s 10-foot power cord with 208V 30A input connects to a NEMA L6-30R outlet..
  • 2U INSTALLATION: Hardware is included for mounting this 208V to 120V isolation transformer in 2U of space in an EIA-standard 19-inch 4-post rack with a maximum depth requirement of 20.75 inches..
  • TAA-COMPLIANT UPS: The voltage transformer is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases..
  • SU5000XFMR2UTAA SmartOnline Step-Down Isolation Transformer.
Check Stock

1/2\ liquid tight connector 90 degree 20 pack

  • Size & Quantity: 10Pack of NPT 1/2 Liquid Tight Connector..
  • Material:Liquid Tight Connector are made of high quality nylon,Resistant to salt water,weak acid,alcohol,oil,grease and common solvency..
  • Features:The claws and seals of excel lent design,can hold cable firmly and have a wider cable range..
  • Easy to Install:They attach easy to the box and secure tightly to the flex conduit.no diassembly , just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Widdly Used：Nice tight fit for outdoor electrical box,marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting etc..
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia

  • Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 3/4-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 3/4\ Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

White Lightning (I Mean Moonshine) [feat. The J.B.'s]

  • - Enclosed, non-isolated, Adjustable transformer, with Output Volt Meter.On/Off Power Switch(Lighted),5A fuse & power cord..
  • - Over-voltage protection, the use of more security.Contact voltage transformer, wide voltage range (0-130V).
  • - Built-in copper coil, material quality, more secure and durable.High efficiency and with no waveform distortion..
  • - Suit for home coffee roasting,Motor Speed control,Label Printing Machine,EE Labs,Test for Railroad Switching, Power Supplies, Satellite,Equipment,Telecommunication Equipment..
  • Please note that most device have surge (when first turn on) much higher than operating amp rating. E.g, motor with 5 amp rating may have over 10 amp surge, and you will need 10 amp transformer..
Check Stock

Sealproof 1-Inch Non-metallic Liquid-Tight Conduit and Connector Kit, 25 Foot Made in USA Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1" Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike

  • 5L oil liquid suction pump extractor,Small size, easy to carry and storage.
  • Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
  • Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm.
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
  • Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.
Check Stock

Yonntech 5000 Watt Voltage Converter Transformer with Circuit Breaker Protection Step Up/Down 110V/220V Heavy Duty

  • This 5000w step up/down voltage transformer: step up voltage from 110-120 volts to 220-240 volts.
  • step down voltage from 220-240 volts to 110-120....
  • The voltage transformer 5000w is worldwide used for all electronics, heavy duty machines, household and industrial applications.Almost fits all your....
  • This transformer features circuit breakers which protect the equipment and the transformer against overload. With circuit breaker protection you'll....
  • The power converter is with high quality coil,so it is not easy to heat and can withstand higher currents. And the cooling grille design can dissipate....
  • For safety, it recommended to use a voltage converter that's max watts is at least 80% higher than your appliance. For example: 5000w transformer can....
Check Stock

UMI AV250 Isolation Transformer 250W Noise Filtering and Surge Suppression and Power Clean 2 Outlet

  • 1. Power Clean: Complete line isolation, Eliminate EMI/RFI line noise and provide clean power for sensitive equipment.
  • 2. Isolation Transformer: Toroidal transformer and Faraday Shield, reduce the static interference from the wall outlet.
  • 3. Power supply: 120V AC input and 120V AC output.
  • 4. 2 outlets: allow to use 2 equipment at same time and a power strip for more.
Check Stock

Mophorn 500VA Variable Transformer 110V 60Hz Input Voltage Digital Display 0-130V Output Automatic Voltage Regulator for US Plug…

  • High Quality Cooper Coil: The voltage transformer is constructed with built-in copper coil for durability and high efficiency..
  • AC Power Supply Adjustable: This is a brand new variable transformer. Input is single phase 110V AC, 60 Hz, output voltage can be adjusted from 0 to 130V AC. Maximum power rating is 500VA..
  • Compact & High Accuracy: Featuring clear voltage output meter, and precise metal pressure gauge, the variable transformer is designed with high grade accuracy and compact for easy transport..
  • Security Protection: Featuring a high accuracy, reliability and perfect limit current protection, thermal protection, voltage overload protection, short-circuit protection. A grounding port designed onto the device for much more stable and secure protections..
  • Wide Application: Widely used for motor speed control, label printing machine, labs, test for railroad switching, power supplies, satellite, equipment, telecommunication equipment, etc..
Check Stock