Best Transmission Coupling
Axe Cutting Wood with Impact Version 4
- Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x 100 mm working area also contributes to an excellent cutting and milling performance..
- Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and improve accuracy. Help you achieve higher performance and better control..
- Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle manually. You can also connect it to a computer via the USB interface, implementing more steps..
- Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a cooling effect. Besides, it also features hard-wearing and never rust, prolonging life service..
- Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft aluminum, acrylics, PVC, PCB, etc..
Check StockTopping HS01 USB 2.0 High Speed Audio Isolator Compatible with PCM32bit 768kHz DSD512 withstands up to 1kVRMS
- Leading innovation - Previous isolators were limited to Full Speed (12 MBit/s) and Low Speed (1.5 MBit/s) transmission. This product is capable of....
- USB2.0 High Speed - HS01 supports USB2.0 High Speed transmission, which is compatible with high-resolution audio transmission such as PCM32bit/768kHz....
- Low latency - The latency is only 0.29us, which fully meets hifi and professional applications' needs. Note: Generally, the latency of USB device is....
- Galvanic Isolation - This product is an ideal solution to break ground loops, avoid noise coupling and protect ports from power surges and voltage....
- Precautions - When the device connected to HS01 exceeds the current output capability, an external auxiliary power supply can be used. Please note....
Check Stockuxcell Shaft Coupling 14mm to 14mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
- Shaft Usage: 14mm to 14mm/0.55 inch to 0.55 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stockuxcell 6mm to 12mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stockuxcell Shaft Coupling 12.7mm to 12.7mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
- Shaft Usage: 12.7mm to 12.7mm/0.5 inch to 0.5 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stockuxcell 5mm to 6.35mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check StockBushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit
- Kit includes replacement bushing and application specific installation tools..
- Text and video instructions along with tech support make installation very easy..
- Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check StockZeberoxyz 2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling Diameter25mm Length30mm 5x8mm Motor Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor(5x8mm)
- Size:L30mm x D25mm/1.18inch x 0.98inch( L*D), Bore Diameter: 5mm to 8mm / 0.2inch to 0.31inch.
- Material: Aluminum alloy, Surface oxidation treatment.
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen.
- Flexibility of coupling shaft removes stress between the motor and driving components, The coupling can be disassembled and used in combination by itself.
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check StockZeberoxyz 2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling Diameter20mm Length25mm 5x8mm Motor Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor(5x8mm)
- Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Bore Diameter: 5mm to 8mm / 0.19inch to 0.31inch.
- Shaft Coupler Material: Aluminum alloy, Surface oxidation treatment.
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen.
- Flexibility of coupling shaft removes stress between the motor and driving components, The coupling can be disassembled and used in combination by itself.
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stockuxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
- Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D).
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check StockVEVOR CNC Router Machine 4030 Engraver Milling Machine with Offline Controller Limit Switches Emergency-stop DIY 3 Axes Cutting Kit for Wood Metal Acrylic MDF 400 x 300 x 100 mm Large Working Area
- Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x....
- Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and....
- Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle....
- Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a....
- Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft....
Check Stock9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm
- Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
- Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stockuxcell 5mm to 8mm Bore One Diaphragm Motor Wheel Flexible Coupling Joint
- Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Bore Diameter: 5mm to 8mm / 0.19inch to 0.31inch.
- Material: Aluminum alloy Type: Plum shaped.
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen.
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stock