YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock

Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator

  • Features a 2.3 gallon (8.8 liter) capacity air operated fluid evacuator for large jobs.
  • Automatic shut-off valve prevents overfilling.
  • Can be used to extract a wide-range of fluid types from transmission fluid, coolant, brake fluid, gear to engine oil.
  • Reservoir is constructed of durable polyethylene and will not rust or corrode.
  • Kit comes with 5 feet of flexible hose, dipstick tubes and a universal brake-bleeding adapter.
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
  • Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
  • Manually suction fluid with the engine oil....
  • Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max....
Check Stock

OEMTOOLS 24397 9.5 Liter Fluid Evacuator

  • MULTIPURPOSE EXTRACTOR: Designed to extract engine, transmission and lubricating oils from cars, motorcycles, marine engines and industrial machinery..
  • VERSATILE APPLICATIONS: Extracts oil and low-viscosity fluids, such as water and coolant..
  • EASY-TO-USE: Specialized 31.25” adapter extracts fluids directly from the dipstick tube..
  • MINIMIZE CLEAN-UP TIME: 2.5 Gallon (9.5L) fluid reservoir features a dependable single-piece construction to drastically reduce oil and fluid spills during fluid maintenance jobs..
  • OVERFLOW PROTECTION: Shut-off valve prevents fluids from overflowing..
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

TRANSMISSION FLUID DIPSTICK - TOOL - | For: select chrysler dodge jeep vw vehicles. | W/Instructions + Cap O-ring | auto trans : 8863B, 9336, 42RLE, NAG1, 62TE 2.7 3.5 3.6 3.7 5.7 6.1 6.4

  • SAME TOOL THE DEALER USES:【For select chrysler dodge jeep vw vehicles】Level Measuring tool Designed to check and adjust ATF fluid on your vehicle. / Allows you to check fluid level without going to the Dealer..
  • 【 PREMIUM TOOL 】Allows you to Check Level on 2.7 , 3.5 , 3.6 3.7 , 5.7 , 6.1 , 6.4 Engines that ORIGINALLY CAME WITHOUT A DIPSTICK. without going to the Dealer..
  • 【TRANSMISSION / TRANY KIT】Dip stick Tool, Instructions / directions . New o-ring for the sealing Cap.
  • 【 USE 】Easy To Read light colored scale with clear markings. As with the Genuine Dealer Tool (9336), this dipstick is used to measure the fluid level, and then removed and cap put back on the tube. Directions included will let you check your fluid level Cold or Hot or with a scan tool..
  • 【WARRANTY】This Tool has been made to stringent quality standards with a LIFETIME Replacement Warranty.
Check Stock

EWK 6.5L Manual Oil Extractor Pump Vacuum Oil Changer for Automobile Fluids Evacuation

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Easy Operation 】 The manual fluid evacuator requires no other equipment to use with. With a good number of strokes on the sturdy handle, the pump will create vacuum that triggers a powerful suction to help you change oil efficiently..
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

EWK Patented 10.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
Check Stock

KATUMO Gasoline Siphone Hose, Gas Oil Water Fuel Transfer Siphon Pump, Portable Widely Use Hand Fuel Pump, Fuel Transfer Pump with 2 Durable PVC Hoses

  • ...stick tube sucks oil from any vehicle - Easy Assemble/Disassemble of the fuel siphon pump is great for efficient cleaning..
  • ✓ USES: Easy large hand vacuum pump with intake & discharge transfer system for motor oil changes, overfilled tanks, off season storage, refueling empty tank from gasoline container, draining transmission petrol fuel, diesel & gas from cars, trucks, tractors, snow blowers, boats, lawnmowers & outdoor power equipment, or draw water from aquarium tanks, unclog plumb toilet sewage, separate sediment when brewing beer or wine – inflate tires, balloons with the air pressure adapter..
Check Stock

Trac Outdoors Hand Held Fluid Extractor - Ideal for Nearly All Forms of Fluid Extraction - Includes Cap, Adapters and Hoses (69360)

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
Check Stock

Automatic Transmission Dipstick for Chrysler Jeep Dodge - Level Tool with Directions Check auto Trans Fluid Oil Level -Dealer #s : 8863B, 9336, 9336A, 42RLE, NAG1, 62TE 2.7 3.5 3.6 3.7 5.7 6.1 6.4

  • EASY TO READ :Clear marks on the metal tip promise easy-to-read oil levels..
  • Cross Ref: 8863B, 9336, 9336A, 917-327 42RLE, NAG1, 45RFE, 62TE..
  • USING: Insert dipstick into transmission fill tube until the tool bottoms out and then pull out, read fluid level. Don't stay dipstick in the car. DO NOT leave tool inside the dip stick tube when finished with level check..
  • THE BEST PRICE & QUALITY: Reasonable price with OEM quality, saves your dollars from dealer..
  • WHAT YOU'LL GET: 1x dipstick+1x manual instructions, Place order with 100% confidence, we provide 1 click refund for our valued customers in 3month. If you encounter a problem, please do not cause it, please contact me directly..
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • ... MAKES LIFE EASIER - Pumps oil out throw dip stick, no need to lay under your car. Warmed up the engine of each and used this to extract the old oil an then replaced it with new. The fluid oil change pump extractor saves you a lot of time and effort. No need to get under vehicle to drain the transmission fluid..
Check Stock